Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Formica IdealEdge Flint Crystal is a laminate edge molding that gives a finished look on all sides, so countertops and work surfaces present a continuous surface rather than an exposed substrate edge. This molding has a 1-1/2 inch profile, which provides substantial vertical coverage at the edge and helps visually tie into standard countertop build-ups. The product is supplied in a 12 foot length, allowing long runs on countertops, islands, desks, and work stations without frequent joints along the edge. An Etchings finish is incorporated into the Flint Crystal design, so the edge appearance coordinates with Etchings-style laminate surfaces in the same pattern family. A moisture barrier is built into the construction, which helps the MDF core resist everyday humidity at the edge interface where spills and cleaning can concentrate. The MDF core gives a workable substrate for typical laminate fabrication equipment, supporting clean machining and bonding.
This laminate edge molding is suitable for straight, curved, clipped, and 90 degree edges, so one profile can follow most countertop layouts without changing edge parts between runs. The Double Radius waterfall style is intended for use on countertops, islands, desks, and work stations, which aligns the profile geometry with typical front and end edges in these applications. The MDF core provides a stable base for shaping and adhesive bonding during edge fabrication, so installers can machine the profile using standard tooling for laminate edge moldings. Recommended glue is the AFF522 series, sold separately, which allows fabricators to select an adhesive matched to the manufacturer guidance for this IdealEdge product. The 1-1/2 inch height and 12 foot length work together to cover common edge builds in a single strip in many shop layouts.
This Formica Corporation IdealEdge laminate edge molding is designed for use on countertops, islands, desks, and work stations, so it fits directly into residential or commercial work-surface runs that require a laminate waterfall front. Because it is suitable for straight, curved, clipped, and 90 degree edges, the same Flint Crystal profile can follow an island perimeter, wrap clipped corners on a desk, or finish inside corners on a work station without switching edge types. The Double Radius style creates a waterfall effect along both exposed sides of the molding, so front edges, returns, and exposed ends share the same rounded geometry. With a 1-1/2 inch profile height, the edge molding can address standard laminated build-ups along many tops, giving visual continuity between the horizontal surface and the rounded edge band. The Etchings finish pattern in Flint Crystal supports coordinated design where the laminate surface uses the same finish family, so the eye reads one consistent material across the top and edge.
The 12 foot length of this edge molding supports long, uninterrupted runs along countertops and islands, which limits the number of field joints at the front edge and reduces layout complexity on multi-station tops. A moisture barrier works with the MDF core to help protect the edge construction from everyday contact with water and cleaning at the front edge, supporting long-term adhesion when installed with the recommended AFF522 series glue. The MDF core also machines predictably with standard fabrication tools used for laminate edge moldings, so installers can trim and fit the profile to match straight sections, curves, and 90 degree corners in a single workflow. Being suitable for straight, curved, clipped, and 90 degree edges means the same 1-1/2 inch Flint Crystal strip can transition from a long straight run into a clipped corner or inside return, which simplifies pattern planning and reduces scrap. The Double Radius waterfall shape standardizes the rounded edge detail, supporting repeatable appearance from job to job.
The Formica IdealEdge Flint Crystal piece is a laminate edge molding designed to give a finished look on all sides of countertops, islands, desks, and work stations.
The edge molding has a 1-1/2 inch profile height and a 12 foot length, which suits many standard countertop and work-surface edge applications.
This laminate edge molding is for use on countertops, islands, desks, and work stations, so it fits typical horizontal work surfaces in residential and commercial projects.
The IdealEdge Flint Crystal profile is suitable for straight, curved, clipped, and 90 degree edges, allowing a single style to handle varied edge layouts.
This Formica edge uses a Double Radius waterfall style with an Etchings finish in the Flint Crystal design, coordinating with Etchings-finish laminate surfaces.
The molding uses an MDF core with a moisture barrier, and the recommended glue is the AFF522 series, sold separately, for bonding during fabrication.
This Formica IdealEdge 3518-46 Flint Crystal Etchings Finish Waterfall Edge Molding combines a 1-1/2 inch Double Radius profile, MDF core, and moisture barrier in a 12 foot length, so it is ready to support continuous edges on countertops, islands, desks, and work stations. The suitability for straight, curved, clipped, and 90 degree edges means one Flint Crystal Etchings profile can carry through the entire run, simplifying fabrication on multi-surface layouts. For projects that call for a coordinated Etchings finish and a finished look on all sides, this laminate edge molding provides a defined Flint Crystal solution that aligns with Formica Corporation design and adhesive guidance.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  AFF522-1G Mfr# F-522-01 | F522 IdealEdge Fastset Wood Glue, White, 1 Gallon Jug |