Formica IdealEdge 7732-58 Butterum Granite Matte Finish Double Radius Edge Molding, 1-1/2" H x 144" L

Formica IdealEdge Butterum Granite Laminate Edge

Formica IdealEdge Butterum Granite is a laminate edge molding that finishes exposed countertop, island, desk, and workstation edges in a matching Butterum Granite matte surface. The double radius profile shapes both top and bottom corners, which creates a smooth, rounded front that aligns visually with the laminate surface. The molding is 1-1/2 inches high, so it covers the substrate edge while giving clear layout dimensions for planning build-ups and overhangs. A 12 foot length lets you run long stretches of edge in a single piece, which reduces seams along straight runs. The edge uses an MDF core, so it can be machined and trimmed with typical shop tools. A moisture barrier is built into the construction, giving added protection at the edge where spills and routine cleaning often concentrate.

Key Details That Support Finished Countertop Work

• The 1-1/2 inch height sets a clear edge dimension, so installers can coordinate laminate layup and substrate thickness for a consistent reveal along countertops, islands, desks, and workstations.
• The double radius profile finishes both top and bottom edges, which softens the front corner and helps create a continuous look with the Butterum Granite matte laminate on the horizontal surface.
• The Butterum Granite matte finish matches the Formica pattern and sheen, so fabricators can extend the same visual across face edges without switching materials or patterns.
• The 12 foot length supports long edges in a single run, which minimizes joints that otherwise demand extra fitting, trimming, and visual blending during fabrication.
• The MDF core works well with standard woodworking processes, so trimming, mitering, and fitting can follow familiar laminate and millwork shop methods for predictable results.
• The moisture barrier at the edge provides an added layer of defense in spill zones, which supports long-term performance at sink runs and high-use work surfaces.

Installation Traits For Laminate Edge Fabrication

This Formica IdealEdge laminate molding is designed for use on straight, curved, clipped, and 90 degree edges, so one profile can serve a range of plan layouts on countertops, islands, desks, and workstations. The MDF core responds well to typical cutting and shaping processes, which supports detailed work at inside corners and radius sections. The product is specified for use with AFF522 series glue, sold separately, providing a matched adhesive recommendation for bonding. The 1-1/2 inch height simplifies planning of build-ups at front edges, while the double radius shape defines the front contour in a single component. The 12 foot length helps streamline measuring, dry-fitting, and trimming sequences on larger runs without piecing together multiple short segments.

Using This Double Radius Edge In Real Projects

Where This Laminate Edge Molding Fits Best

This laminate edge molding is intended for use on countertops, islands, desks, and workstations that use Formica Butterum Granite matte laminate. It can be applied on straight runs, where the 12 foot length allows long, clean lines, and on curved or clipped layouts where the profile follows the plan shape. At 1-1/2 inches high, the molding covers the exposed substrate edge at typical countertop build-ups, giving a consistent band of matching Butterum Granite finish. The double radius profile addresses both the top and bottom edges of the front face, which is especially useful on open islands and workstations where the underside of the front edge is visible. Across these applications, the Butterum Granite matte finish keeps the visual continuous from deck to edge, which supports coordinated design on multi-surface installations.

Details That Support Clean, Repeatable Install Results

The MDF core of this IdealEdge profile allows controlled trimming, routing, and mitering, which helps installers align joints and transitions at corners. The moisture barrier construction supports edge performance in everyday spill areas, which is important around sinks and high-use work surfaces where water and cleaning pass repeatedly across the front edge. The specified use of AFF522 series glue, sold separately, provides a defined adhesive pairing, which supports consistent bond behavior along the full 12 foot length. The 1-1/2 inch height standardizes the visible edge dimension, simplifying layout when repeating the same profile across multiple tops in a project. Because the same product is suitable for straight, curved, clipped, and 90 degree edges, shops can streamline setups by working with a single Butterum Granite double radius profile across different plan conditions.

Common Questions About This IdealEdge Molding

Choose This Edge Molding For Butterum Granite Runs

The Formica IdealEdge Butterum Granite double radius molding gives a 1-1/2 inch high, Butterum Granite matte band that lines up visually with matching laminate tops. With a 12 foot length, MDF core, and moisture barrier construction, it supports practical fabrication of straight, curved, clipped, and 90 degree edges. For projects using Butterum Granite laminate on countertops, islands, desks, or workstations, this edge molding provides a defined profile and surface match that supports efficient shop workflows and consistent finished results.