Berenson Contemporary Advantage Three Series 3-3/4" (96 mm) Center to Center Polished Chrome Pull, - 9117-1026-P

Berenson Contemporary Advantage Three Pull For Cabinets

Berenson Contemporary Advantage Three pull gives cabinets a 3-3/4 inch (96 mm) center to center handle layout that lines up with common drilling patterns, which helps streamline layout when you are working across multiple doors and drawers. The pull is made from zinc, so it provides a solid metal feel while allowing consistent shaping across a job. A polished chrome finish reflects surrounding surfaces, which helps this pull visually match other chrome details in a kitchen or bath. The overall length of 4-3/16 inches keeps the grip compact, which is useful on smaller faces where space around the edge is tight. A projection of 1-3/16 inches creates finger clearance between the cabinet face and the handle, supporting comfortable use on thicker doors. The 1/2 inch width gives a defined edge for gripping, which helps with repeatable opening and closing in daily use.

Key Cabinet Pull Details That Support Workflow

• The 3-25/32 inch center to center dimension, listed as 96 mm, ties directly to standard boring setups, which simplifies layout when drilling multiple fronts on cabinetry runs.
• The 4-3/16 inch length keeps the pull balanced on typical cabinet rails, which helps finished installations look aligned across doors and drawers of similar width.
• A projection of 1-3/16 inches holds the hand away from the cabinet surface, which can reduce finger contact with finished faces during frequent use.
• The 1/2 inch width creates a narrow yet distinct gripping surface, which is helpful when users approach the pull from different angles in tight spaces.
• The polished chrome finish creates a bright reflective surface, which makes it suitable where other polished chrome parts are already part of the hardware scheme.

Installation Dimensions And Cabinet Fit Details

This cabinet pull uses a 3-25/32 inch center to center mounting dimension, identified as 96 mm, so it fits straight runs drilled on that spacing. The pull is designed around an 8-32 x 1 inch screw interface, which aligns with a common cabinet pull thread size used in many shop setups. The base diameter of 25/32 inch gives each mounting point a defined footprint on the door or drawer front, which helps visually frame the pull against the panel. With a total length of 4-3/16 inches, the pull sits slightly beyond the hole spread, which provides visible lead-in points near each base for consistent alignment.

Using This Polished Chrome Pull In Cabinet Projects

Where The 3-3/4 Inch Pull Works Best

This 3-3/4 inch center to center pull fits cabinet layouts that rely on a consistent 96 mm drilling pattern, which is common on many modular kitchen and bath runs. The pull belongs to the Advantage Series collection, so it follows a coordinated design language that can be repeated across doors and drawers in the same project. Its polished chrome finish aligns with other polished chrome hardware, which helps maintain visual continuity when specifying hinges, faucets, or other bright metal details in the room. The 4-3/16 inch overall length keeps the pull proportioned for standard cabinet faces, which suits both narrow drawer fronts and typical door rails in many installations. Because the pull is categorized under handles and pulls for decorative hardware and moldings, it targets visible cabinet and furniture applications rather than hidden structural roles.

Details That Help Repeatable Layout And Operation

The 96 mm center to center measurement gives installers a clear reference for jigs and boring equipment, which supports repeatable hole placement across multiple fronts. An 8-32 x 1 inch screw size connection matches a common fastener spec, which allows crews to work with familiar tooling when driving the pull into place. The 1-3/16 inch projection from the mounting surface separates the gripping area from the finished face, which limits knuckle contact with painted or stained surfaces during regular opening cycles. A 1/2 inch width keeps the handle slim while still presenting an edge that fingers can catch quickly, which is useful in high-traffic areas where doors and drawers are operated frequently. The base diameter of 25/32 inch creates a defined visual pad around each mounting point, which can help disguise slight variations in drilling while keeping the installation looking clean.

Common Questions About This Berenson Cabinet Pull

Select This Pull For 96 Mm Cabinet Layouts

The Berenson Contemporary Advantage Three pull, model 9117-1026-P, pairs a 96 mm center to center layout with a polished chrome finish, which suits projects built around that drilling pattern and finish choice. Its zinc construction, 4-3/16 inch length, 1-3/16 inch projection, and 1/2 inch width create a compact, consistent handle profile for cabinet doors and drawers. For jobs that standardize on Advantage Series styling and polished chrome hardware, this pull offers a defined set of dimensions and finish characteristics that can be repeated across the run.