Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Berenson Traditional Advantage Four pull gives cabinets a 3 inch center to center mounting layout, which matches a common drilling pattern and supports straightforward handle replacement on existing doors and drawers. The 5-1/4 inch overall length spreads the grip area across more of the front, which helps align the pull visually with wider rails on many cabinet styles. A 1 inch projection sets the handle off the face, creating finger clearance that supports a comfortable grab even on thicker door edges. The 1/2 inch width provides a slim front profile, which keeps the pull from crowding smaller drawer fronts while still presenting a defined grip surface. A 5/8 inch base diameter at each end gives a stable bearing surface against the wood, which helps distribute pull force and supports a solid feel in everyday use. The matte black finish provides a non-reflective appearance that works well in contemporary and traditional kitchens.
The 3 inch center to center measurement sets the exact distance between mounting holes, which lets installers position the pull accurately on jigs or templates when drilling new cabinetry. The 5-1/4 inch overall length defines the end span, which helps in marking consistent setbacks from door edges and aligning multiple pulls along a run of cabinets. A 1 inch projection determines how far the handle stands off the surface, which matters when checking clearance near adjacent walls or trim. The 5/8 inch base diameter supplies the footprint at each end, which can help cover minor existing imperfections around old mounting points. The 1/2 inch width of the pull bar informs both the visual line on the cabinet and the clearance needed between neighboring fronts in tight layouts.
This 3 inch center to center cabinet pull suits doors and drawers drilled on the 3 inch standard, which are common in many kitchen and bath layouts. The Berenson Traditional Advantage Four profile gives a consistent style reference, which helps when matching hardware across multiple cabinet banks in the same space. With a 5-1/4 inch length, the pull spans more of the drawer front, which can visually connect tall doors and shorter drawers when used throughout a room. The matte black finish creates a uniform dark tone across each piece, which supports a coordinated look when repeating multiple pulls on a large run of wall or base cabinets. The pull sits 1 inch off the surface, which helps users grab doors that may carry thicker edge profiles or decorative fronts.
The defined 3 inch center to center dimension gives installers a fixed reference for drilling jigs, which supports repeatable hole placement from cabinet to cabinet. The Berenson 9134-1055-P pull uses a 5-1/4 inch overall length, which provides a stable measuring edge when aligning multiple pulls along a vertical stack of drawers. A 1 inch projection provides predictable standoff, which matters when laying out hardware near appliance panels where clearance is limited. The 5/8 inch base diameter at each end offers a circular reference point, which can be lined up with layout marks for consistent reveal from door edges. The 1/2 inch width defines the face profile, which helps when checking that neighboring pulls on closely spaced drawers will stay visually distinct without overcrowding. The zinc construction and matte black finish together establish a specific material and surface combination, which supports consistent appearance across bulk cabinet hardware orders.
The Berenson Traditional Advantage Four pull has a 3 inch center to center measurement, which sets the spacing between mounting holes for cabinet doors and drawers.
The Berenson 9134-1055-P pull has a 5-1/4 inch overall length, which defines how much of the cabinet front the handle spans from end to end.
This matte black pull projects 1 inch from the cabinet face, which sets the standoff distance and affects finger clearance behind the handle.
The Traditional Advantage Four pull is made from zinc, which defines the base material used for the handle body and its cast profile.
This cabinet pull has a 1/2 inch width and a 5/8 inch base diameter, which determine its front profile and the contact area against the cabinet.
This Berenson cabinet pull features a matte black finish, which provides a dark, low-sheen appearance on cabinet doors and drawers.
The Berenson Traditional Advantage Four pull pairs a 3 inch center to center layout with a 5-1/4 inch length, which fits many standard cabinet drilling patterns while offering broader visual coverage on the front. Its 1 inch projection and 1/2 inch width define a usable grip that stays compact enough for tight drawer configurations. Zinc construction and a matte black finish establish the material and color profile, which simplifies coordinating hardware across a project. For cabinets set up on 3 inch centers and needing a matte black handle with defined dimensions, this pull is a practical match to specify.
