Berenson Contemporary Advantage Three Series 3-3/4" (96 mm) Center to Center Champagne Pull, - 7918-20CZ-P

Berenson Contemporary Advantage Three Pull For Cabinets

Berenson Contemporary Advantage Three pull gives cabinets a defined 3-3/4 inch center to center grip, so installers get a consistent layout across doors and drawers. The pull is part of the Advantage Series, which keeps styling uniform when the same line is used across a project. Its zinc die cast material creates a solid metal handle that holds up during regular cabinet use. The Champagne finish provides a specific light metallic tone that coordinates with matching finishes on other Berenson hardware. A 4-1/2 inch overall length covers small handling marks near old screw holes when replacing similar pulls. The 3/8 inch width provides a slim front profile while still giving enough surface for a secure hand grip. With a 1-1/8 inch projection, the pull keeps fingers clear of the cabinet face, which is useful on thicker door profiles and heavier fronts.

Key Details That Support Cabinet Workflows

• The 3-3/4 inch (96 mm) center to center dimension sets a standard drilling pattern, which simplifies repeat boring on multiple fronts and matches common cabinet hardware jigs for faster layout.
• The 4-1/2 inch length gives a bit of coverage beyond the screw spread, which helps visually balance wider drawer fronts and offers more grab area without crowding neighboring hardware.
• The 1-1/8 inch projection spaces the handle away from the face of the cabinet, which provides finger clearance and reduces contact wear on the finish of doors and drawers during use.
• The 3/8 inch width creates a narrow visual line on the cabinet face, which works well on contemporary designs while still giving enough edge for a comfortable pull.
• The zinc die cast construction forms a rigid metal body, which supports everyday opening and closing loads on typical residential or light commercial cabinetry.
• The Champagne finish delivers a consistent light metallic color, which helps tie together multiple cabinets in a run where the same finish is specified throughout the job.

Mounting And Layout Details For This Pull

The 3-3/4 inch (96 mm) center to center drilling dimension on this pull sets the hole spacing the installer uses for both doors and drawers. That spacing aligns with many cabinet boring patterns, which keeps layout repeatable on production runs. A 4-1/2 inch overall length leaves some metal beyond each hole, which helps center the pull visually on narrow drawer fronts and small doors. The 1-1/8 inch projection defines how far the pull stands off the face, which supports comfortable gripping on doors with applied moldings. With a 3/8 inch width, the handle stays slim enough to clear adjacent fronts in tight reveals while still reading as a continuous line on wider panels.

Using The Champagne Pull In Cabinet Projects

Where This Berenson Advantage Pull Fits Best

The Berenson Contemporary Advantage Three pull fits cabinet work that calls for a 3-3/4 inch (96 mm) center to center drilling pattern, so it works naturally on layouts already built around that spacing. The 4-1/2 inch length suits standard kitchen and bath cabinet doors, giving enough hand room without running into neighboring pulls on smaller fronts. A 1-1/8 inch projection works well on face frame and frameless cabinets alike, creating clearance over door edges and typical overlay conditions. The 3/8 inch width and Champagne finish support contemporary or transitional designs where a slim, light-colored pull is specified across multiple rooms or casework runs. Zinc die cast material keeps the handle appropriate for typical residential and light commercial cabinet duty.

Details That Support Consistent Results On Installs

The 3-3/4 inch (96 mm) center to center dimension on this Advantage Series pull ties directly into standard cabinet drilling jigs, which helps installers maintain uniform spacing from front to front. A 4-1/2 inch overall length gives some tolerance when aligning on existing fronts with pre-bored 96 mm holes, helping cover slight variances in edge distances. The 1-1/8 inch projection defines stand-off from the door surface, limiting knuckle contact with the cabinet face when opening heavier doors. A 3/8 inch width provides a narrow bar that still offers enough bearing surface against the hand, which is useful on frequently used doors such as base cabinets. The Champagne finish keeps the appearance consistent when multiple pulls of the same model number 7918-20CZ-P are used throughout a project.

Common Questions About This Berenson 7918-20CZ-P Pull

Choose This Pull For 96 Mm Cabinet Layouts

The Berenson Contemporary Advantage Three pull in Champagne gives a 3-3/4 inch (96 mm) center to center layout with a 4-1/2 inch length, 1-1/8 inch projection, and 3/8 inch width. On cabinet jobs using this drilling pattern, selecting Berenson part 7918-20CZ-P provides a matching zinc die cast handle that visually ties doors and drawers together.