Berenson Traditional Advantage Four Series 3" (76 mm) Center to Center Champagne Pull, - 9130-10CZ-P
Description
Berenson Traditional Advantage Four Pull For Cabinets
Berenson Traditional Advantage Four pull gives you a 3 inch center to center handle in a champagne finish for cabinet doors and drawers. The pull is part of the Advantage Series from Berenson Corporation, so it fits into a defined decorative hardware family. Its zinc material provides a solid metal handle that withstands everyday cabinet use in kitchens, baths, or shop-built casework. The 5-1/2 inch overall length spans more of the drawer front, which helps fingers find the pull quickly on wider fronts. A 15/16 inch projection creates enough hand clearance from the cabinet face for a comfortable grip. The 5/8 inch width and 5/8 inch base diameter give the handle a consistent look from post to post, helping layouts appear even across multiple fronts.
Key Berenson 3 Inch Pull Details For Projects
- The 3 inch center to center dimension sets exact hole spacing, which streamlines drilling and speeds up repeat layouts across multiple cabinet fronts on a job.
- The 5-1/2 inch overall length creates a balanced look around the 3 inch mounting holes, which helps the pull sit proportionally on doors and small drawers.
- The 15/16 inch projection spaces the grip off the cabinet face, which supports finger clearance and reduces knuckle contact with the door or drawer surface.
- The 5/8 inch base diameter defines the footprint against the cabinet, which helps cover typical bore marks at the posts for a cleaner finished appearance.
- The 5/8 inch width through the grip keeps the pull slender, which works well on lighter cabinet styles where a narrower handle line is preferred.
- The champagne finish adds a muted metal tone, which can coordinate with other champagne-colored Advantage Series hardware on the same project.
Cabinet Pull Dimensions That Guide Installation
This Berenson 9130-10CZ-P pull uses a 3 inch center to center measurement, so hole boring follows that fixed spacing when laying out jigs or CNC programs. Its 5-1/2 inch length determines how far the handle stretches across the stile or drawer front, which matters when aligning with panel rails or neighboring pulls. With a 15/16 inch projection, installers can anticipate how far the pull stands off the face, which affects adjacent clearances on tight drawer stacks. The 5/8 inch width and base diameter keep the contact area compact, so the pull fits comfortably on narrow rails or small drawer fronts while still covering the drilled holes.
Using This Zinc Champagne Cabinet Pull In Work
Where This 3 Inch Center Pull Fits Best
This Berenson Traditional Advantage Four pull fits cabinet doors and drawers that are drilled on a 3 inch center to center layout, which is common on many built-ins and factory cabinets. The 5-1/2 inch overall length works well on standard kitchen cabinet doors and small to mid-size drawers, giving enough bar length for a full hand while staying in scale with the front. Its champagne finish ties into projects that specify champagne decorative hardware, helping keep finishes consistent from doors to drawers. The 5/8 inch base diameter lets the pull sit comfortably on face-frame stiles, slab doors, or narrow drawer rails where a larger base might crowd neighboring edges. Because it is part of the Advantage Series, this pull suits jobs that call out that Berenson collection for a coordinated look across multiple hardware points.
Details That Support Repeatable Cabinet Installations
The fixed 3 inch center to center spacing on the 9130-10CZ-P pull allows installers to reuse standard 3 inch drilling jigs, which saves layout time across a bank of cabinets. Its 15/16 inch projection defines how far the handle stands off the surface, which helps keep lines consistent when multiple pulls are installed side by side on drawer stacks. The 5/8 inch width through the grip keeps the pull slim, which reduces visual clutter when many pulls line up across a large run of cabinets. The 5/8 inch base diameter helps cover slight drilling tear-out at each post, which can reduce touch-up steps on painted or stained fronts. Constructed from zinc, the pull provides a metal feel in hand during regular opening and closing, matching expectations for cabinet hardware in residential and shop-built applications.
Common Questions About This Berenson Cabinet Pull
What is the center to center size of this pull?
The Berenson Traditional Advantage Four pull has a 3 inch center to center dimension, which sets the hole spacing for drilling cabinet doors and drawers.
How long is the Berenson 9130-10CZ-P cabinet pull?
The Berenson 9130-10CZ-P pull has a 5-1/2 inch overall length, so it spans a good portion of standard cabinet doors and small drawers.
What projection does this Advantage Series pull have?
This Advantage Series cabinet hardware pull projects 15/16 inch from the cabinet face, providing hand clearance for gripping the handle.
What is the material and finish of this cabinet pull?
The pull is made from zinc with a champagne finish, giving a metal handle in a champagne tone for coordinating cabinet hardware.
How wide is the grip area on this pull?
The Berenson Traditional Advantage Four pull has a 5/8 inch width, creating a slim grip profile suitable for various cabinet styles.
What is the base diameter where the pull meets the door?
Each post on this pull has a 5/8 inch base diameter, giving a defined footprint that covers typical drill holes on cabinet fronts.
Select This Berenson Pull For 3 Inch Layouts
This Berenson Traditional Advantage Four Series pull brings a 3 inch center to center layout, 5-1/2 inch length, and champagne finish to cabinet projects. With zinc construction, 15/16 inch projection, and 5/8 inch base diameter, it supports consistent, repeatable cabinet hardware installations.