
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Berenson Traditional Advantage Four knob gives cabinets a champagne-finished grip that matches Traditional Advantage Four styling, so installers can keep a consistent look across a project. The knob is part of the Advantage Series, which helps tie hardware selections together across a job where that series is specified. Made from zinc, the knob provides a solid metal feel during use, important on frequently used cabinet doors and drawers. The 1-1/8 inch diameter head offers a comfortable fingertip contact area, helping users pull doors open without slipping. A 5/8 inch base diameter steps the knob cleanly down to the door or drawer front, creating a defined footprint that helps visually align hardware across multiple fronts. With a projection of 1 inch, the knob stands off the surface enough for an easy grip while keeping the profile compact in tight kitchen, bath, or casework layouts.
This 1-1/8 inch cabinet knob uses an 8-32 x 1 inch screw size, giving installers a common machine screw thread and length that works with typical cabinet door and drawer front thicknesses. That standard thread helps align with widely used boring setups in shops that already drill for 8-32 hardware. The 1-1/8 inch diameter and 1 inch projection define how far the knob reaches into the working space, which matters when planning clearances near appliance doors or adjacent cabinets. Its 5/8 inch base diameter sets the contact zone on the face panel, useful when marking centerlines so the base lands fully on the finished surface. All dimensions presented together let installers quickly match this knob to design drawings or hardware schedules that call for a 1-1/8 inch head and 1 inch stand-off.
The 1-1/8 inch diameter suits cabinet doors and drawers that need a comfortable grab point without overpowering narrower rails or stiles, which helps maintain proportion in standard kitchen and bath layouts. Because the knob projects 1 inch from the surface, it provides enough clearance for typical adult fingers, a benefit on heavier doors where leverage matters. The champagne finish positions the knob for projects calling for warm metallic tones, so it can be matched to other champagne-finished hardware on the same job. Being part of the Berenson Advantage Series, this knob fits into projects that already specify that series, allowing the same design language to carry across base cabinets, wall cabinets, and built-ins. The zinc material supports frequent hand contact on active cabinets in spaces such as kitchens, vanities, or storage units.
The defined 1-1/8 inch diameter and 5/8 inch base diameter give installers fixed reference sizes when laying out drilling templates, which helps produce straight visual lines of knobs across banks of doors and drawers. The 1 inch projection is a known stand-off that can be accounted for in design, helping avoid interference where doors open near each other or near adjacent components. Using the 8-32 x 1 inch screw size keeps hardware on a common thread standard, simplifying bit selection and tapping operations where machine screws are used. The Advantage Series designation and champagne finish help designers and shops align this knob with other Berenson pieces in the same collection, reducing the chance of mismatched finishes within a room. The zinc construction and defined measurements combine to give predictable handling and appearance from one cabinet to the next on multi-unit runs.
The 9133-10CZ-P knob has a 1-1/8 inch diameter, 5/8 inch base diameter, and 1 inch projection, so installers can plan clearances and layout spacing from those fixed measurements.
The knob is made from zinc with a champagne finish, providing a metal construction and warm metallic tone that can align with other champagne-finished hardware on the project.
This Traditional Advantage Four knob is part of the Advantage Series, so it fits projects that specify that series for a coordinated hardware look.
This cabinet knob uses an 8-32 x 1 inch screw size, giving a common machine screw standard that works with typical cabinet door and drawer front thicknesses.
The Berenson knob has a projection of 1 inch, which sets how far it extends from the cabinet face for hand clearance and nearby door or drawer clearances.
The 1-1/8 inch diameter suits cabinet doors and drawers where a comfortable grip is needed while keeping the knob visually scaled to standard kitchen, bath, or storage fronts.
The Berenson Traditional Advantage Four knob in champagne gives installers a defined 1-1/8 inch diameter, 1 inch projection, and 5/8 inch base diameter to work from when planning layouts. With zinc construction, Advantage Series designation, and an 8-32 x 1 inch screw size, it slots cleanly into cabinet hardware schedules calling for champagne-finished Berenson knobs. For projects needing a consistent, measured cabinet knob in this size and finish, this model provides the documented dimensions and series alignment required for straightforward selection.