Berenson Contemporary Advantage Two Series 3-3/4" (96 mm) Center to Center Polished Chrome Pull, - 9034-4026-P
Description
Berenson Contemporary Advantage Two Pull For Cabinets
Berenson Contemporary Advantage Two pull gives you a 3-3/4 inch (96 mm) center to center handle that works well where consistent drill spacing is needed across multiple cabinet doors or drawers. The pull is part of the Advantage Series from Berenson Corporation, so it aligns with that decorative hardware family for coordinated projects. The aluminum material keeps the pull lightweight during handling and layout while still providing a solid grip surface. A polished chrome finish creates a bright, reflective look that ties into other chrome-finished decorative hardware and moldings on the job. The pull length of 6-5/16 inches provides hand clearance across a wider section of the cabinet face, useful on both base and wall cabinets. A 1/4 inch width gives a slim front profile, which helps when a cleaner, contemporary hardware line is needed on modern cabinetry.
Practical Details That Support Cabinet Hardware Work
- The 6-5/16 inch overall length gives a predictable footprint on the door or drawer front, helping layout lines stay consistent from cabinet to cabinet.
- A 3-3/4 inch (96 mm) center to center dimension matches a common boring pattern, which aids repeat drilling setups on cabinet runs.
- The 1-1/16 inch projection sets the pull out from the face, giving finger clearance that helps users grab the pull comfortably in daily use.
- The 1-1/2 inch base diameter provides a defined contact area at each mounting point, which helps visually align the pull with rail or stile widths.
- The polished chrome finish delivers a reflective surface that visually coordinates with other chrome decorative hardware and moldings in the same space.
- The narrow 1/4 inch width keeps the pull profile slim, which supports a contemporary appearance on flat-panel or simple door styles.
Mounting Dimensions For Straightforward Cabinet Alignment
The 96 mm center to center mounting on this pull allows holes to be drilled to a clear metric measurement while still equating to a 3-3/4 inch pattern for mixed measuring on site. The 1-1/16 inch projection positions the gripping surface away from the cabinet face so hands clear door edges during opening. A 1-1/2 inch base diameter at each end helps the pull sit flush over the bored area, supporting a neat interface with the door or drawer surface. The overall 6-5/16 inch length makes it easier to visually center the pull on wider drawer fronts without overwhelming narrower doors. Combined with the 1/4 inch width, these dimensions support a clean, linear look on both frame and frameless cabinet construction.
Using This 9034-4026-P Pull In Cabinet Projects
Where This 96 Mm Center To Center Pull Fits
This 96 mm center to center pull fits cabinet layouts that follow a 3-3/4 inch boring pattern, so it works across doors and drawers planned around that spacing. The pull falls within the Decorative Hardware & Moldings - Handles and Pulls category, making it suitable for cabinetry where a defined handle is preferred over a knob. Its placement within the Advantage Series means it can align with other pulls from the same collection when a unified look is desired across a kitchen, bath, or built-in run. The polished chrome finish lets it match other polished chrome elements in the room, from hinges to faucets, so designers can carry a single finish across multiple hardware points. With a 6-5/16 inch length and 1-1/16 inch projection, the pull offers usable grip space on typical residential or commercial cabinet fronts.
Why These Berenson Advantage Series Details Matter
The aluminum construction makes the pull easier to handle during repetitive installation on large jobs while still giving a defined gripping surface once mounted. The polished chrome finish is part of the stated design, so it provides a consistent, glossy appearance from one pull to the next on a run of cabinets. A 1/4 inch width keeps the pull visually light, which helps maintain straight sightlines when multiple pulls are aligned along upper or lower cabinetry. The 1-1/2 inch base diameter helps hide the immediate area around the mounting bore, which supports a clean finished look after drilling. The manufacturer part number 9034-4026-P clearly identifies this specific geometry and finish within Berenson Corporation offerings, helping match existing installations that already use this pull. As a handle and pull in the Berenson class, it serves as a primary touch point on cabinets while aligning with the overall decorative hardware plan.
Common Questions About This Berenson Cabinet Pull
What are the key dimensions of the 9034-4026-P pull?
The 9034-4026-P pull has a 3-3/4 inch (96 mm) center to center, 6-5/16 inch overall length, 1-1/16 inch projection, 1/4 inch width, and 1-1/2 inch base diameter, giving clear layout references.
How does the 96 mm center to center spacing help cabinet work?
The 96 mm center to center spacing lines up with a common boring pattern, so installers can repeat drilling setups accurately across multiple cabinet doors and drawers.
What material and finish does this Advantage Series pull use?
This Advantage Series pull uses aluminum with a polished chrome finish, giving a lightweight handle with a bright, reflective surface for coordinated decorative hardware layouts.
Where is this pull positioned within cabinet hardware categories?
The pull is listed under Decorative Hardware & Moldings in the Handles and Pulls and Berenson product classes, placing it as a dedicated cabinet handle solution.
How does the 1-1/16 inch projection affect daily cabinet use?
The 1-1/16 inch projection moves the pull away from the cabinet face, providing finger clearance so doors and drawers can be gripped comfortably during regular use.
Why might the 6-5/16 inch length be useful on drawers?
The 6-5/16 inch length spreads the grip area across more of the drawer front, helping balance the hardware visually on wider drawers while keeping a slim, 1/4 inch profile.
Select This Pull For Consistent Cabinet Layouts
This Berenson Contemporary Advantage Two pull from Wurth Baer Supply provides a defined 3-3/4 inch (96 mm) center to center layout with a 6-5/16 inch overall length, so cabinet runs can follow one consistent boring pattern. The aluminum construction with polished chrome finish supports a contemporary hardware look that coordinates with other Advantage Series pieces in the same finish. With a 1-1/16 inch projection, 1-1/2 inch base diameter, and slim 1/4 inch width, the pull balances grip comfort, clearance, and a clean profile. For projects calling for a polished chrome handle in the Berenson hardware family, this 9034-4026-P model offers clear, repeatable dimensions for planning and installation.