Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Berenson Traditional Advantage One knob gives a cabinet or furniture door a simple round pull point that suits traditional layouts. The 1-1/8 inch diameter face provides a comfortable gripping surface, so doors and drawers open with a controlled hand feel. The knob is made from zinc, which creates a solid metal piece that resists everyday handling in busy kitchens or shop-built installations. A champagne finish covers the knob, bringing a warm, muted tone that works well where a softer metal look is preferred. The 5/8 inch base diameter steps the knob down to the door face, so it seats with a defined footprint against wood or laminate surfaces. With a projection of 3/4 inch, the knob stands off the surface enough for fingers to reach behind without the pull feeling overextended on narrow doors.
The knob uses an 8-32 x 1 inch screw size, so it mounts through a standard cabinet door or drawer front using a familiar thread. The 1-1/8 inch overall width and 3/4 inch projection define how far the knob reaches into the user space, which helps plan spacing near adjacent doors or wall edges. A 5/8 inch base diameter keeps the contact ring tight to the surface, which can be useful when laying out multiple knobs along a rail or narrow drawer banks. With its zinc construction and champagne finish, the knob is suited to projects where a metal pull with a softer color tone is preferred.
This 1-1/8 inch diameter cabinet knob fits well on cabinet doors and drawers that benefit from a round, centered pull point rather than a longer handle. The round zinc body offers a familiar hand feel for residential kitchens, baths, and built-ins, so users get consistent grip from cabinet to cabinet. On shop-built casework, the 1-1/8 inch width provides enough presence on medium-size fronts without overwhelming smaller faces. The champagne finish pairs with other warm-toned metals, so it can visually tie together hinges, latches, and other decorative hardware in the same color family. Because the knob face and base are proportioned, it presents a clean look on both framed and frameless cabinet designs where hardware alignment is important across multiple doors.
The combination of a 1-1/8 inch face and 3/4 inch projection gives installers predictable clearance between the knob and door edge, which helps maintain straight visual lines across a run of cabinets. The 5/8 inch base diameter defines a clear landing point for drilling, so layout marks can be centered reliably on rails or stiles. Using the 8-32 x 1 inch screw size ties installation to a common fastener standard, simplifying field work when swapping or adding knobs with the same thread. Zinc construction keeps each knob uniformly weighted, which helps doors and drawers feel consistent when opened across a project. The champagne finish presents a unified appearance on every knob of this part number, helping finished cabinetry maintain a coordinated look from one elevation to the next.
The Berenson 9347-10CZ-P knob has a 1-1/8 inch diameter face, giving enough surface area for a comfortable grip on cabinet doors and drawers.
The knob has a 3/4 inch projection, which positions the pull slightly off the door surface to allow fingers to get behind it without excessive stand-off.
The Berenson Traditional Advantage One knob uses an 8-32 x 1 inch screw size, aligning with a standard cabinet knob mounting thread for straightforward installation.
The Traditional Advantage One Series knob is made from zinc, providing a metal construction suited to frequent use on cabinet doors and drawers.
This 1-1/8 inch Berenson knob has a champagne finish, giving a warm metallic tone that coordinates with similar soft metal hardware.
The cabinet knob has a 5/8 inch base diameter, creating a compact footprint against the door or drawer surface for a neat, proportional look.
The Berenson Traditional Advantage One knob in champagne combines a 1-1/8 inch diameter face, zinc construction, and 3/4 inch projection to give cabinets a reliable round pull. For projects calling for a warm metallic finish with traditional proportions, this part number provides consistent dimensions, a defined 5/8 inch base diameter, and a standard 8-32 x 1 inch screw size for through-bore mounting. Add it wherever a compact, metal knob suits the design and day-to-day cabinet use.
Sold In: 1 Each
