Berenson Contemporary Advantage Two Series 3-3/4" (96 mm) Center to Center Brushed Nickel Pull, - 9023-4BNL-P

Berenson Contemporary Advantage Two Pull For Cabinets

Berenson Contemporary Advantage Two pull gives cabinets a modern aluminum handle with brushed nickel look, so projects get contemporary styling with a consistent metallic appearance. The 3-3/4 inch (96 mm) center to center dimension sets precise handle spacing, which simplifies drilling layouts across doors and drawers. Overall length of 6-5/16 inch creates a longer gripping area, helpful on wider fronts where a compact knob would feel tight. A projection of 1-1/16 inch stands the pull off the surface, giving fingers room to grab without scraping finished faces. The 1/4 inch width keeps the profile slim, which suits clean-lined kitchens and casework. A base diameter of 1-1/2 inch spreads contact at each mounting point, which supports a solid feel when operating heavier fronts. This pull is part of the Advantage Series, giving shops a repeatable style for multi-room or multi-unit work.

Key Cabinet Pull Details That Support Jobs

• The aluminum material keeps the pull light, which is useful on large cabinet doors where hardware weight adds up across many fronts.
• The brushed nickel look finish provides a muted metallic surface, helping it blend with similar brushed fixtures throughout a room.
• The 3-25/32 inch center to center dimension matches 96 mm spacing, giving installers a clear drilling reference across metric and imperial layouts.
• The 6-5/16 inch overall length offers a generous hand grip area, which can improve daily operation on tall pantry doors and wide drawers.
• The 1-1/16 inch projection brings the handle forward, creating clearance for fingers while helping protect door and drawer faces from hand contact.
• The 1/4 inch width keeps the pull visually minimal, which supports streamlined cabinet designs without bulky hardware lines.
• The 1-1/2 inch base diameter at each end distributes load, which contributes to a stable feel when opening heavier or loaded cabinetry.

Mounting Dimensions For Cabinet Pull Alignment

The 3-3/4 inch (96 mm) center to center size defines hole spacing, so installers can set jigs and templates for repeat drilling across a run. With the 3-25/32 inch center to center listing matching this spacing, both metric and fractional references point to the same mounting layout. The 6-5/16 inch overall length helps with visual alignment on wider fronts, because the handle extends further across the panel. Projection of 1-1/16 inch affects how far the pull stands off the door, influencing hand clearance around adjacent walls or cabinets. The 1-1/2 inch base diameter at each contact point helps the pull sit flat against the surface, which supports clean alignment when tightening fasteners from the back.

Using This 9023-4BNL-P Pull In Cabinet Work

Where This Brushed Nickel Look Pull Fits Best

This 9023-4BNL-P cabinet pull fits decorative hardware and moldings projects where a handle and pull style is specified. The brushed nickel look finish works in jobs calling for brushed metallic tones on fronts, tying in with similar sink, faucet, or lighting finishes. As part of a handles and pulls category from Berenson, it suits cabinet doors and drawers across kitchens, baths, and built-ins that need a consistent hardware line. The 6-5/16 inch length visually balances medium to wide fronts, which can help maintain proportion on drawer banks. Aluminum construction adds a contemporary character, which aligns with the Contemporary Advantage Two series name and supports modern cabinet designs.

Details That Support Repeatable Cabinet Installations

The 96 mm center to center dimension on this Berenson aluminum cabinet handle pull is a standard spacing, which lets installers reuse drilling patterns across multiple projects. The 3-25/32 inch center to center specification also ties directly to that spacing in fractional terms, so both metric and imperial markings on jigs can be used accurately. Projection of 1-1/16 inch gives consistent standoff from the door, which helps align pulls across banks of cabinets with an even shadow line. The slim 1/4 inch width and 1-1/2 inch base diameter at each end create a defined footprint, aiding visual alignment with rail or stile edges. As a piece in the Advantage Series cabinet hardware, this pull supports repeat selections on future jobs that match finish, style, and dimensions already installed.

Common Questions About This Berenson Cabinet Pull

Select This Pull For Consistent Cabinet Hardware Layouts

This brushed nickel look Berenson Contemporary Advantage Two pull brings a 96 mm center to center layout, aluminum construction, and 6-5/16 inch overall length to cabinet projects that call for modern lines. The defined 1-1/16 inch projection and 1/4 inch width shape both clearance and appearance, while the 1-1/2 inch base diameter helps each mounting point sit cleanly on the surface. For cabinet runs that will repeat this hardware across multiple fronts, this 9023-4BNL-P handle gives a fixed set of dimensions to build drilling patterns and visual alignment around.