Berenson Steel Series 6-5/16" (160 mm) Center to Center Polished Chrome Pull, - 9519-2026-P

Berenson Steel Pull 160mm Center To Center Use

Berenson steel pull 160mm center to center gives a defined 6-5/16 inch mounting span, so installers can line up drill points accurately on cabinet doors and drawers. The pull is part of the Advantage Series in steel, providing a solid metal grip that feels consistent from job to job. Its polished chrome finish reflects surrounding surfaces, helping this handle visually coordinate with other chrome decorative hardware on the project. An overall length of 8-11/16 inches provides hand clearance across wider drawer fronts, while still leaving room near the edges for other layout elements. The 1/2 inch width offers a comfortable gripping surface without crowding tight face frame spacing. A base diameter of 3/8 inch defines the footprint at each contact point, which matters when working close to panel edges or decorative profiles. The 1-1/4 inch projection sets the standoff from the cabinet face, creating finger clearance while controlling how far the handle extends into walk paths.

Key Advantage Series Pull Details In Practice

• The 6-19/64 inch center to center dimension defines exact hole spacing, which supports consistent drilling patterns when repeating this pull across a full kitchen or bank of casework.
• Steel material builds a rigid handle structure, which helps the pull stay stable under repeated opening and closing on heavy drawers and frequently used cabinet doors.
• The polished chrome finish creates a reflective surface, which helps this pull visually match other polished chrome decorative hardware elements on cabinets and furniture.
• An 8-11/16 inch overall length gives extended hand contact area, which can make it easier to operate wider drawers or doors with a single centered pull.
• A 1/2 inch width defines a slim front profile, which is helpful where clearances near adjacent doors, trim details, or appliance fronts are tight.
• The 1-1/4 inch projection creates working finger space behind the pull, which allows a secure grip without pulling the handle too far out from the cabinet face.

Mounting Dimensions And Handle Fit On Cabinets

The 6-5/16 inch, or 160 mm, center to center span on this Berenson Corporation pull controls where mounting points land on doors and drawers, which simplifies layout when using a drilling template. The specified 6-19/64 inch center to center dimension provides precise metric and fractional reference, helping installers position this handle on both European and framed cabinet systems. With an 8-11/16 inch total length, the pull extends beyond the mounting holes, giving a balanced appearance on medium and large fronts. A 3/8 inch base diameter at each end means the contact area stays compact, so the pull can be positioned near panel edges or narrow rails without overlapping into adjacent details. The 1-1/4 inch projection keeps the gripping surface away from the cabinet face enough for fingers to wrap behind, which supports smooth operation on deeper drawers and tall pantry doors.

Advantage Series Pull Use On Cabinet Projects

Where This Steel Cabinet Pull Works Best

This Berenson Steel Series pull in polished chrome fits decorative hardware layouts where a 160 mm, or 6-5/16 inch, center to center dimension is required, supporting standardized drilling on new cabinets. The pull belongs to the Advantage Series, placing it within a coordinated group of handles and pulls that share a design language, which helps create visual continuity across multiple cabinet runs. Its 8-11/16 inch length makes it well suited to medium-width and wider doors or drawers, where additional handle span helps spread hand contact. The 1/2 inch width and 3/8 inch base diameter keep the pull visually light, which can be useful on modern fronts or narrow rails where oversized hardware would dominate the face. With a 1-1/4 inch projection, the handle stands off enough from the cabinet surface to clear typical door edge treatments while keeping the profile controlled in tight walk areas.

Details That Support Repeatable Hardware Results

The clearly stated 6-19/64 inch center to center dimension on this Berenson 9519-2026-P cabinet pull gives installers a single reference for both metric and fractional layouts, which helps align routing or drilling jigs for repeat runs. Steel construction keeps the pull body consistent from piece to piece, supporting uniform feel when several handles are mounted on the same elevation. The polished chrome finish from Berenson Corporation defines a specific surface appearance, which matters when matching other polished chrome hinges, knobs, or plumbing fixtures in a space. By combining an 8-11/16 inch overall length with a 1-1/4 inch projection, the pull presents a proportional look on tall or wide fronts while still allowing easy grasp from different angles. The 1/2 inch width and compact 3/8 inch base diameter give predictable contact points against the cabinet, which is helpful when aligning multiple pulls so that sightlines across doors and drawers remain straight.

Common Questions About This Berenson Steel Pull

Selecting This Pull For Cabinet Hardware Runs

This Berenson steel cabinet pull with 160 mm, or 6-5/16 inch, center to center spacing offers defined dimensions that align with cabinet hardware layouts on doors and drawers. At Wurth Baer Supply, the Advantage Series polished chrome pull profile, 8-11/16 inch length, 1/2 inch width, 3/8 inch base diameter, and 1-1/4 inch projection give installers a clear, repeatable hardware choice for coordinated cabinet projects.