Formica IdealEdge 3526-34 Travertine Scovato Finish Double Radius Edge Molding, 1-1/2" H x 144" L

Formica IdealEdge 3526-34 Edge Molding Use

Formica IdealEdge 3526-34 edge molding gives countertops, islands, desks and work stations a finished look on all sides, so laminated surfaces read as a continuous, intentional surface rather than a raw panel edge. The 1-1/2 inch height works with common top build-ups, which helps match the edge profile to standard laminated substrate constructions. A 144 inch length lets installers run long, straight sections or generous curves with fewer joints, which reduces layout time and potential seam alignment issues. The double radius profile softens both exposed corners, so high-contact edges feel smooth in everyday use. The Travertine Scovato finish ties into matching Formica laminate designs, helping create a coordinated surface-and-edge appearance. As a laminate edge molding from Formica Corporation, this piece fits into laminate-based projects where visual continuity between the top and the edge matters.

Key Edge Molding Details For Real Jobs

• The 1-1/2 inch height handles typical laminated build-ups, so installers can cover substrate edges in one pass instead of stacking trim pieces.
• The 144 inch length supports long runs on countertops, islands and work stations, reducing splices and the time needed to align multiple short sections.
• The double radius design eases both exposed corners, which cuts down on sharp-feeling edges along desks, counters and frequent-touch work areas.
• The Travertine Scovato finish coordinates with corresponding Formica surfaces, allowing the edge to visually blend with the main laminate field.
• The laminate edge molding construction from Formica Corporation positions this part for use wherever a decorative laminate edge is preferred over exposed core material.

Installation And Bonding Details That Matter

This IdealEdge double radius edge molding is specified for use on straight, curved, clipped and 90 degree edges, so the same part can carry through complex plan layouts without switching profiles mid-run. The MDF core provides a consistent bonding surface along the full 144 inch length, which supports even glue lines when working with laminate-compatible adhesives. A moisture barrier is built into the design, helping the edge resist everyday moisture exposure at sinks, work stations or busy countertop zones. Recommended glue for this molding is the AFF522 series, sold separately, which gives installers a named adhesive option for laminating the edge to the substrate. The 12 foot length is suited to standard counter and island spans, limiting on-site cutting to fit-to-length and end clean-up.

Using This Laminate Edge Molding In Projects

Where This IdealEdge Molding Fits Best

This Formica IdealEdge 3526-34 edge molding is intended for countertops, islands, desks and work stations, so it naturally fits into kitchen, office and shop layouts that rely on laminate surfaces. The ability to work on straight, curved, clipped and 90 degree edges lets fabricators carry the Travertine Scovato finish around inside corners, gentle radius ends and clipped corners using the same profile. The double radius shape helps define the outside lines of islands and desks where both top and bottom edges remain visible, keeping the design language consistent around exposed overhangs. At 1-1/2 inches high, the molding suits projects using typical laminated build-ups, allowing the edge to cover substrate layers without needing a separate trim strip. The MDF core supports machining or cutting to project length as needed while keeping the decorative laminate face ready for finishing passes.

Details Supporting Consistent Edge Results

The MDF core of this IdealEdge molding gives a uniform, stable base for the laminate face, which supports consistent adhesion when used with the recommended AFF522 series glue. The moisture barrier feature contributes to edge performance in typical countertop and work station environments where periodic spills or cleaning contact the edge profile. The 144 inch single-piece length reduces the number of seams along a run, which simplifies alignment of the Travertine Scovato pattern across adjoining surfaces. The double radius design on the profile provides the same eased contour on both exposed edges, supporting repeatable routing and finishing passes along the entire run. Because this part is a laminate edge molding from Formica Corporation, it integrates into jobs where matching laminate sheet and edge components are specified for a unified finish from top surface through the edge detail.

Common Questions About This IdealEdge Trim

Select This Edge For Coordinated Laminate Runs

This Formica IdealEdge 3526-34 Travertine Scovato double radius molding ties directly into laminate-based countertops, islands, desks and work stations, aligning the edge with the surface design. The 1-1/2 inch height, MDF core and moisture barrier support practical installation and everyday use on real jobs. The 144 inch length and suitability for straight, curved, clipped and 90 degree edges give flexibility to carry one profile through full layouts. When a project calls for laminate edge molding from Formica Corporation that visually coordinates with Travertine Scovato tops, this part provides a defined, repeatable solution.