Sheet Metal Spacer for Recessed Pulls from Sugatsune America provides a dedicated spacer between the recessed pull and the mounting surface, which helps establish a consistent pull position across multiple doors or panels. The spacer is identified as BSP-8, giving you a precise reference when matching to project specs or reordering. The SAP description lists this part as BSP RECESSED PULL 12MM LONG CHROME, so you get a spacer with a defined 12mm length that sets the pull depth off the sheet material. The Web Description notes it is a Sheet Metal Spacer for SD/UTZ/HH Series Recessed Pulls, so it is designed around those pull families for repeatable alignment. The chrome finish on this spacer matches chrome recessed pulls in the same hardware run, which helps keep a uniform look across the installation.
This Sheet Metal Spacer for Recessed Pulls sits between the recessed pull face and the underlying sheet metal or comparable material, so it defines the stand-off distance created by the 12mm length. With the part labeled BSP-8, installers can call out the exact spacer on drawings or material lists and match it to SD, UTZ, or HH Series recessed pulls noted in the Web Description. The chrome finish identified in the SAP description lets the spacer blend into chrome pull layouts where edges may be exposed around cutouts. Because it is dedicated as a sheet metal spacer, it is suited to applications where the base material is relatively thin and benefits from added thickness behind the pull body to support fastener clamping and pull operation.
The Web Description defines this as a Sheet Metal Spacer for SD/UTZ/HH Series Recessed Pulls, so it is intended for use wherever those Sugatsune recessed pulls are installed into sheet metal or similar stock. On panels using SD Series pulls, this spacer gives a dedicated 12mm long chrome interface behind the pull as stated in the SAP description, helping to set a consistent recess depth. On UTZ Series recessed pull layouts, using the same BSP-8 spacer keeps the relationship between the pull face and door or drawer surface consistent from opening to opening. For HH Series recessed pulls, the sheet metal spacer acts as a stable backing piece against the panel cutout, which supports the pull body in thin material conditions.
The manufacturer part number BSP-8 uniquely identifies this sheet metal spacer, which matters when a project standardizes around SD, UTZ, or HH Series recessed pulls and needs repeat ordering without guesswork. The SAP description BSP RECESSED PULL 12MM LONG CHROME confirms both the 12mm length and chrome finish, so designers and builders can factor that stand-off dimension and color into hardware schedules. The fact that it is defined as a Sheet Metal Spacer for Recessed Pulls means it is purpose-built to occupy the space between the pull flange and thin sheet material, so the pull seats properly against a firmer bearing surface. Tying the spacer directly to Sugatsune America and to SD/UTZ/HH Series recessed pulls lets hardware planners treat it as part of a coordinated system, which supports consistent appearance and predictable pull feel across the entire bank of doors or drawers.
The BSP-8 Sheet Metal Spacer for Recessed Pulls from Sugatsune America is a chrome sheet metal spacer that works with SD, UTZ, and HH Series recessed pulls to set pull position on thin material.
The spacer identified as BSP RECESSED PULL 12MM LONG CHROME establishes a 12mm stand-off behind the recessed pull, which keeps the pull recess depth consistent across multiple panels.
The Sheet Metal Spacer for Recessed Pulls is described for SD, UTZ, and HH Series recessed pulls, so it is dimensioned around those Sugatsune pull families for coordinated installations.
The product is defined as a Sheet Metal Spacer for Recessed Pulls, indicating it is intended to sit between recessed pulls and sheet metal, supporting proper seating on relatively thin substrates.
The SAP description notes a chrome finish, so the spacer visually aligns with chrome recessed pulls, helping maintain a unified appearance in visible hardware runs.
The BSP-8 manufacturer part number uniquely identifies this Sugatsune sheet metal spacer, which supports clear specification, ordering, and matching to SD, UTZ, and HH Series recessed pulls.
The Sheet Metal Spacer for Recessed Pulls labeled BSP-8 gives you a defined 12mm long chrome spacer that aligns with SD, UTZ, and HH Series recessed pulls. Using a spacer described specifically as a Sheet Metal Spacer for Recessed Pulls keeps your layout tied to Sugatsune America hardware standards. When project notes call out BSP RECESSED PULL 12MM LONG CHROME, this part meets that description, so the stand-off and finish match the planned hardware schedule across the job.