Berenson Contemporary Advantage Five Series 5-1/16" (128 mm) Center to Center Champagne Pull, - 9127-10CZ-P

Berenson Contemporary Advantage Five Pull For Cabinets

Berenson Contemporary Advantage Five pull is a cabinet handle from the Advantage Series that uses a 5-1/16 inch (128 mm) center to center mounting, so drilled hole spacing lines up with this common size on many cabinet layouts. The pull is made from zinc, which provides a solid metal construction that stands up to everyday cabinet use in kitchens, baths, and shop furniture. Its champagne finish gives a warm, muted metal look that suits many contemporary and transitional cabinet styles where a softer metallic tone is preferred. The pull measures 6-9/16 inches in overall length, giving good hand clearance along the drawer or door front for a full-finger grip. A 1 inch base diameter at each end spreads the contact area on the cabinet surface, which helps distribute load around the mounting points during repeated opening and closing.

Key Details That Support Cabinet Projects

• The 5-1/16 inch (128 mm) center to center dimension sets the hole spacing, which simplifies layout on new doors and also matches many pre-drilled cabinet fronts for straightforward handle changes.
• The zinc material gives the pull a metal body, which supports a firm feel when opening heavier cabinet doors or drawers in kitchens, work areas, or shop environments.
• The champagne finish defines the surface appearance, providing a soft metallic tone that works with a range of cabinet colors where a bright polished look is not desired.
• The 6-9/16 inch overall length creates a longer grasping area, which helps users get a comfortable hand position on wider drawers or tall doors without crowding the fingers.
• The 1-3/16 inch projection sets the stand-off from the cabinet face, creating finger clearance between the pull and the door or drawer front during everyday operation.
• The 5/16 inch width gives the bar portion a slim profile, allowing a clean, contemporary line across the front while still offering enough surface to pull without sharp edges.

Mounting And Fit Characteristics For This Pull

This 128 mm center to center pull uses its specified spacing as the critical mounting dimension, so drilling or existing holes must align with 5-1/16 inches between centers for proper fit. The 1-3/16 inch projection defines how far the handle stands off the cabinet face, affecting knuckle clearance and how far the pull extends into the room on tight walkways. With a 1 inch base diameter at each mounting point, the pull covers a modest area around the screw holes, which can help visually mask minor imperfections at the hole edges. The 5/16 inch width keeps the gripping area narrow enough for smaller drawer fronts, yet the 6-9/16 inch length still provides enough span for comfortable use on wider drawer faces.

Using The 9127-10CZ-P Pull In Real Projects

Where This Champagne Cabinet Pull Works Best

The 9127-10CZ-P pull, part of the Advantage Series from Berenson Corporation, is suited to cabinet doors and drawers that use a 5-1/16 inch (128 mm) center to center layout, so it fits projects designed around that metric or imperial spacing. Its champagne finish supports use on contemporary or transitional cabinets where a subdued metallic color coordinates with neutral paints, wood tones, or laminated surfaces supplied by woodworking distributors. The zinc construction fits residential kitchens, baths, and shop casework that see frequent opening and closing, because the metal body handles repeated pulling better than non-metal trim pieces. With an overall length of 6-9/16 inches, the pull works on medium to wider drawers and doors where a short knob would not give as much leverage along the front.

Dimensions That Help Repeatable Installation Results

The defined 128 mm (5-1/16 inch) center to center measurement allows installers to use consistent drilling jigs or templates set to that spacing, speeding layout when multiple doors and drawers require the same hardware. A 1-3/16 inch projection sets a predictable stand-off from the cabinet face, which helps maintain uniform clearance lines when this pull is repeated across a full run of cabinets. The 1 inch base diameter at each end forms a circular footprint that can align neatly along rail or stile edges, making it easier to position the pull visually on both framed and frameless fronts. The slim 5/16 inch width keeps the handle profile tight to the design line of the cabinet, so multiple pulls can be installed in close proximity on narrow drawer stacks without visual bulk. The combination of zinc material and these fixed dimensions gives installers a consistent feel and appearance from one cabinet front to the next.

Common Questions About This 128 mm Cabinet Pull

Selecting This Champagne Pull For Your Cabinets

This champagne cabinet pull from the Advantage Series combines a 5-1/16 inch (128 mm) center to center layout, zinc construction, and a 6-9/16 inch overall length, so it suits projects needing a metal handle at this common spacing. The defined projection, width, and base diameter give predictable clearances and sight lines across a cabinet run. For cabinetry work sourced through Wurth Baer Supply, this Berenson Contemporary Advantage Five pull offers a coordinated option when 9127-10CZ-P dimensions and champagne finish match the planned hardware specification.