Berenson Edge Pull Series 1" (25 mm) Center to Center Polished Chrome Tab Pull, - 9001-4026-P

Berenson Edge Pull 1 Inch Center For Cabinets

Berenson edge pull 1 inch center gives cabinets a low-profile gripping point by using a compact tab design that mounts at the door or drawer edge. The pull is part of the Advantage Two Series, so it follows a consistent contemporary style across that collection for visually coordinated jobs. Its aluminum construction provides a solid metal body that keeps weight low for small fronts and tight spaces. The polished chrome finish reflects surrounding surfaces, which helps this pull visually match other chrome hardware in the same room. A 1 inch center to center dimension keeps drilling simple when laying out narrow doors or thin drawer rails. The 1-25/32 inch overall length creates a short tab that sits close to the edge, useful where fronts are compact or grouped closely. Projection of 1-21/32 inch gives fingers clearance while still staying near the face for a clean line.

Key Advantage Two Edge Pull Job Details

• The Advantage Two Series designation ties this pull to a broader Berenson line, so multiple openings can share the same modern look across a project without mixing styles.
• Aluminum material forms the body of the tab pull, which keeps each piece light when used on small doors and helps reduce overall hardware weight on multi-opening cabinet runs.
• The polished chrome finish creates a bright, reflective surface, letting the pull coordinate with polished chrome hinges or faucets so visible metal parts read as a unified set.
• Center to center dimension of 1 inch defines the mounting hole spacing, which helps during layout when drilling repetitive patterns across small fronts or narrow face frames.
• Base diameter of 3/4 inch defines the footprint at the mounting point, which helps the pull sit neatly at the edge without covering too much of the door or drawer face.

Edge Pull Fit, Spacing, And Mounting Details

The 25 mm center to center drilling on this tab pull sets the mounting points close together, which suits compact doors or narrow rails where standard longer pulls will not fit. With an overall length of 1-25/32 inch, the pull stays short, giving room for multiple pulls on small drawer stacks without conflict. Width of 3/4 inch defines how far the tab runs along the edge, useful when aligning it with door thickness or overlay reveals. Projection of 1-21/32 inch means the gripping area stands off the surface enough for fingers to hook behind, supporting regular opening forces. The designated screw size of 8-32 x 1 inch sets the thread and length pairing for the mounting connection into the cabinet front, which simplifies bit selection and drilling depth during installation.

Using This Polished Chrome Tab Pull On Projects

Where This Polished Chrome Edge Pull Works

This Berenson Corporation pull falls under decorative hardware and moldings, handles and pulls, so it is suited to cabinet doors and drawers where a small edge-mounted grip is preferred. Being identified as a tab pull signals that it presents a thin profile at the front, which is useful when a minimal look is desired along cabinet lines. The polished chrome finish gives it a modern appearance that coordinates with other polished chrome elements on casework or nearby fixtures. The compact 1 inch center to center measurement lets the pull sit near corners or on narrow drawer fronts without crowding adjacent lines. A 3/4 inch width provides enough surface at the edge for a comfortable pinch while still keeping visual bulk low. Its short 1-25/32 inch length helps when multiple pulls must fit across a bank of small fronts.

Dimensions That Support Repeatable Installation Results

The 1 inch center to center spacing aligns with straightforward drilling jigs, which aids repeatable placement across several doors using consistent measurements. Projection of 1-21/32 inch sets a dependable stand-off from the cabinet face, so installers can expect similar finger clearance across every opening that uses this model. With a base diameter stated as 3/4 inch, the footprint is defined clearly, which helps with edge placement relative to door thickness and reveals. The 3/4 inch width also offers a predictable stripe of metal along the edge, supporting consistent visual lines when several pulls line up across a run. The specified 8-32 x 1 inch screw size gives a clear fastener standard, which streamlines tool setup and hardware selection for repeated mounting during production-style work.

Common Questions About The Berenson 9001-4026-P

Select This Edge Pull For Focused Chrome Projects

This Berenson Edge Pull Series 1 inch center to center polished chrome tab pull combines Advantage Two Series styling with compact aluminum construction for cabinet doors and drawers. The defined 1 inch center to center, 1-25/32 inch length, and 1-21/32 inch projection give predictable layout and grip characteristics. The 3/4 inch width and base diameter create a controlled footprint at the edge, supporting clean lines on modern casework. For projects that call for polished chrome decorative hardware organized around consistent dimensions, this tab pull offers a clearly specified option ready to use on coordinated cabinet runs.