VT-DS Level-Adjustable Shelving System 2) Top/Bottom Bracket - Sugatsune America VT-DS-E1820

VT-DS Level-Adjustable Shelving System Bracket Use

VT-DS level-adjustable shelving system describes the Sugatsune America VT-DS-E1820 top and bottom bracket that supports the VT-DS wall shelving system, so installers get a defined component for building level-adjustable shelves. The product is identified as a slotted shelving system for flexible layout, so you can position shelving components along the slots to match changing storage needs. Because shelves can be installed anywhere in the slot, you gain freedom to locate shelf levels without being locked to fixed hole spacing. The system is described as level adjustable, which means you can fine-tune shelf positions for straight, aligned runs. The description notes simple and easy installation, which helps streamline wall shelving projects where repeatable installs save time. Use with desired panel to match the surrounding design ties this bracket directly to wall panel selection, so you can coordinate shelving structure with room finishes while still relying on a defined hardware system.

Bracket Features That Support Flexible Layouts

• The product is a slotted shelving system for flexible layout, which lets you plan shelf spacing around stored items rather than around preset holes, helping fit irregular loads in closets or garages.
• Shelves can be installed anywhere in the slot, giving you continuous vertical adjustment so you can raise or lower shelves later without rebuilding the wall panel or support structure.
• The system is level adjustable, which supports straight, even shelf runs across multiple brackets, helping reduce shimming and rework when aligning long wall shelving sections.
• Simple and easy installation is called out, which helps keep labor predictable when repeating the VT-DS wall shelving system across multiple rooms or commercial storage runs.
• Using the bracket with a desired panel to match the surrounding design allows you to select wall panels that blend with cabinetry or wall finishes while still using the same support hardware.

Wall Panel Size And Panel-Based Installation Details

The VT-DS-E1820 bracket uses a wall panel sized for the system, with panel thickness specified as 20 mm (13/16 inch), so fabricators can machine or source panels that match this dimension. The maximum wall panel width of 1820 mm (71-5/8 inch) defines the horizontal span supported by one panel, helping lay out bay widths in closets or storage walls. Panel height can range from 105 mm to 450 mm (4-1/8 inch to 17-3/4 inch), which gives flexibility to design tall or low bands of slotted support depending on how much vertical adjustability you want in a given area. Because the bracket is part of a wall shelving system, these panel dimensions guide your cutting list, so panel production aligns with the hardware geometry.

Using This VT-DS-E1820 Bracket In Shelving Runs

Where The VT-DS Wall Shelving System Fits

The VT-DS-E1820 bracket is specified for a wall shelving system, which positions it for shelf, closet, and garage organization tasks where panels mount to the wall and support adjustable shelves. The description notes use with desired panel to match the surrounding design, so the same structural system can be used behind painted, laminated, or veneered panels that visually tie into cabinetry or wall surfaces. Because the system is a slotted shelving system for flexible layout, it suits projects where storage requirements may change, such as residential closets or workshop walls. Shelves can be installed anywhere in the slot, so you can create tightly spaced shelves for small items or wider gaps for bulky storage within the same vertical run. Panel height between 105 mm and 450 mm allows low bands of slots for base-level shelving or taller bands for mid-wall storage, so layouts can be tailored to the room plan.

Details That Help Maintain Level, Adjustable Shelves

The VT-DS level-adjustable shelving system designation highlights that this bracket supports level adjustable shelves, which helps maintain consistent lines across multiple brackets when aligning long spans. The specified wall panel thickness of 20 mm (13/16 inch) sets a clear machining target, so grooves, dados, or mounting details can stay consistent from panel to panel, aiding repeatability. The maximum panel width of 1820 mm (71-5/8 inch) defines how wide each slotted section can be, helping limit deflection in long runs by breaking walls into controlled segments. Panel height from 105 mm to 450 mm gives enough space to distribute several slots vertically, supporting precise shelf spacing. The web description notes that a shelf bracket for wood or glass is available and that shelf board is not part of this component, which clarifies that this top and bottom bracket focuses on supporting the slotted panel while separate shelf supports handle direct contact with wood or glass shelves.

Common Questions About VT-DS-E1820 Bracket Use

Select The VT-DS Bracket For Panel-Based Shelving

The VT-DS-E1820 top and bottom bracket is defined for the VT-DS level-adjustable wall shelving system, giving you a named component to anchor slotted panels for adjustable shelves. With a wall panel thickness of 20 mm (13/16 inch) and a maximum width of 1820 mm, the bracket supports clear panel sizing during fabrication. The panel height range of 105 mm to 450 mm helps you design slot bands that match real storage zones. For projects where a slotted shelving system for flexible layout and level adjustable shelves are priorities, this Sugatsune America bracket offers a structured way to build panel-based shelving that aligns with surrounding design.