Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Berenson Contemporary Advantage Three pull provides a matte black handle option for cabinet and drawer fronts where a modern look is needed. This pull is made from zinc, giving a metal construction that supports everyday cabinet use in kitchens, baths, and built-ins. The center to center dimension of 3-25/32 inches defines the drilling pattern, so it matches layouts designed around this specific spread. Overall length of 4-3/16 inches gives hand clearance beyond the screw locations, helping users grip comfortably when opening doors or drawers. A projection of 1-3/16 inches sets the standoff from the cabinet face, which affects how fingers engage the pull and how far fronts sit from adjacent surfaces. Width of 1/2 inch keeps the profile streamlined while still offering a defined edge to grab. The matte black finish delivers a non-reflective appearance that works well across a range of cabinet colors.
The center to center measurement of 3-25/32 inches sets the critical distance between mounting points, guiding drilling when setting up new cabinetry or replacing existing pulls with the same spread. Screw size of 8-32 x 1 inch defines the threaded connection, aligning with common cabinet boring thicknesses where this length can reach from the back of the door or drawer front into the pull body. Base diameter of 25/32 inch indicates the footprint at each mounting point, which helps cover the drilled hole area and contributes to visual proportion against rail or stile widths. With an overall length of 4-3/16 inches and projection of 1-3/16 inches, installers can gauge how this handle will sit relative to adjacent doors, walls, and appliance panels to maintain clearances.
The Berenson Contemporary Advantage Three Series 3-3/4 inch center pull is suited to cabinet and drawer fronts designed around a 3-25/32 inch drilling spread, so it aligns with layouts that follow this near-3-3/4 inch standard. Its placement within Decorative Hardware & Moldings under Handles and Pulls defines it as a primary operating point on doors and drawers rather than a decorative trim piece, so it functions as the main touch surface for opening fronts. The matte black finish supports use on modern and transitional cabinet styles where a dark, uniform handle line is preferred along rails or drawer heads. Because the pull body is zinc, it provides a metal feel when gripped, aligning with projects where a substantial touchpoint is desired on frequently used kitchen, bath, or storage cabinetry.
The 3-25/32 inch center to center measurement works as the controlling dimension when templating multiple cabinets, helping rows of pulls align consistently across a run of doors and drawers. Overall length of 4-3/16 inches provides a known edge-to-edge size, which helps plan spacing from door edges, appliance gaskets, or adjacent hardware so handles do not visually crowd each other. Projection of 1-3/16 inches defines the standoff from the face, which influences how easily fingers can reach behind the pull when doors are flush across a shared plane. Width of 1/2 inch shapes the pull as a slim bar, which affects how many pulls can sit near each other on smaller drawer fronts without appearing oversized. Base diameter of 25/32 inch at each mounting point sets how much area around each screw hole is concealed, which is useful when aligning with existing bores or when drilling through decorative rails. Together, these dimensions support repeatable hardware placement across full cabinet runs and replacement scenarios built around the same spread.
The Berenson Contemporary Advantage Three pull has a 3-25/32 inch center to center size, which sets the distance between holes and aligns with layouts planned around this near-3-3/4 inch spread.
The Berenson 9118-1055-P pull has an overall length of 4-3/16 inches, which defines the end-to-end dimension and helps position it relative to cabinet edges and neighboring hardware.
This matte black pull is made from zinc, giving a metal construction that supports a solid feel when gripping doors or drawers in everyday cabinet use.
The pull projects 1-3/16 inches from the cabinet face, providing finger clearance behind the handle while keeping the profile relatively close to the door or drawer front.
This cabinet pull uses 8-32 x 1 inch screws, so the threaded engagement is sized for typical cabinet door and drawer front thicknesses that match this screw length.
The pull has a 1/2 inch width and a 25/32 inch base diameter, setting a slim handle profile with bases sized to cover the mounting hole area on cabinet fronts.
The Berenson Contemporary Advantage Three Series 3-3/4 inch center pull in matte black combines zinc construction with a 3-25/32 inch center to center layout, supporting cabinet runs built around this drilling spread. Its 4-3/16 inch length, 1-3/16 inch projection, and 1/2 inch width define how it will sit and feel on doors and drawers. For projects needing a consistent matte black line of handles using this specific mounting dimension, this pull from Wurth Baer Supply aligns hardware appearance and layout across the job.
Sold In: 1 Each
