Amerock Separa 160mm Pull For Cabinet Projects

Amerock Separa 160mm pull is an aluminum handle designed for cabinet and furniture applications where a 6-5/16 inch center-to-center layout is already established. The 6-5/16 inch (160 mm) center-to-center drilling works with common cabinet boring patterns, so existing holes on many installations can be reused without changing layouts. The pull length of 8-13/16 inches provides a longer gripping area along the door or drawer front, helping hands get a solid hold on wider fronts. A projection of 1-3/16 inches stands the pull off the surface enough to clear fingers during operation, supporting smooth opening and closing. The 1/2 inch width keeps the profile visually lean while still giving a defined edge to grab. The black brushed nickel finish presents a darker metallic look that coordinates with other black brushed nickel components on the project.

Key Separa Pull Details For Daily Use

• The aluminum material keeps the Amerock Corporation Separa pull light, which eases handling during layout while still giving a solid, rigid feel once mounted on cabinet or furniture fronts.
• The 6-5/16 inch (160 mm) center-to-center dimension lets the pull line up with a wide range of pre-drilled patterns, which helps streamline replacement work on doors and drawers already bored to this size.
• The overall 8-13/16 inch length stretches further across the face of the front, which gives users more space to grip anywhere along the handle when moving heavier or full drawers.
• The 1-3/16 inch projection holds the gripping surface off the face of the cabinet, which helps fingers clear raised panels or edge profiles during operation.
• The 1/2 inch width presents a slim front edge, which keeps the hardware visually clean while still offering a defined surface line for repeatable gripping points.
• The black brushed nickel finish on this Separa pull coordinates with black brushed nickel decorative hardware, which supports consistent appearance across multiple doors and drawers in the same run.

Mounting The Separa Pull On Cabinet Fronts

The Amerock Separa aluminum pull is built around a 6-5/16 inch (160 mm) center-to-center dimension, which sets the hole spacing for mounting on doors or drawers. That fixed spacing allows the pull to drop into existing 160 mm drill patterns, reducing layout work when swapping hardware on cabinets already bored to this size. The listed overall length of 8-13/16 inches helps with positioning the handle proportionally on wider fronts, so the grip covers more of the working width. A projection of 1-3/16 inches defines how far the handle stands off the surface, leaving room for fingers to pull straight without rubbing the door or drawer face. The 1/2 inch width controls how much of the handle shows on the front, guiding both appearance and the feel of the edge in daily use.

Using This Amerock Pull In Cabinet Runs

Where The Separa Aluminum Pull Fits Best

The Amerock Corporation Separa pull fits cabinet and furniture fronts that are drilled for a 6-5/16 inch (160 mm) center-to-center pattern, so it suits both new layouts and projects that already rely on that spacing. The 8-13/16 inch overall length positions this pull as a good match for medium to wider doors and drawers, where a longer handle visually balances the front and provides more gripping area. With a projection of 1-3/16 inches, the handle stands far enough off the surface for users to wrap fingers behind the bar even when fronts have decorative edge details. The 1/2 inch width keeps the handle looking streamlined across a run of cabinets, which matters when several Separa pulls are installed side by side. The black brushed nickel finish delivers a dark metallic tone that works alongside other black brushed nickel decorative hardware components in the same space.

Details That Support Consistent Cabinet Results

The defined 6-5/16 inch (160 mm) center-to-center measurement on the Separa pull anchors drilling layouts, which helps installers keep handle heights and spacing consistent from door to door. The 8-13/16 inch overall length gives a repeatable reference dimension when aligning multiple pulls across a bank of drawers, supporting straight visual lines in longer runs. A 1-3/16 inch projection standardizes the stand-off distance from the face, so users experience the same finger clearance on every opening point fitted with this model. The 1/2 inch width keeps each pull visually similar in proportion, helping cabinet faces present a uniform hardware line. The aluminum material contributes to an easier handling weight during installation while still giving a solid, continuous bar once fastened. The black brushed nickel finish ties these technical dimensions together with a unified appearance across the installation.

Common Amerock Separa 160mm Pull Questions

Selecting The Right Separa Pull For Your Job

The Amerock Separa BP36735BBN pull combines a 6-5/16 inch (160 mm) center-to-center layout, 8-13/16 inch overall length, and 1-3/16 inch projection to support consistent cabinet and furniture installations. The 1/2 inch width and black brushed nickel finish help align appearance across doors and drawers in a run. When a project calls for aluminum hardware in this specific drilling size, this Separa pull offers defined dimensions that match layout, boring, and visual planning on the job.