15/16X.018 EB, BERGEN ASH 600FT/RL, Surteco Usa Inc WT9375-18-30773UM

Doellken Woodtape Edge Banding For Bergen Ash Panels

Doellken Woodtape edge banding in the 15/16 x .018 Bergen Ash profile gives a defined edge treatment for casework and panels using this finish. The Bergen Ash design lets projects using this decor carry the same look across exposed panel edges, which keeps cabinet runs and furniture pieces visually consistent from face to edge.

This edge banding uses a PVC construction under the Bergen Ash surface, so the material works as a surfacing solution within the Edgebanding & Surfacing category. The .018 inch thickness provides a slim build, allowing the edge to present a close, finished look without adding a bulky profile where panels meet doors, tops, or adjoining parts.

Supplied in a 600 foot roll length, this Bergen Ash PVC edge banding supports longer production runs where the same finish repeats across multiple cabinets, closets, or fixtures, reducing changeovers when running this color through an edgebander or similar workflow.

Practical Bergen Ash Edge Banding Details That Matter

• The 15/16 inch width covers standard panel thicknesses using Bergen Ash, so the edge treatment can fully wrap the substrate surface and leave trimming operations working from consistent overhang.
• The .018 inch thickness keeps the Doellken Woodtape material relatively thin, which helps trimmed edges sit close to the panel face and support tight joints at doors, drawer fronts, and adjoining casework elements.
• The 600 foot roll length provides an extended run of Bergen Ash edge banding, supporting shop setups that process multiple parts in the same decor without frequent roll changes during production.
• PVC construction places this product in the Edgebanding, PVC class, so it coordinates with typical woodworking and cabinet shop methods that use PVC edgebanding alongside laminates and other surfacing materials.
• The Bergen Ash design and Doellken Woodtape branding tie this edge banding to a specific decor look, helping projects that specify this finish match panel faces and edges under the same visual identity.

Bergen Ash PVC Edge Banding Fit And Use

This 15/16 x .018 Bergen Ash PVC edge banding works as an Edge Banding product class, so it is intended for covering exposed panel edges on casework, fixtures, or furniture built around this decor. The 15/16 inch dimension gives enough width for standard panel constructions using Bergen Ash faces, which supports trimming after application to bring the edge flush.

The .018 inch thickness helps the applied strip stay low-profile, so once trimmed it meets the face material with a modest transition suited to many laminated or surfaced panels. As part of the Edgebanding & Surfacing category, this product fits within workflows that treat edging and faces as coordinated surfaces for a unified finished appearance.

Using Bergen Ash Edge Banding In Woodworking Projects

Where This Bergen Ash Edge Banding Is Applied

This Doellken Woodtape Bergen Ash PVC edge banding is applied to exposed panel edges where a Bergen Ash surface is desired on both faces and edges. In cabinet or furniture construction that specifies Bergen Ash, this 15/16 inch width lets fabricators run edges on sides, shelves, tops, and bottoms so the color and pattern continue around the perimeter. Because it is supplied as a 600 foot roll, it supports shops producing multiple Bergen Ash panels in sequence, letting parts for larger jobs draw from the same roll of edging for visual continuity.

Being classified under Edgebanding & Surfacing and Edgebanding, PVC, this product suits workflows where panels receive a Bergen Ash surfacing treatment and then have edges banded to match. The PVC base provides an edging medium compatible with typical edge banding machinery used in woodworking environments that handle PVC edgebanding and other surfacing materials in similar formats.

Why These Bergen Ash Details Support Consistent Results

The combination of a 15/16 inch width and .018 inch thickness on this Bergen Ash edge banding supports a repeatable trim profile along panel runs. The 15/16 inch dimension gives a bit of working room beyond many panel thicknesses, which allows trimming tools to cut back to a flush line on both faces while holding a consistent reveal of the Bergen Ash surface. The .018 inch thickness keeps the edge slim, so after trimming, the transition from face material to edge stays modest and aligned with the look expected from PVC edge treatments in similar thickness ranges.

The Bergen Ash designation in both the SAP description and web description signals that this edge banding is tuned to that specific decor, giving specifiers a clear reference when matching edging to Bergen Ash-faced components. The manufacturer part number 30773M-1518-1 and Surteco Usa Inc WT9375-18-30773UM reference in the web description help link this Doellken Woodtape material to a defined finish code, which supports repeat orders for the same project line or for future jobs that must visually align with existing Bergen Ash installations.

Bergen Ash Edge Banding Questions From Installers

Select Bergen Ash Edge Banding For Matching Surfaces

The 15/16 x .018 Bergen Ash Doellken Woodtape edge banding from Wurth Baer Supply gives a PVC edging option tailored to this specific decor. The 600 foot roll length, defined Bergen Ash design, and Edge Banding classification support shops that want consistent, repeatable edges on Bergen Ash casework and furniture projects. Choosing this product aligns the panel edges with the same Bergen Ash finish identified by the SAP and web descriptions.