Berenson Transitional Advantage Three Series 2-1/2" (64 mm) Center to Center Champagne Cup Pull, - 9136-10CZ-P
Description
Berenson Transitional Advantage Three Cup Pull Use
Berenson Transitional Advantage Three cup pull is a zinc cabinet handle with a 2-1/2 inch (64 mm) center to center spread that grips the door or drawer at two fixed points, which supports stable alignment in everyday cabinet use. The 3-3/16 inch overall length keeps the pull compact on smaller cabinet fronts while still giving enough finger room across its width for practical access. A 1 inch projection sets the hand away from the cabinet face, helping fingers clear the door surface when opening. The 1-1/16 inch width shapes the cup profile, which provides a defined edge for pulling movement. The champagne finish creates a specific color tone on the zinc material, which gives installers a consistent visual match where that finish is required across a run of cabinets.
Key Advantage Series Details For Cabinet Work
- The Advantage Series collection designation groups this pull with other Berenson pieces, which helps installers keep a coherent style line when they repeat hardware across multiple doors and drawers on the same project.
- The 64 mm center to center dimension defines the mounting hole spacing, which lets installers lay out drilling patterns or reuse existing 64 mm bores during retrofits without changing the door or drawer front layout.
- The 3-3/16 inch length sets the trim footprint on the cabinet face, which matters where rails or stiles are narrow and hardware needs to sit cleanly without crowding neighboring joints or profiles.
- The 1 inch projection fixes how far the pull stands off the surface, which affects hand clearance and also how far the hardware extends into tight walkways or small spaces in built-in cabinetry.
- The 1-1/16 inch width defines the visible cup band on the door or drawer, which gives designers and installers a predictable visual weight when balancing this pull against door panel styles and drawer front proportions.
Mounting Dimensions And Champagne Finish Fit
The 2-1/2 inch (64 mm) center to center measurement on this cup pull sets an exact mounting distance between fasteners, which supports repeatable drilling and straight alignment across rows of cabinet doors or banks of drawers. The projection of 1 inch controls how far the gripping edge stands off the front, which keeps hands from rubbing the cabinet surface during operation. The 3-3/16 inch overall length and 1-1/16 inch width define the footprint, which lets installers position the pull within rail and stile boundaries without interfering with adjacent details. The champagne finish specified for this model sets a defined tone for the visible surface, which supports finish matching wherever other champagne-finished components are present in the same space.
How This 64 mm Cup Pull Works In Projects
Cabinet And Drawer Locations For This Cup Pull
This Berenson Transitional Advantage Three cup pull belongs to the Handles and Pulls category, which places it in standard cabinet and drawer handle applications where a fixed grip is needed. The 2-1/2 inch (64 mm) center to center spacing positions it well on typical residential or light commercial cabinet doors and drawer fronts that accept this drilling pattern. Its 3-3/16 inch overall length makes it suited to smaller or medium fronts where a compact pull is preferred over longer bar hardware, helping maintain proportion on narrow drawers. The 1-1/16 inch width and 1 inch projection define a modest cup shape that works on face-frame and frameless cabinet styles using that footprint. The champagne finish offers a specific color option for projects that call for that tone across multiple pieces of decorative hardware.
Dimensional Details That Support Repeatable Results
The defined 64 mm center to center spacing on this cup pull gives installers a clear drilling target, which supports jig-based or template-based workflows and consistent alignment when hardware is repeated in runs. The 3-3/16 inch overall length limits the hardware to a controlled span on the front, which reduces the chance of the pull bridging decorative profiles or crossing into panel recesses. A 1 inch projection fixes the stand-off from the door, which informs planning around clearances near adjacent cabinetry or walls. The 1-1/16 inch width creates a stable gripping surface, which helps users operate doors and drawers without fingertip strain during frequent use. Because the pull is made from zinc, the base material provides a defined substrate under the champagne finish, which supports a uniform appearance across matching pieces from the same series.
Common Questions About This Berenson Cup Pull
What are the key dimensions of the 9136-10CZ-P cup pull?
The 9136-10CZ-P cup pull has a 2-1/2 inch (64 mm) center to center spacing, 3-3/16 inch overall length, 1 inch projection, and 1-1/16 inch width, which defines its mounting layout and front footprint.
How does the 64 mm center to center help installation?
The 64 mm center to center measurement sets a fixed hole spacing, which lets installers use standard jigs or reuse existing 64 mm holes when placing this cup pull on doors or drawers.
What material is this Berenson Transitional Advantage pull made from?
This Berenson Transitional Advantage pull is made from zinc, which provides a consistent base material for the champagne finish and supports uniform appearance across multiple pulls.
How far does this champagne cup pull project from the cabinet?
This champagne cup pull projects 1 inch from the cabinet face, which establishes hand clearance and how much the hardware extends into the room.
Where is this Advantage Series cup pull typically used?
This Advantage Series cup pull is part of the Handles and Pulls category for decorative hardware and moldings, placing it in cabinet and drawer handle applications using that form factor.
What does the champagne finish contribute to a project?
The champagne finish on this cup pull defines a specific surface color, which helps align hardware appearance wherever a champagne tone is required across matching cabinets.
Selecting This 64 mm Cup Pull For Your Job
The defined 2-1/2 inch (64 mm) center to center layout, 3-3/16 inch overall length, and 1 inch projection give this Berenson Transitional Advantage Three cup pull clear installation and use parameters that suit cabinet and drawer fronts drilled on that spacing. The zinc construction and champagne finish provide a specified material and color combination for projects built around that look. When a compact, 64 mm center to center cup pull from the Advantage Series fits your cabinet plan, this model delivers those exact dimensions and finish for consistent results across the run.