
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Berenson Traditional Advantage Three knob gives cabinets a defined 1-1/4 inch diameter pull point, so doors and drawers can be operated with a clear grip area that suits everyday use in kitchens, baths, or built-ins. The knob is made from zinc, which provides a stable, consistent material body that supports repeatable drilling layouts and predictable feel when installed across multiple fronts. Its champagne finish establishes a specific visual tone, so installers can match this knob to other champagne-finished decorative hardware in the same space. A projection of 1 inch sets the distance the hand stands off the cabinet face, which affects how fingers clear door edges and adjacent fronts during regular operation. The base diameter of 7/16 inch defines the footprint against the door or drawer surface, which helps plan for coverage of existing marks or finish transitions when replacing older knobs.
The Berenson Traditional Advantage Three Series knob is specified with an 8-32 x 1 inch screw size, establishing a thread pattern that aligns with common cabinet hardware tapping expectations. With a 1-1/4 inch diameter head and 1 inch projection, the geometry keeps the hand offset predictably from both doors and drawer fronts, which matters when planning clearance near adjacent hardware, trim, or counters. The 7/16 inch base diameter sets the compression zone against the wood or panel surface, helping installers anticipate how much flat area they need around the drilled hole for full bearing contact. Together, these dimensions provide a predictable interface for through-bored cabinet doors and drawer fronts, supporting streamlined layout on jobs using repeated center drilling.
This knob is part of the Advantage Series from Berenson Corporation, placing it within a decorative hardware line intended for cabinet applications where a coordinated look is important. Its champagne finish provides a defined color reference for matching with other champagne pieces in the same project, such as additional knobs or pulls from Berenson. The 1-1/4 inch diameter and 1 inch projection combine to create a grip area that works for both doors and drawers, so installers can maintain a single knob specification across different cabinet functions. With a 7/16 inch base diameter, the contact area is sized for standard cabinet stile and rail widths, fitting typical residential and light commercial cabinet face dimensions without dominating narrow frames. The zinc material body gives each knob a consistent mass and machining profile, which supports uniform appearance and tactile feel when used in full kitchens or banks of casework.
The defined 1-1/4 inch length or diameter on this Berenson Traditional Advantage Three knob helps installers set up drilling jigs or CNC programs with reliable edge clearances, which is important when repeating the same pattern across many doors and drawers. Its 8-32 x 1 inch screw size matches a standard cabinet hardware thread, allowing use with typical 3/4 inch thick fronts where the threaded engagement and projection have been planned around this length. The 1 inch projection becomes a fixed working dimension, which helps designers and installers anticipate hand clearance from neighboring cabinets, appliances, or wall returns. The 7/16 inch base footprint also matters when swapping out older knobs, because it defines how much of the previous contact ring or finish wear can be covered using the existing drilled hole. As a Berenson Corporation knob within the Advantage Series, it ties into a recognized decorative hardware family, which simplifies future replacements or additions when expanding a run of cabinets. The stated width of 1-1/4 inch confirms its round plan view, so orientation does not change the way it meets the hand, reducing install time when multiple knobs are being fitted in succession.
The knob has a 1-1/4 inch length or diameter, a 1 inch projection, and a 7/16 inch base diameter, which defines the grip size, standoff, and contact area on the cabinet face.
The 8-32 x 1 inch screw size aligns with standard cabinet hardware threads, so through-bored 3/4 inch doors and drawer fronts accept this knob using familiar drilling and tightening methods.
The knob is made from zinc, providing a consistent metal body that supports uniform machining, finish application, and feel across multiple installed pieces.
The knob has a champagne finish, giving a specific color tone that can coordinate with other champagne decorative hardware in the same project.
This knob is part of the Advantage Series, positioning it within a Berenson decorative hardware family used to create coordinated cabinet looks.
The manufacturer part number is 9169-10CZ-P, which uniquely identifies this Traditional Advantage Three Series champagne knob for ordering and reordering.
The Berenson Traditional Advantage Three Series champagne knob, part number 9169-10CZ-P, offers a defined 1-1/4 inch diameter, 1 inch projection, and 7/16 inch base diameter that align with standard cabinet layouts. Its zinc construction, champagne finish, and 8-32 x 1 inch screw specification together give installers a predictable, repeatable hardware choice for new cabinets or straightforward replacements. For projects built around champagne decorative hardware with consistent feel across all fronts, this Advantage Series knob provides a single, clearly specified option at Wurth Baer Supply.