
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Formica IdealEdge White Ice Granite defines this double radius laminate edge molding as a purpose-built solution for finishing laminate countertops, islands, desks, and work stations using a coordinated White Ice Granite look. The IdealEdge design gives a finished look on all sides, so exposed laminate edges around a run, corner, or overhang present the same decorative profile for a consistent appearance on a project. The 1-1/2 inch height works with common laminate build-ups, helping installers match the edge to typical countertop thicknesses when planning layouts. A 144 inch, or 12 foot, length lets fabricators span long runs or multiple shorter sections from one piece, which can reduce seams along straight edges. The moisture barrier MDF core supports the laminate edge in typical kitchen and work area conditions, adding structure behind the decorative surface where spills or cleaning are common. An Artisan finish coordinates with Formica laminate in the same finish family, so surfaces and edges can be matched visually across a job.
This Formica IdealEdge laminate edge molding is suitable for straight, curved, clipped, and 90 degree edges, so one profile can be applied across most edge conditions on countertops, islands, desks, and work stations. The design works with laminate fabrication workflows where the installer bonds the molding using adhesive, then trims and finishes edges. Recommended glue from the AFF522 series, sold separately, gives installers a specified adhesive family for this edge, which helps align material selection with Formica guidance during bonding. The 12 foot length supports shop setups that prefer to run long pieces through saws and routers for accurate cuts and profiling before fitting on cabinets. The moisture barrier MDF core works well with common woodworking tools, supporting cutting, routing, and edge cleaning as part of standard laminate top fabrication.
This Formica Corporation IdealEdge double radius edge molding is designed for use on countertops, islands, desks, and work stations, so it fits typical residential and commercial laminate surface layouts. The White Ice Granite pattern and Artisan finish coordinate with Formica laminate options in the same design family, allowing tops and edges to present a unified look across the installation. Because the IdealEdge profile gives a finished look on all sides, fabricators can run it along straight stretches, wrap it around 90 degree corners, or form it around curved or clipped corners while keeping the same decorative edge visible from any approach. The 1-1/2 inch height supports edge coverage on standard laminate build-ups around these applications, supporting full coverage of the substrate along the face of the top.
The 144 inch length helps installers plan layouts for long islands or continuous counters without breaking the decorative line at every cabinet joint. On desks and work stations, one length can often serve multiple pieces, so offcuts become useful edge sections for shorter runs. The moisture barrier MDF core supports these varied applications by giving the laminate profile a stable backing along its full length, helping it respond predictably as it is cut to match cabinet and substrate shapes in kitchens, offices, or shop environments.
This laminate edge molding uses a double radius profile, which creates two rounded transitions instead of a single sharp corner, giving installers a defined contour to follow when routing and flushing edges for a smooth hand-feel along the countertop. The IdealEdge construction with a finished appearance on all sides simplifies orientation during installation, since either exposed side presents as a completed edge when a counter is viewed from different positions. A 1-1/2 inch high profile offers a consistent datum for setting up saw fences, router tables, or jigs, aiding repeatable cuts across multiple pieces in a production run.
The moisture barrier MDF core is suited to woodworking equipment, so fabricators can cut miters, returns, and joints using saws and routers already in their shops while maintaining the structural support behind the laminate. Recommended glue from the AFF522 series, sold separately, gives fabricators a clearly identified adhesive type to pair with this edge during lamination steps, supporting bond consistency across a job. Together, these verified details let installers integrate the Formica IdealEdge White Ice Granite molding into existing laminate countertop and work surface workflows with predictable handling from rough cutting through final edge finishing.
The Formica IdealEdge White Ice Granite piece is a laminate edge molding with a double radius profile, used to finish the edges of laminate countertops, islands, desks, and work stations in the matching White Ice Granite design.
This laminate edge molding has a height of 1-1/2 inches and a length of 144 inches, giving installers a full 12 foot run for long counters or multiple shorter edge sections cut from one piece.
This Formica edge molding is for use on countertops, islands, desks, and work stations and is suitable for straight, curved, clipped, and 90 degree edges, allowing one profile across various edge conditions.
This White Ice Granite IdealEdge molding uses a moisture barrier MDF core, providing a stable substrate for machining and bonding in typical countertop, desk, and work station environments where moisture exposure can occur.
The Formica IdealEdge 9476-43 molding uses an Artisan finish, aligning with Formica surfaces in the same finish family so the edge appearance coordinates with matching laminate tops on the same installation.
This edge molding has a recommended glue from the AFF522 series, sold separately, which provides an identified adhesive option when bonding the laminate edge during fabrication of countertops and related surfaces.
The Formica IdealEdge White Ice Granite double radius laminate edge molding pairs a 1-1/2 inch profile, 12 foot length, and moisture barrier MDF core with a finished-on-all-sides design for laminate countertops, islands, desks, and work stations. When a project calls for the White Ice Granite pattern in an Artisan finish and a consistent double radius profile around straight, curved, clipped, and 90 degree edges, this molding aligns with that specification. Add this Formica Corporation edge to your order to match tops built with coordinating White Ice Granite laminate so edges and surfaces work together on the completed installation.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | AFF522-1G Mfr# F-522-01 | F522 IdealEdge Fastset Wood Glue, White, 1 Gallon Jug |