Berenson Contemporary Advantage One Series 7-9/16" (192 mm) Center to Center Verona Bronze Pull, - 9032-40VB-P

Berenson Contemporary Advantage One Pull For Cabinets

Berenson Contemporary Advantage One pull gives cabinet doors and drawers a consistent 7-9/16 inch center to center grip span, which sets drill layout and alignment across a run of fronts. The 192 mm center to center dimension works for metric-based layouts while still matching the stated 7-9/16 inch spacing on shop drawings. Aluminum construction keeps the pull light, which eases handling during repetitive installation across multiple cabinets. The 8 inch overall length provides a clear visual edge-to-edge reference when positioning the pull relative to stile or drawer edges. A Verona Bronze finish defines the look of the pull, giving a specific color target when coordinating with other decorative hardware. As part of the Advantage Series from Berenson Corporation, the pull fits into a defined collection, which matters when a job calls for matching handles on doors, drawers, and panels.

Key Details That Support Cabinet Hardware Layout

• The 7-9/16 inch center to center dimension sets a fixed hole spacing, which simplifies jig setup and repeatable drilling across multiple cabinet doors and drawers on a project.
• The 8 inch length or diameter figure defines the overall handle span, helping with visual proportioning on wide drawers or tall doors where handle size can affect layout balance.
• The 1-9/32 inch projection specifies how far the pull stands off the front, which affects hand clearance and reduces interference with adjacent fronts during normal opening and closing.
• The 13/32 inch width describes the gripping surface, which informs how the pull will feel in hand and how it visually presents on narrow face frames or rail sections.
• The 7/16 inch base diameter indicates the footprint at each mounting point, helping assess coverage over drilled holes and alignment marks on finished cabinet surfaces.
• The Verona Bronze finish detail provides a defined appearance, aiding coordination with other Verona Bronze decorative hardware and moldings on the same job.

Dimensional Details That Guide Installation Work

The 7-9/16 inch center to center value defines the exact screw spacing, so installers can set drilling templates once and repeat that spacing along a full bank of doors or drawers. The 192 mm reference on the pull translates that same spacing for metric layout tools on site or in the shop. An 8 inch overall length creates predictable edge clearances when a layout calls for specific setbacks from stile or drawer edges. The 1-9/32 inch projection figure shows how far the pull stands off the face, which supports planning for door swing near walls or other fronts. With a 13/32 inch width and 7/16 inch base diameter, the pull has defined bearing surfaces at the contact points, which helps evaluate coverage over finished drilling.

How This Verona Bronze Pull Fits Real Projects

Where This Advantage Series Pull Is Typically Used

This pull sits in the Decorative Hardware & Moldings, Handles and Pulls category, so it is oriented to cabinet doors and drawers in woodworking projects. As a handle classified under Berenson, the piece lines up with other Berenson Corporation offerings when a project standardizes on that brand. The 7-9/16 inch center to center span works well on wider cabinet drawers where longer pulls can improve leverage across the front. In kitchens or built-ins using Verona Bronze finishes, this pull provides a defined color and material reference for coordinating other visible hardware. The aluminum material keeps each pull light on the face of the cabinet, which can be useful when fitting multiple pulls on large, mobile, or wall-mounted units.

Why The 192 mm Sizing And Profile Support Consistency

The 192 mm center to center measurement aligns the pull with a common metric size, which matters when using metric-based drilling jigs or CNC layouts. That same spacing, stated as 7-9/16 inch, keeps the part usable on inch-based plans without conversion on the job. An 8 inch overall length provides a clear, repeatable visual reference, so each pull can be lined up relative to panel edges in a consistent way. The 1-9/32 inch projection dimension defines standoff, which helps maintain hand space behind the pull on thicker door styles. With a 13/32 inch width and 7/16 inch base diameter, the profile and contact area are known, which assists in planning hole positions on narrow rails to keep enough material around the fastener points. Being part of the Advantage Series ties this pull to a recognizable line, helpful when future work needs matching replacements or extensions of an existing installation.

Practical Questions About This Berenson Cabinet Pull

Select This 192 mm Pull For Coordinated Cabinets

The 9032-40VB-P Berenson Contemporary Advantage One pull offers a defined 7-9/16 inch, or 192 mm, center to center spacing, which fits layouts built around that size. Its aluminum construction, 8 inch overall length, and 1-9/32 inch projection provide known dimensions for planning cabinet fronts. With a Verona Bronze finish and placement in the Advantage Series, the pull fits projects that call for coordinated decorative hardware across multiple cabinets. For work requiring consistent drilling patterns and a specific Verona Bronze look, this pull aligns with those requirements on doors and drawers.