Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Berenson Transitional Advantage One pull is a cabinet handle from the Advantage Series that uses a 5-1/16 inch center to center drilling, so it matches layouts designed around a 128 mm spread. The pull is made from zinc, which gives a solid metal body that suits regular cabinet and drawer use. Its Verona Bronze finish provides a defined, darker tone that visually frames doors and fronts. The overall length of 7-25/32 inches gives finger clearance across wider drawer fronts. A projection of 1-3/16 inches sets the grip off the surface, helping hands catch the pull without scraping doors. A width of 15/32 inch creates a slim front profile that stays visually light while still giving a stable grasp. The pull belongs to the Handles and Pulls class, so it fits standard decorative hardware layouts on cabinets and furniture.
The 5-1/16 inch center to center dimension sets the drilling pattern for this Berenson Transitional Advantage One pull, which lets installers line up all pulls using a 128 mm template. The base diameter of 5/16 inch defines the footprint at each mounting point, so the contact area against the door or drawer is predictable. With an overall length of 7-25/32 inches, the pull spans a noticeable section of the front, giving a clear target when aligning hardware along rails and stiles. The 1-3/16 inch projection sets the standoff from the surface, shaping the clearance behind the grip. Together, these dimensions help support repeatable layouts across banks of cabinets.
This Berenson Transitional Advantage One Series pull is designed for cabinet and drawer applications where a 5-1/16 inch center to center dimension is already planned or preferred. The Handles and Pulls classification places it directly in decorative cabinet hardware work, from kitchens to shop-built furniture. Its Verona Bronze finish supports projects that call for a bronze-toned pull across all fronts, so hardware on doors and drawers can match within the same visual family. With a length of 7-25/32 inches, the pull suits medium to wider drawer faces, helping the hardware visually balance the front without overwhelming narrow doors. The 1-3/16 inch projection allows the pull to stand off the surface, which can be useful on fronts with deeper edge profiles or applied moldings.
The 5-1/16 inch (128 mm) center to center measurement on this pull ties directly to common drilling jigs, which supports fast, repeatable boring across multiple cabinets. Zinc construction means the handle body is a uniform metal, which helps the pull feel consistent from one cabinet to the next. The 15/32 inch width establishes how much of the handle shows from the front, which matters when lining pulls along narrow rails or slab fronts. A base diameter of 5/16 inch defines the bearing circle at the contact point, so the pull meets the surface with a known footprint that works with standard flat cabinet faces. The Verona Bronze finish provides a specific color choice, which helps maintain continuity when multiple pulls from the same Advantage Series collection are used in one installation.
This pull uses a 5-1/16 inch (128 mm) center to center drilling, which sets the hole spacing for mounting on cabinet doors or drawers.
The pull has an overall length of 7-25/32 inches, a projection of 1-3/16 inches from the surface, and a width of 15/32 inch along the front face.
The pull is made from zinc with a Verona Bronze finish, giving a metal handle with a defined bronze coloration for decorative cabinet work.
The 5/16 inch base diameter sets the size of the contact point against the door or drawer, which helps the pull seat cleanly on flat cabinet surfaces.
The pull belongs to the Advantage Series and the Handles and Pulls class, aligning it with decorative cabinet and furniture hardware projects.
The Web Description specifies screw size 8-32 x 1 inch, so the threaded interface is sized for that screw specification.
This Berenson Transitional Advantage One Series pull brings a 5-1/16 inch (128 mm) center to center layout, zinc construction, and a Verona Bronze finish together in one handle. When a project is built around 128 mm drilling and a bronze tone, this 9180-10VB-P pull fits that specification. The defined overall length, projection, width, and base diameter support consistent placement on cabinet doors and drawers across a room. Select this pull when the Advantage Series look and these exact dimensions match the planned hardware pattern.
