
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
20V MAX Li-Ion compact 2-tool combo gives installers and woodworkers a DeWalt compact drill/driver and a compact 1/4 inch impact driver in one kit, so a single setup handles drilling, fastening, and assembly tasks around the shop or jobsite. The DCD708 compact drill/driver uses a high performance motor delivering 340 unit watts out of power, which drives typical woodworking bits and fasteners efficiently during cabinet, furniture, and fixture work. Its two speed transmission, rated at 0-450 and 0-1650 RPM, lets the operator match speed to material or screw size, supporting controlled drilling in wood at low speed and faster hole-making at the higher range. A 1/2 inch single sleeve ratcheting chuck provides tight bit gripping strength, so bits stay seated under load and repetitive starts, reducing slippage while boring or driving into hardwood or sheet goods.
The DCD708 20V MAX lithium ion compact drill/driver uses a two speed transmission at 0-450 and 0-1650 RPM, allowing a worker to stay in the lower range for controlled pilot holes and switch to the higher range when speed on repetitive drilling is the priority. Its 1/2 inch single sleeve ratcheting chuck grips bits tightly, which keeps twist bits, drivers, and specialty bits from backing out under torque, maintaining consistent hole size and drive depth. The ergonomic handle supports deliberate control at either speed, so countersinks and finish work can be completed with a steady hand. The DCF809 brushless cordless compact impact driver uses its compact length of 5.1 inches and 2.1 lb weight to position the tool in tight corners, while the 3 LED light ring keeps the screw head and surrounding material visible during driving.
The 20 V Max lithium-ion brushless cordless drill/impact combo kit, identified as DeWalt DCK278C2, is suited to woodworking and related tasks where a compact drill/driver and a compact impact driver are both useful. The DCD708 compact drill/driver, with its 340 unit watts out motor, serves general drilling and screw-driving in wood components, fixtures, and shop projects where a 1/2 inch chuck accepts a range of bit shanks. Its compact, lightweight form helps when assembling cabinetry or built-ins where work happens inside carcasses or under counters. The DCF809 brushless cordless compact impact driver, with its short 5.1 inch front-to-back dimension and 2.1 lb weight, fits jobs that require driving screws or other suitable fasteners in confined framing bays, toe-kick areas, and other restricted spaces. The 3 LED light ring keeps these locations visible so work can continue even when ambient lighting is limited.
The two speed transmission on the DCD708, rated at 0-450 and 0-1650 RPM, supports repeatable setups because users can return to the same speed range for similar materials or screw sizes, maintaining predictable drilling times and hole quality. Its 1/2 inch single sleeve ratcheting chuck secures bits firmly, which stabilizes bit retention during batch operations like line boring or repetitive pilot drilling, preserving alignment from piece to piece. The ergonomic handle improves tool control, helping operators keep the drill square to the work for straighter holes and more consistent fastener seating. On the DCF809, the compact 5.1 inch length lets the driver approach fasteners closer to corners or obstacles, which aids straight-in driving rather than angled approaches that can damage material. The 3 LED light ring, designed to provide visibility without shadows, illuminates the drive point so fasteners start cleanly in pre-drilled holes or marked positions, supporting consistent alignment on hardware layouts and repetitive cabinet installations.
The combo kit has a DCD708 20V MAX lithium ion compact drill/driver and a DCF809 20V MAX lithium ion 1/4 inch impact driver, covering both drilling and impact driving tasks.
The DCD708 compact drill/driver uses a two speed transmission at 0-450 and 0-1650 RPM, so operators select a lower speed for control or a higher speed for faster drilling.
The DCD708 drill/driver delivers 340 unit watts out of power, giving it the ability to complete a wide range of applications in typical woodworking and installation work.
The 1/2 inch single sleeve ratcheting chuck provides tight bit gripping strength, helping bits stay secure during demanding drilling and driving operations.
The DCF809 brushless cordless compact impact driver is 5.1 inches front to back and weighs 2.1 lb, which supports work in tight or overhead locations.
The DCF809 impact driver uses a 3 LED light ring to provide visibility without shadows, improving screw placement and alignment in dim work areas.
The DeWalt 20 V Max lithium-ion brushless cordless drill/impact combo kit DCK278C2 brings together a DCD708 compact drill/driver and a DCF809 compact 1/4 inch impact driver, so one kit supports drilling and impact driving in confined or standard work areas. With the drill/driver delivering 340 unit watts out through a two speed transmission and a 1/2 inch ratcheting chuck, and the impact driver offering a 5.1 inch compact body with a 3 LED light ring, this combination suits woodworking and installation tasks that demand flexibility. Select this combo when a compact, cordless drill and impact pair with shared 20V MAX lithium ion power is the practical match for shop or jobsite workflows.
Sold In: 1 Each