
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Panel catch for VT-DF shelving anchors the wall panel that supports a slotted shelving system, so the rest of the VT-DF wall shelving system can do its job with a stable base. The component works within a slotted shelving system for flexible layout, allowing panels and shelf positions to follow design and storage needs over time. Level adjustable shelving supported by this catch lets shelves be installed anywhere in the slot, which helps installers respond to changing contents without rebuilding the wall. The VT-DF-C20 panel catch works with a wall panel size of 20 mm thickness, which ties the hardware directly to a common panel thickness for predictable milling. It supports wall panel widths up to 1820 mm, helping longer runs of shelving work off a single panel. It also fits panel heights between 105 mm and 450 mm, which gives designers room to size panels to the project while staying inside the hardware range.
The slotted shelving system for flexible layout built around VT-DF-C20 panel catch hardware lets installers position each shelf anywhere in the slot, which supports precise alignment with nearby cabinets or uprights. Level adjustable shelving delivers small on-site corrections during installation, so minor irregularities in wall surfaces have less impact on how straight the finished shelving run appears. Working with a 20 mm wall panel thickness keeps routing and drilling operations consistent, since every panel prepared at that thickness will match the VT-DF specification. A maximum panel width of 1820 mm gives room for broad storage sections or display walls, while the 105 mm to 450 mm panel height range fits short or tall panel designs under the same hardware family.
The VT-DF-C20 panel catch is specified for VT-DF shelving, so it sits at the core of a Sugatsune America wall shelving system that uses a slotted shelving layout. In a wall shelving system application, the 20 mm thick wall panel acts as the structural plane where the catch engages, which means carpenters and casework shops can build panels in the shop and then mount them on site with predictable fit. The ability to handle wall panel widths up to 1820 mm supports wide closet runs, garage organization walls, or similar large panel installations within the stated size. Panel height flexibility from 105 mm to 450 mm lets the same VT-DF-C20 hardware participate in low accent panels or taller backing panels, so installers can keep hardware common across multiple segments of a project.
Because the system is defined as slotted shelving for flexible layout, the VT-DF-C20 panel catch becomes a repeatable reference point that holds the panel while shelves are installed anywhere in the slot, leading to consistent spacing patterns across many bays. Level adjustable shelving capability lets installers shift shelf positions within the slot until product lines, closet rods, or storage bins align visually, which cuts down on rework from misaligned rows. The 20 mm wall panel thickness spec means every panel machined to that dimension will interact with the catch consistently, reducing variability from job to job. With a maximum wall panel width of 1820 mm, the same layout rules can be applied along a wide run without changing hardware, which simplifies drawings and cutting lists. The approved panel height range between 105 mm and 450 mm gives a bounded design window, so once layouts are drawn within that range the VT-DF-C20 catch and the rest of the VT-DF shelving system can be applied again on future projects using the same dimensions.
The VT-DF-C20 panel catch is for VT-DF shelving, so it ties directly into that specific wall shelving system and its slotted layout approach.
The slotted shelving system for flexible layout allows shelves to be installed anywhere in the slot, giving installers freedom to set heights for each project.
The VT-DF-C20 panel catch is designed for a wall panel size with 20 mm thickness, which guides panel material selection and machining.
The slotted shelving system using this catch supports a wall panel maximum width of 1820 mm, which helps when planning wide shelving runs.
The VT-DF-C20 panel catch works with wall panel heights between 105 mm and 450 mm, giving flexibility for shallow or taller panel designs.
Level adjustable shelving allows shelves to be fine-tuned within the slot, which helps achieve clean, even lines across the wall shelving system.
The VT-DF-C20 panel catch for VT-DF shelving ties directly into a slotted shelving system for flexible layout, so one hardware choice supports many storage designs. With level adjustable shelving and shelves that can be installed anywhere in the slot, installers gain field flexibility without re-engineering the wall. Defined wall panel requirements of 20 mm thickness, maximum 1820 mm width, and 105 mm to 450 mm height provide clear boundaries for panel fabrication that match the Sugatsune America wall shelving system. For projects built around the VT-DF slotted shelving concept, this panel catch helps connect design intent to a repeatable on-site installation.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | SLVT/DF/A1820 Mfr# VT-DF-A1820 | Level Adjustable Shelving Slotted Panel Bracket, Anodized | ||||
Sold in: 1 Each | SLVT/DF/E1820 Mfr# VT-DF-E1820 | Level Adjustable Shelving Top/Bottom Bracket, Anodized | ||||
Sold in: 1 Each | SLVT/DS/X/450 Mfr# VT-DS-X-450 | VT-DS Level-Adjustable Shelving System 3) Shelf Bracket For Wood - Sugatsune America VT-DS-X-450 | ||||
Sold in: 1 Each | SLVT/DS/X/800 Mfr# VT-DS-X-800 | 800mm Level Adjustable Shelving Shelf Bracket for Wood, Anodized/Gray | ||||
Sold in: 1 Each | SLVT/DS/G/450 Mfr# VT-DS-G-450 | 450mm Level Adjustable Shelving Shelf Bracket for Glass, Anodized/Gray | ||||
Sold in: 1 Each | SLVT/DS/G/685 Mfr# VT-DS-G-685 | 685mm Level Adjustable Shelving Shelf Bracket for Glass, Anodized/Gray |