Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Berenson Transitions II Series knob gives you a compact 1-1/8 inch by 1-1/8 inch pull point for cabinet or furniture fronts, so doors and drawers can be operated with a controlled, easy grip. The zinc die cast material creates a solid-feeling knob body, which supports repeatable use on frequently accessed fronts in kitchens, baths, or shop fixtures. The matte black finish provides a low-sheen look, helping the knob visually blend with other matte black decorative hardware on the job. The 15/16 inch projection keeps the hand clear of the cabinet face, which reduces knuckle contact when opening heavier doors. With a 7/16 inch base diameter, the transition from cabinet face to knob remains compact, which is useful when layout spacing or tight rail widths are part of the installation plan.
The Berenson Corporation knob uses an 8-32 x 1 inch screw size, giving installers a familiar threaded interface for cabinet doors and drawer fronts that accept standard 8-32 machine screws. This standard sizing supports straightforward field work when drilling or verifying hole preparation on new or existing fronts. The 1-1/8 inch width and length define the knob edge-to-edge footprint, which is helpful when aligning multiple knobs at equal offsets from door edges or drawer sides. With a 15/16 inch projection, the knob extends just under 1 inch from the surface, keeping it within common reach expectations on cabinets while still allowing fingers to wrap around the pull point. The 7/16 inch base diameter further defines the bearing area against the substrate, guiding decisions about placement on narrow face frame members.
This Berenson Transitions II Series knob is categorized under Decorative Hardware & Moldings in the Knobs class, which positions it for use on cabinet doors, drawers, and similar furniture fronts where a discrete pull point is needed. The 1-1/8 inch length and 1-1/8 inch width give it a balanced, compact shape suited to both small and medium-size fronts without overpowering narrow faces. Its matte black finish pairs naturally with matte black hinges or other matte black decorative hardware, supporting consistent visual lines on coordinated installations. The zinc die cast construction provides a solid-feeling touch point, which is useful on doors or drawers that see frequent handling in kitchens, baths, or work areas. With a 15/16 inch projection, the knob offers enough stand-off for a good grip on thicker doors while still keeping profiles tight in walkways or tight clearances.
The clear 1-1/8 inch stated length or diameter helps installers mark repetitive centerlines, which is valuable when running rows of knobs across multiple cabinets and drawers. The 7/16 inch base diameter defines how much of the front will be covered at the mounting point, aiding in placement when working near panel edges or decorative trim. Using the 8-32 x 1 inch screw size ties the knob to a common cabinet hardware standard, which simplifies replacement of existing knobs that already use 8-32 threaded holes. The manufacturer part number 0951-1055-P and the Advantage Series collection reference make it straightforward to match this knob with other Berenson pieces on the same project. Being identified as Berenson Corporation decorative hardware within the Berenson knobs product class also supports long-term sourcing consistency when additional fronts are added or remodeled later.
The knob has a 1-1/8 inch length, 1-1/8 inch width, 15/16 inch projection, and a 7/16 inch base diameter, which defines the footprint, stand-off, and contact area on the cabinet face.
The Berenson 0951-1055-P knob is zinc die cast, providing a dense, uniform body that supports repeated use on cabinet doors and drawers in everyday environments.
This Advantage Series cabinet knob has a matte black finish, giving it a low-sheen appearance that coordinates with other matte black decorative hardware on the project.
This cabinet knob uses an 8-32 x 1 inch screw size, so it matches standard cabinet drilling and threading commonly used for doors and drawer fronts.
The matte black zinc knob has a 15/16 inch projection, creating hand clearance from the cabinet face while keeping the profile compact in tight spaces.
This Berenson knob is identified as part of the Transitions II Series in the Advantage Series collection, which helps align it with matching Berenson decorative hardware.
The Berenson Transitions II Series matte black 1-1/8 inch knob offers a zinc die cast construction, 15/16 inch projection, and 7/16 inch base diameter, so layout, grip, and cabinet contact are clearly defined. With its 8-32 x 1 inch screw size and square 1-1/8 inch footprint, the knob fits cabinet doors and drawers that follow standard drilling practices while maintaining a compact, modern profile. For projects built around matte black decorative hardware from Berenson Corporation, this Advantage Series cabinet knob provides matching dimensions and finish details that support consistent results across new installations or future additions.
Sold In: 1 Each
