
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Berenson Traditional Advantage Four knob gives cabinets a 1-5/16 inch diameter grip point, creating a consistent hand feel on doors and drawers. The 33 mm size helps installers line up drill locations across a job, supporting repeatable layouts.
The knob is made from zinc, so the body provides a solid metal construction that handles everyday cabinet use in kitchens, baths, or built-ins. Its champagne finish presents a warm, light metallic tone that coordinates with champagne decorative hardware, helping projects maintain a unified look.
The knob has a projection of 1 inch, which sets the working stand-off from the cabinet face. This distance gives fingers clearance behind the knob while keeping the pull point close to the surface, useful on narrow walkways or tight spaces.
An 11/16 inch base diameter defines the footprint where the knob meets the cabinet front, spreading contact over a compact area that suits standard cabinet stile and rail widths.
This Berenson cabinet knob uses an 8-32 screw size, so it aligns with the common threaded interface found on many cabinet fronts and drawer fronts. That thread standard supports straightforward installation with typical cabinet drilling practices.
The 1-5/16 inch width and 1 inch projection define how far the knob extends into the user's reach zone, helping layout decisions where doors open near walls or appliances. With an 11/16 inch base diameter, the contact circle stays compact, fitting comfortably on narrow rails and small drawer fronts.
The combination of zinc construction and champagne finish supports use on decorative cabinet faces where both appearance and daily handling are important.
The 1-5/16 inch diameter Berenson Traditional Advantage Four knob suits cabinet doors and drawers that benefit from a medium-size round grip. In kitchen runs, this diameter gives enough surface area for a secure pull without dominating narrow fronts.
On bathroom vanities, the 1 inch projection keeps the knob close to the cabinet face, which is useful where traffic passes close to the units. The 11/16 inch base diameter lets the knob sit comfortably on face frames, slab fronts, or panel doors without crowding edge profiles.
The champagne finish coordinates with other champagne finish decorative hardware, helping maintain a unified tone across hinges, pulls, and knobs in the same area. As part of the Advantage Series collection, this knob aligns with the series aesthetic, giving designers a way to repeat the same visual language across various cabinet components.
The zinc material supports use on cabinets that see frequent opening, such as pantry doors or main kitchen drawers, where a metal knob is preferred over non-metal options for a more substantial feel.
The defined 1-5/16 inch width and 1 inch projection let installers standardize drilling patterns and clearances across multiple cabinets. Knowing these dimensions ahead of layout work supports evenly spaced hardware lines and predictable user reach.
The 11/16 inch base diameter concentrates the knob's footprint, which helps it sit flat on typical cabinet face constructions. This contact area size works well with standard boring practices, reducing visual distraction around the mounting point.
The 8-32 screw size interface matches a widely used cabinet hardware thread, so fabricators can plan bore diameters and back side clearances around a known fastener relationship. That consistency aids in pre-drilling fronts before finishing or assembly.
The champagne finish provides a specific color and sheen profile that designers can repeat on matching knobs and pulls. This repeatable finish characteristic helps maintain continuity from door to door and across different cabinet sections in the same space.
The knob has a 1-5/16 inch diameter, 1 inch projection, and an 11/16 inch base diameter, so layouts can be planned around its reach and footprint on cabinet faces.
The Berenson 9131-10CZ-P knob is made from zinc, giving it a metal construction that supports daily cabinet use and provides a solid feel when pulled.
The champagne finish provides a warm metallic tone, helping this knob coordinate with other champagne finish cabinet hardware across a kitchen or bath project.
The cabinet knob uses an 8-32 screw size, aligning with a common cabinet hardware thread so drilling and installation follow familiar practices.
This Berenson knob is part of the Advantage Series collection, allowing it to visually coordinate with other Advantage Series decorative hardware pieces.
The 1 inch projection provides finger clearance while keeping the knob close to the cabinet face, which is helpful on cabinets in tighter walkways or compact rooms.
The Berenson Traditional Advantage Four Series champagne knob combines a 1-5/16 inch diameter, 1 inch projection, and 11/16 inch base to give cabinets a practical, repeatable grip point. Zinc construction and a champagne finish support both daily use and coordinated appearance.
For cabinet runs that need a consistent round pull, this Advantage Series knob offers defined dimensions, a common 8-32 screw interface, and a finish that works across kitchens, baths, and built-in storage.
Sold In: 1 Each