Berenson Edge Pull Series 2-3/16" (56 mm) Center to Center Polished Chrome Tab Pull, - 9004-4026-P

Berenson Edge Pull For Clean Modern Grips

Berenson edge pull from the Advantage Two Series is an aluminum tab pull in a polished chrome finish designed for decorative cabinet and furniture applications where a slim, modern grip is needed at the panel edge. The pull has a 2-3/16 inch (56 mm) center to center dimension, which sets precise hole spacing for drilling and templating on doors or drawer fronts. Its overall length of 3 inches gives a compact hand contact area that suits smaller fronts or tight layouts. A projection of 1-21/32 inches provides finger clearance away from the surface, helping the user grab and operate doors or drawers comfortably. The 3/4 inch width defines the visible face of the pull, creating a narrow visual line that works in contemporary layouts. A base diameter of 3/4 inch outlines the mounting footprint at the edge, supporting stable contact with the substrate.

Key Advantage Two Edge Pull Working Details

• The Advantage Two Series designation ties this tab pull into Berenson Corporation decorative hardware families, helping match style across a project when coordinating multiple pulls in the same visual line.
• Aluminum material keeps the pull lightweight while forming the tab profile, which matters when installing multiple pulls on cabinet fronts that benefit from lower hardware mass across doors and drawers.
• The polished chrome finish gives the pull a bright reflective surface, which affects how it visually contrasts with cabinet materials and supports use in installations targeting a crisp, modern hardware look.
• The 2-3/16 inch (56 mm) center to center dimension defines fixed mounting hole spacing, which is important when preparing jigs or setting up repetitive drilling patterns on a production run of fronts.
• The 3 inch overall length and 3/4 inch width shape the hand contact area and face coverage, guiding placement where a compact tab profile is needed without crowding adjacent hardware or edges.
• The 1-21/32 inch projection sets the stand-off from the surface, giving users finger room when pulling while also influencing clearance in front of doors or drawers near adjacent components.

Installation Dimensions For Accurate Hole Layout

The 2-3/16 inch (56 mm) center to center measurement on this Berenson Corporation tab pull is the primary installation reference, because it controls where to drill or bore for mounting in the edge zone of the cabinet front. A 3 inch overall length means the pull extends slightly beyond the hole pattern, which affects edge positioning when aligning the pull flush with the panel line. The base diameter of 3/4 inch at the mounting area sets the footprint that contacts the surface, guiding how close units can be spaced on narrow rails or stiles. With a 3/4 inch width, installers can plan consistent reveals and margins, helping align multiple pulls so faces line up visually across banks of doors and drawers.

Using This Polished Chrome Tab Pull On Projects

Where The Advantage Two Edge Pull Fits Best

This Berenson 9004-4026-P aluminum tab pull fits cabinet and furniture projects that use decorative hardware from the Advantage Two Series to maintain consistent styling. The 3 inch overall length makes it suitable for smaller cabinet doors, drawers, or panel fronts where a compact pull is preferred over longer handles. Its polished chrome finish supports use on fronts that benefit from a bright metal accent, creating contrast against painted, laminated, or wood surfaces in the installation. The 2-3/16 inch (56 mm) center to center spacing allows this pull to align with layouts built around that specific drilling pattern, which can matter when coordinating with other components or pre-drilled fronts. The 1-21/32 inch projection helps the pull function as a practical grip point at the edge, giving fingers clearance from the surface while opening doors or drawers in normal use.

Details That Support Consistent Pull Alignment

The defined 2-3/16 inch center to center dimension supports repeatable drilling across multiple fronts, helping installers use jigs or templates to maintain alignment from cabinet to cabinet. Because the pull is 3 inches long, it leaves small overhangs beyond the hole centers that guide consistent setback from panel edges when positioning each unit. The 3/4 inch width sets a predictable face dimension, which helps align pulls vertically on tall doors or horizontally on drawer stacks so sightlines remain uniform. The projection value of 1-21/32 inches affects clearance relative to adjacent doors, walls, or appliances, which is important when planning tight installations where door swing or drawer travel passes near other surfaces. The aluminum construction contributes to a stable yet lightweight component, aiding handling during layout and fastening on repetitive jobs.

Common Questions About This Edge Tab Pull

Select This Edge Pull For Defined Layouts

The 2-3/16 inch (56 mm) center to center spacing, 3 inch length, and 3/4 inch width of this Berenson edge pull give installers clear dimensions for planning consistent layouts across cabinets. Its aluminum construction and polished chrome finish support decorative hardware use where a compact, bright tab profile is preferred. For projects that rely on defined drilling patterns and matching hardware style within the Advantage Two Series, this polished chrome tab pull offers the specified sizes needed to align fronts and maintain uniform grip points.