Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
DG-BT30-CR glass door knob gives glass cabinet doors a defined pull point while keeping the install simple for shop and field work. This Sugatsune DG-BT Series knob is a 1-1/4 inch (32 mm) diameter unit, so it provides a comfortable handhold on smaller glass doors often used in residential or commercial cabinetry where space is tight. The knob is made from brass with a chrome finish, so the installer gets a solid metal component that suits decorative hardware projects where consistent appearance across hardware matters.
This knob is specified for glass door use, so it is suited to projects where drilling glass for a dedicated pull is part of the workflow. The DG-BT30-CR designation ties directly to Sugatsune Americas DG-BT Series, helping shops match part numbers across drawings, order lists, and service work when they repeat a successful glass door detail on multiple jobs.
This DG-BT Series knob is listed with a cut out diameter of 1/2 inch, so glass drilling can be planned around a single, clearly defined hole size that fits standard glass shop processes. The knob is specified for glass thickness from 5/16 inch to 1/2 inch, so it targets a common range of cabinet glass panels, which helps designers and fabricators choose glass within that band without redesigning the pull detail. The note No screws signals that this knob is not relying on separate screw fasteners, so the connection method is centered on the drilled cut out and the components that clamp to the glass, which shapes how the opening is prepared and how the hardware is tightened.
This Sugatsune DG-BT series knob is identified specifically as a glass door knob, so it is oriented to cabinet doors or similar glass panels where a small, centered pull is needed rather than a long handle. The 32 mm diameter size suits doors where a low-profile, fingertip-style grip is expected, which is common in display cases, upper wall cabinets, and lighter-duty glass-front sections. Because the material is brass with a chrome finish, the knob aligns visually with other chrome decorative hardware used on wood or composite cabinets around the glass section, helping designers tie a glass feature into the overall hardware scheme.
The classification under Decorative Hardware and Moldings, Knobs signals that this part is intended for visible, finished surfaces, making it practical for jobs where the hardware detail is part of the presentation, such as retail displays or residential feature cabinets.
The specified 1/2 inch cut out diameter gives glass fabricators and installers a fixed drilling target, which supports consistent hole sizing across multiple doors on the same run. The glass thickness range of 5/16 inch to 1/2 inch defines the band where the clamping arrangement of the DG-BT series knob is intended to work, which simplifies coordination between the person ordering glass and the person installing hardware. The No screws note directs attention to the way the knob secures through the glass opening using its own parts, so installers can plan tightening from the accessible side without hunting for separate screw sizes.
The manufacturer part number DG-BT30-CR and the SAP description DG GLASS DOOR KNOB 32MM DIA CHROME give shops and service crews clear identifiers to call out on drawings, job packets, and re-order lists, which reduces confusion when matching existing glass doors or expanding an installation later with the same knob style and size.
The DG-BT30-CR knob is described as a glass door knob, so it is intended for use on glass cabinet doors or similar glass panels in decorative hardware applications.
The DG-BT Series DG-BT30-CR knob lists a 1/2 inch cut out diameter, which sets the drilling size needed in the glass for mounting this knob securely.
The DG-BT30-CR glass door knob is specified for glass thickness from 5/16 inch to 1/2 inch, aligning it with common cabinet and display glass panel thicknesses.
The Sugatsune DG-BT30-CR knob has a diameter of 1-1/4 inch, or 32 mm, which defines its footprint and grip area on the glass door surface.
The DG-BT Series DG-BT30-CR knob is described as chrome and specified with material brass, giving a metal knob with a chrome-finished appearance for decorative projects.
The DG-BT30-CR listing notes No screws, indicating the mounting approach relies on its own clamping components through the glass cut out rather than separate screw fasteners.
The DG-BT30-CR glass door knob brings a 32 mm diameter chrome-on-brass pull to glass cabinet doors, using a 1/2 inch cut out and fitting glass from 5/16 inch to 1/2 inch, which aligns well with common cabinet glass specs. With its DG-BT Series and Sugatsune America identification, this knob fits into decorative hardware plans that call for consistent, repeatable glass door detailing. For projects that depend on clear dimensions and defined glass thickness ranges, this knob offers a straightforward spec to build around.