
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Pro Value Series steel knob gives a compact bar-style grip that works well on cabinet doors and drawers where a straight pull is preferred. The knob is part of the Bar Pull collection, so its bar form supports a consistent modern look across matching hardware runs. Steel construction provides a solid feel in the hand, which helps doors and drawers track predictably when opened. The satin nickel finish delivers a muted metallic surface, which helps this knob sit comfortably against many cabinet finishes without drawing excessive attention. With a length of 1.5625 inches, the knob offers enough bar to catch with fingertips while keeping spacing tight on smaller drawer fronts. A width of 1/2 inch keeps the profile slim, which is useful where hardware must clear nearby edges or adjacent doors in tight cabinet layouts.
This satin nickel bar knob is sized for tight, repeatable cabinet layouts, with a length of 1.5625 inches that fits comfortably on standard door stiles and drawer rails. The 1-1/4 inch projection sets the bar out from the face, so fingers can pull straight without rubbing the cabinet surface, which reduces finish wear around high-traffic grips. At 1/2 inch wide, the bar keeps clearance between neighboring fronts, which is helpful in banks of drawers where fronts sit close together. The knob is designed for use with an 8-32 x 1 inch screw, tying it to a common cabinet drilling and threading standard that many installers use across multiple jobs. This combination of dimensions and mounting thread supports straightforward alignment with existing cabinet boring patterns and common jigs.
The Pro Value Series steel knob from the Bar Pull collection fits cabinet and drawer applications that call for a small, linear grip rather than a round or ornate profile. Its 1.5625 inch length suits face frames and slab fronts where there is limited rail height, so it can sit comfortably without crowding panel details or door edges. The satin nickel finish coordinates with many satin nickel hinges and pulls in kitchen, bath, or built-in cabinetry, which supports a unified hardware look across a room. With a 1/2 inch width, the knob works well on narrow drawer fronts, utility cabinets, and smaller doors where a thicker pull could look oversized or interfere with adjacent fronts. The 1-1/4 inch projection provides working space between hand and door edge, which is useful on full-overlay installations and on deeper drawer boxes that benefit from a firm, straight pull.
The SZBAR-TKNOB-SN satin nickel knob uses a steel body, giving each pull a solid feel that helps installers and users sense when a door is fully opened or closed. The defined 1.5625 inch length and 1/2 inch width make layout predictable, so installers can space knobs consistently across multiple fronts without overpowering the cabinet faces. Its 1-1/4 inch projection sets a repeatable stand-off from the surface, which simplifies jig-based drilling when matching height and reach across a run of cabinets. The satin nickel finish offers a stable, uniform appearance that allows installers to coordinate this knob with other satin nickel hardware on the same project. Using the 8-32 x 1 inch screw size ties directly into standard cabinet knob threading, supporting quick installation with common drilling patterns and reducing the need to adjust bit sizes between different hardware points.
The Pro Value Series steel knob has a length of 1.5625 inches, a width of 1/2 inch, and a projection of 1-1/4 inches, giving a compact bar shape with practical finger clearance.
The SZBAR-TKNOB-SN knob is made from steel, providing a solid metal body that supports a firm feel when operating cabinet doors and drawers.
The satin nickel finish creates a subdued metallic look that pairs well with many satin nickel hinges and pulls, helping cabinets share a consistent hardware appearance.
This steel bar T-knob is designed to use an 8-32 x 1 inch screw, matching a common cabinet hardware thread for straightforward installation.
The Bar Pull collection knob has a projection of 1-1/4 inches, setting the gripping surface away from the cabinet face for better hand clearance and reduced surface contact.
The Bar Pull collection knob provides a straight bar profile in satin nickel, supporting modern cabinet layouts where linear hardware and consistent finishes are preferred.
The Pro Value Series steel knob brings a linear Bar Pull collection profile, a 1.5625 inch bar length, and a 1-1/4 inch projection that suits many cabinet and drawer fronts. Its satin nickel finish aligns with common hinge and pull finishes, supporting unified project visuals. With a 1/2 inch width and steel construction, the knob offers a compact yet solid grip that works well on small and standard fronts. Using an 8-32 x 1 inch screw size, it ties into established cabinet hardware threading so installers can keep drilling and mounting consistent across their work.
Sold In: 1 Each