Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Berenson Contemporary Advantage One knob gives you a compact 1-1/8 inch square pull point for cabinet doors or drawers, so hands get a positive grip without crowding adjacent fronts. The knob is part of the Advantage Series, which keeps style consistent across a project where matching decorative hardware matters. Its zinc die cast construction creates a solid, uniform body, helping the knob seat cleanly against the cabinet surface for a finished look. The polished chrome finish reflects surrounding materials and colors, so the knob visually ties in with hinges, faucets, or appliance trim on the same run. With both length and width at 1-1/8 inch and a base diameter of 7/16 inch, the knob transitions cleanly from cabinet face to hand contact area, which helps installers align multiple knobs in straight visual lines.
This Berenson Contemporary Advantage One knob uses an 8-32 x 1 inch screw interface, so installers can run a familiar tap and drill pattern when preparing door and drawer fronts. With the knob body measuring 1-1/8 inch in both length and width, layout is straightforward on narrow rails or stile edges because the hardware stays within typical face-frame and slab dimensions. The 7/16 inch base diameter seats against the cabinet surface, giving a clear reference circle for aligning to layout marks. A projection of 15/16 inch sets the knob out at a practical grab distance, supporting finger clearance without overextending into tight galley or corridor runs. The zinc die cast construction supports these dimensions with a stable, uniform form, which helps the knob sit flush and track square to the front when tightened.
The 1-1/8 inch by 1-1/8 inch face size makes this Berenson Contemporary Advantage One knob well-suited to standard cabinet doors and drawers in kitchens, baths, or casework built around similar scale fronts. Its polished chrome finish visually coordinates with other polished chrome elements in a room, so hardware can follow a single finish story from cabinets to adjacent fittings. The 7/16 inch base diameter creates a compact contact point against the cabinet surface, which is useful when installing on narrow rails or inset panels where extra hardware width could crowd edges. A projection of 15/16 inch provides enough stand-off for hands to pull comfortably on heavier drawers while still keeping fronts looking tight and controlled. Because it is part of the Advantage Series, this knob also supports layouts where multiple knob and pull styles from the same family need to read as one system.
Every main dimension on this knob is defined: 1-1/8 inch length or diameter, 1-1/8 inch width, 7/16 inch base diameter, and 15/16 inch projection, so installers can set up drilling jigs and spacing with confidence that hardware will align consistently. The square 1-1/8 inch face provides a clear center point, simplifying measurement from door or drawer edges when building repetitive runs of cabinets. With a 7/16 inch base diameter, the contact circle remains small enough that slight variations in edge reveals are less noticeable, which can reduce visible misalignment across long banks. The 15/16 inch projection keeps the pull point close to the cabinet, supporting a clean profile that still leaves fingers space behind the knob. Zinc die cast construction anchors these dimensions in a rigid body, which helps the knob resist twisting out of alignment after installation.
The Berenson Contemporary Advantage One knob has a 1-1/8 inch length or diameter and a 1-1/8 inch width, giving it a compact, square-profile pull area suited to standard cabinet doors and drawers.
The knob has a 15/16 inch projection, setting the grip point just under one inch off the cabinet front so fingers clear the surface while the hardware stays close to the case.
The knob is made from zinc die cast material, which provides a solid, uniform body that helps the polished chrome finish present evenly on cabinet faces.
The Berenson Contemporary Advantage One knob is designed for an 8-32 x 1 inch screw, matching a common cabinet hardware thread and length for typical door and drawer fronts.
The knob has a 7/16 inch base diameter, creating a defined contact circle on the door or drawer front that aids in centering and consistent visual reveals.
The polished chrome finish reflects light and surrounding colors, helping the knob coordinate with other polished chrome components and giving cabinets a crisp, reflective hardware accent.
The Berenson Contemporary Advantage One knob in polished chrome combines defined dimensions with zinc die cast construction, giving installers a predictable 1-1/8 inch square pull point that lays out cleanly across doors and drawers. Its 15/16 inch projection and 7/16 inch base diameter support comfortable use while maintaining tight visual lines on face frames and slab fronts. For projects calling for a polished chrome Advantage Series solution, this knob provides a consistent hardware element that aligns easily to drilling patterns and finish selections.
Sold In: 1 Each
