Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
DG-BT2 Series glass door knob describes a Sugatsune America knob designed specifically for glass doors, so you get a purpose-built pull instead of adapting standard cabinet hardware. The 32 mm diameter knob size provides a comfortable gripping area, which helps with regular door operation on glass panels. The knob is part of the DG-BT2 Series, so it ties into a defined family of decorative hardware for coordinated installations. Material listed as brass means the knob body uses brass construction, giving a solid feel that suits higher-end glass door projects. The chrome description identifies a chrome finish, which offers a bright, reflective look that pairs well with clear or frosted glass. The product is described as a set, providing matched components for both sides of a glass door to create a functional through-bolt style pull on the panel.
The specified cut out diameter of 1/2 inch defines the hole size required in the glass, which guides drilling or ordering pre-bored glass panels. The glass thickness range of 5/16 inch to 1/2 inch states the panel sizes this knob is intended to work with, so you can align the hardware choice with the actual glass used in doors or display cases. Describing the product as a glass door knob ties its use directly to glass applications rather than wood or metal doors, which keeps selection focused on the correct hardware family. The combination of the 1/2 inch cut out and the stated thickness range gives a clear operational window for where this knob will properly mount on a glass panel.
The SAP description "DG B/B GLASS DOOR KNOB 32MM DIA CH" identifies this knob as a 32 mm diameter chrome knob for glass doors, making it suitable for glass cabinets, small glass doors, or glass display fronts that fall within the supported thickness range. The glass thickness specification of 5/16 inch to 1/2 inch targets common interior glass panel sizes, which helps when selecting hardware for kitchen uppers, bar cabinets, or display cases using those glass dimensions. The 1/2 inch cut out diameter defines the mounting hole through the glass, so any glass supplier or fabricator working to that size can prepare panels ready to accept this knob. Because the knob is described as a glass door knob rather than a generic knob, it aligns specifically with glass panel applications rather than solid wood fronts.
The 32 mm diameter of the knob face offers a predictable hand contact area, which supports consistent grip and operation across multiple doors in a run of glass cabinetry. Material specified as brass ensures the core construction is based on a metal widely used in decorative hardware, helping maintain a solid feel when pulling open heavier glass doors within the stated thickness range. The chrome finish noted in the description provides a uniform surface appearance, allowing installers to maintain visual consistency when using multiple DG-BT2/30-CR units on a single bank of doors. The product being described as a set of knobs, washers, and a tube indicates that the knob system is structured to work as a through-glass assembly, which supports aligned pulls on both sides of the glass for everyday opening and closing.
The DG-BT2 Series glass door knob is identified as a glass door knob, so it is intended for use on glass doors rather than wood or metal fronts.
The Sugatsune DG-BT2/30-CR knob is specified for glass thickness from 5/16 inch to 1/2 inch, which defines the panel range it is designed to mount on.
The DG-BT2 Series knob lists a cut out diameter of 1/2 inch, so a 1/2 inch hole in the glass panel is used for mounting this hardware.
The chrome brass glass door knob has a 32 mm diameter, providing a defined knob face size for visual planning and hand grip.
The DG-BT2 Series knob is described with material as brass, meaning the knob body uses brass construction with a chrome finish appearance.
The product is described as a set of knobs, washers, and a tube, forming a through-glass assembly that aligns pulls on both sides of a glass door.
The Sugatsune DG-BT2/30-CR glass door knob combines a 32 mm diameter chrome-finished brass body with a 1/2 inch cut out requirement and a 5/16 inch to 1/2 inch glass thickness range, giving a clearly defined setup for glass doors. Choosing this DG-BT2 Series glass door knob keeps hardware selection aligned with those dimensions, supporting consistent appearance and operation across glass cabinets and similar installations.
