Berenson Contemporary Advantage Five Series 3-3/4" (96 mm) Center to Center Champagne Pull, - 9128-10CZ-P

Berenson Contemporary Advantage Five Pull For Cabinets

Berenson Contemporary Advantage Five pull is a cabinet handle from the Advantage Series that uses a 3-3/4 inch (96 mm) center to center design, so it spans common drilling patterns on modern cabinetry and provides a consistent grip position across doors and drawers. The pull is made from zinc, which creates a solid metal body that stands up to regular use on frequently opened fronts in kitchens, baths, and built-ins. Its champagne finish gives a warm metal tone that pairs with many door colors while maintaining a unified look across a run of cabinets. With a total length of 5-1/16 inches, the pull extends slightly beyond the mounting holes, giving fingers more room to grab without crowding adjacent fronts. The piece is part of the Berenson product class for handles and pulls, so it fits into typical decorative hardware layouts where a streamlined pull is preferred.

Key Details That Support Cabinet Hardware Layouts

• The 3-3/4 inch (96 mm) center to center dimension aligns with a standard mounting spread, which simplifies drilling layouts on new cabinet doors and allows consistent spacing across multiple fronts for a uniform run.
• The 5-1/16 inch overall length gives extra bar length beyond the holes, creating more usable grip area so hands can pull doors and drawers open without slipping off the ends.
• The 1-1/16 inch projection sets the handle away from the cabinet face enough for fingers to wrap behind the pull, helping doors open cleanly even when users have larger hands or are wearing light work gloves.
• The 1/4 inch width creates a slim front profile, which helps the pull sit visually light on narrow rails or smaller drawers while still offering enough surface for a comfortable finger pull.
• The 3/4 inch base diameter at each end gives a defined mounting footprint, helping the pull cover the drilled area around each hole and creating a clean, finished look on the door surface.

Mounting Dimensions For The 9128-10CZ-P Pull

The Berenson Corporation 9128-10CZ-P pull uses a 3-3/4 inch (96 mm) center to center mounting dimension, so hole locations can be laid out with a simple linear measurement for straight runs across multiple cabinet faces. Its 5-1/16 inch overall length provides reference points at the ends of the handle that aid in aligning the pull square with door edges during installation. With a projection of 1-1/16 inches, the handle stands off the face enough to avoid knuckles contacting the cabinet surface when pulling, which supports smoother operation on heavier drawers. The 1/4 inch width and 3/4 inch base diameter work together so the pull seats neatly over each mounting point, helping create a uniform reveal where the hardware meets the door or drawer front.

Using This Champagne Cabinet Pull In Projects

Where The Advantage Series Pull Fits Best

This Advantage Series cabinet pull is designed as a handle and pull for decorative hardware applications, so it works on cabinet doors and drawers where a streamlined metal pull is preferred over a knob. The 3-3/4 inch (96 mm) center to center layout fits cabinets drilled on that spread, making it suited for face-frame or frameless projects laid out to that common dimension. Its champagne finish provides a soft metallic look that can coordinate with other champagne decorative hardware in a room, giving banks of cabinets a consistent appearance from one cabinet run to the next. The zinc material supports use on frequently operated fronts, such as kitchen base cabinets or utility storage, where a metal pull must handle repeated opening and closing during everyday routines. With a length of 5-1/16 inches, the handle visually balances mid-size and many larger drawer fronts, helping hardware look proportional to the panel size.

Why These Dimensions Help Day-To-Day Operation

The 96 mm center to center mounting on this Berenson Contemporary Advantage Five pull allows installers to repeat the same drilling pattern along a whole bank of cabinets, which saves layout time and keeps hardware lines straight. A projection of 1-1/16 inches gives enough clearance for fingers to hook behind the pull, reducing contact with finished cabinet surfaces as doors are opened. The 1/4 inch width limits how far the pull extends across narrow rails, helping it sit comfortably even on smaller cabinet faces without overwhelming the design. At each end, the 3/4 inch base diameter offers a defined footprint that covers the area around the mounting points, which supports a tidy appearance where the handle meets painted or stained wood. Combined, these measured details help the 9128-10CZ-P pull function consistently across multiple doors and drawers, supporting smooth access throughout the cabinet installation.

Common Questions About The 9128-10CZ-P Cabinet Pull

Selecting This Champagne Pull For Cabinet Runs

The Berenson Contemporary Advantage Five Series 3-3/4 inch (96 mm) center to center champagne pull gives cabinet projects a defined hardware standard using the 9128-10CZ-P part. Its zinc construction, 5-1/16 inch length, and 1-1/16 inch projection work together to support routine opening of doors and drawers on active cabinet runs. With a champagne finish and measured dimensions that align to common drilling patterns, this handle fits into decorative hardware plans that rely on repeatable layouts. For cabinet work that calls for a streamlined metal pull with a 96 mm spread, this Advantage Series piece provides a consistent choice across multiple fronts.