
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Berenson Traditional Advantage Three Series knob gives you a 1-1/8 inch diameter pull point that works well on cabinet doors and drawers, so you get a consistent hand feel across the run. The knob is part of the Advantage Series from Berenson Corporation, which helps keep styling and sizing coordinated when you are tying multiple cabinets together. Its zinc die cast construction provides a solid metal knob body, which supports repeatable fastening and a firm grip once mounted. The champagne finish on this knob creates a light, warm tone on the face, which can blend with many cabinet colors in a shop or residential setting. With a projection of 1-1/16 inch, the knob stands off the front enough for fingers to grab it comfortably. The 1-1/8 inch width matches the diameter, so the profile stays balanced in both directions.
This Berenson knob keeps critical dimensions simple: a 1-1/8 inch diameter face and width, a 5/8 inch base diameter, and a 1-1/16 inch projection. That combination lets you plan drilling on doors and drawers knowing how far the knob will extend from the front. The single base point focuses the load at one center hole, which is typical for cabinet knobs and helps keep layout predictable across different cabinet sizes. With the knob body formed from zinc die cast material, the internal threading area is designed for an 8-32 screw size, matching standard cabinet drilling patterns that use that thread.
The 1-1/8 inch diameter on this Berenson Traditional Advantage Three Series knob suits many cabinet door and drawer fronts where a medium-size pull point is preferred, so it can serve across kitchens, shops, or storage runs using similar door sizes. The 5/8 inch base diameter leaves a relatively small ring at the contact area on the door, which helps when working on narrow rail profiles or smaller drawer fronts that benefit from keeping hardware away from edges. Its 1-1/16 inch projection offers enough stand-off for gripping even when surrounding trim or adjacent cabinet doors are close, which can be useful in tighter cabinet grids. The champagne finish lets the knob sit between bright and dark metals, so it can visually bridge mixed hardware finishes within the same job.
The zinc die cast construction of this knob creates a consistent body, which supports uniform torque as the 8-32 screw engages the threaded section during mounting runs. That consistency matters when you are installing multiple knobs along tall pantry doors or long drawer stacks, because each connection point behaves similarly as you tighten. The matching 1-1/8 inch width and diameter keep the knob shape symmetrical, which simplifies visual alignment when you use jigs or templates for drilling. A 1-1/16 inch projection means that once installed, each knob stands off the face by a known amount, helping drawers and doors clear adjacent surfaces as they move. With a 5/8 inch base diameter, the knob centers neatly over a single bore, supporting repeatable positioning when working from standard centerline measurements. The champagne finish offers a uniform surface, which helps a row of knobs read as a continuous line when viewed along a cabinet run.
The Berenson Traditional Advantage Three Series knob has a 1-1/8 inch diameter, giving a medium-size grip area suitable for typical cabinet doors and drawers.
The 0912-10CZ-P knob has a 1-1/16 inch projection, so it stands off the cabinet face enough to allow comfortable finger clearance when pulling.
The Traditional Advantage Three Series knob is made from zinc die cast material, providing a solid metal body and consistent threaded engagement.
This Berenson cabinet knob has a champagne finish, giving it a light metallic color that pairs with many decorative hardware layouts.
The base diameter of the knob is 5/8 inch, creating a compact footprint that covers the mounting hole while keeping a small contact ring on the door.
This Berenson knob is designed for an 8-32 screw size, aligning with common cabinet hardware threading for straightforward installation.
The Berenson Traditional Advantage Three Series champagne knob, part number 0912-10CZ-P, brings a 1-1/8 inch diameter face, 5/8 inch base, and 1-1/16 inch projection together in a zinc die cast body. Those dimensions support consistent drilling and gripping across cabinet doors and drawers, while the champagne finish keeps the visual line unified. For projects where a medium-size knob and a familiar 8-32 screw thread are the target, this knob offers a straightforward match for planned layouts.