Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Berenson Transitions II knob gives you a compact 1-1/8 inch square pull point for cabinet and furniture doors where a small footprint matters. The knob length and width are both 1-1/8 inches, so it presents a balanced shape that lines up cleanly on face frames or drawer fronts. The 15/16 inch projection sets the hand grip slightly off the surface, which creates enough clearance for fingers while keeping the profile tight to the door or drawer. The zinc die cast material forms a solid, consistent body that supports repeat drilling patterns across a run of cabinets. The satin champagne finish provides a muted metallic look that can coordinate with other champagne-finished decorative hardware on the same project. This knob sits on a 7/16 inch base diameter, which helps visually transition from the mounting point to the full 1-1/8 inch face.
This Berenson Corporation knob is identified as part number 0952-10CZ-P, which ties it directly to the Transitions II Series and Advantage Series descriptions for consistent reordering. The knob length or diameter is specified at 1-1/8 inch, and the width is also 1-1/8 inch, so installers can plan hole locations and reveals knowing the face of the knob will sit within that footprint. The stated 15/16 inch projection defines how far the knob extends from the mounting surface, which matters when doors open near adjacent walls or appliances. A base diameter of 7/16 inch shows how much area around the screw hole is visually covered at the cabinet face, which is useful when laying out on narrow rails.
This knob is categorized under Decorative Hardware and Moldings in the knobs class, so it is suited for cabinet and furniture applications where appearance and function both matter. The satin champagne finish allows this piece to sit alongside other champagne-toned hardware, supporting a coordinated look across doors and drawers. Because the knob measures 1-1/8 inch in both length and width, it works well on standard kitchen, bath, and built-in cabinet fronts where a modest-sized pull is preferred. The 7/16 inch base diameter focuses the contact area, so it fits visually on narrower frame members without overwhelming the rail. With its zinc die cast construction, the knob provides a solid-feeling touch point that can be repeated across banks of doors and drawers in a project.
The defined 15/16 inch projection is helpful when planning clearances so the knob does not interfere with adjacent surfaces while still giving enough space for fingers to pull. Matching 1-1/8 inch dimensions for length and width give a predictable square profile, which simplifies layout when aligning multiple knobs along a cabinet run. The 8-32 x 1 inch screw size listed for this knob aligns with common cabinet hardware threading, which helps standardize drilling and installation on shop-built or onsite work. Because the knob is described as part of the Advantage Series and Transitions II Series from Berenson Corporation, it can be specified by name and manufacturer part number 0952-10CZ-P for repeat projects or replacements. The zinc die cast material supports a consistent exterior finish, helping each knob present the same satin champagne appearance across an installation.
The knob has a 1-1/8 inch length and a 1-1/8 inch width, providing a compact square-style face that is easy to position on typical cabinet doors and drawers.
The knob projection is 15/16 inch, setting the gripping surface slightly off the cabinet face so fingers can pull the door or drawer without excessive stand-off.
The knob is made from zinc die cast, creating a solid, uniform body that supports consistent appearance and feel across multiple installed pieces.
This knob has a satin champagne finish, giving a soft metallic tone that coordinates with other champagne-finished decorative hardware in the same project.
The base diameter is 7/16 inch, defining the contact area on the cabinet face and the amount of coverage around the drilled mounting hole.
The knob data specifies an 8-32 x 1 inch screw size, indicating the threading used at the knob and supporting alignment with typical cabinet hardware standards.
The Berenson Transitions II Series satin champagne knob combines 1-1/8 inch by 1-1/8 inch dimensions with a 15/16 inch projection, giving a compact but usable grip point on cabinet doors and drawers. Its zinc die cast construction and 7/16 inch base diameter create a defined mounting footprint that suits standard face frame and frameless layouts. With the satin champagne finish and clearly identified manufacturer part number 0952-10CZ-P, this knob can be specified and repeated confidently across kitchen, bath, and casework projects where a coordinated decorative hardware look is required.
Sold In: 1 Each
