Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
DG GLASS DOOR KNOB 40MM DIA SATIN CHR is a 1-9/16 inch (40 mm) diameter knob designed specifically for glass doors, so it gives glass panels a dedicated gripping point without altering the surrounding frame. The knob is part of the Sugatsune DG-BT Series, which defines its style and sizing for consistent use across a project. Its satin chrome finish provides a controlled, matte look that helps fingerprints stand out less on the gripping surface during regular use. The knob is made from brass, giving the installer a solid base material that supports repeated operation on cabinet or small glass door applications. This DG-BT40-SC knob uses a 1/2 inch cut out diameter in the glass, which sets a clear drilling size when preparing panels in the shop. It fits glass thickness from 5/16 inch to 1/2 inch, so a single reference range covers typical glass door stock.
This Sugatsune DG-BT Series glass door knob uses a 1/2 inch cut out diameter, so the hole in the glass can be laid out and machined before hardware selection steps on site. The specified glass thickness range of 5/16 inch to 1/2 inch defines which glass panels can accept the DG-BT40-SC knob without changing the core drilling detail. With a 40 mm diameter knob body, the installer gains a predictable outside footprint when laying out knob spacing near door edges or adjacent hardware. The satin chrome finish on the brass body coordinates with satin chrome decorative hardware, which lets the knob visually align with other components on cabinets or display cases. Sold as a set, this knob assembly is configured for glass door use where a through-glass mounting layout is planned in the shop drawing.
The Sugatsune DG-BT Series DG-BT40-SC glass door knob is specified for glass doors that accept a 1/2 inch cut out, so it aligns with panels drilled or machined to that diameter. Its 5/16 inch to 1/2 inch glass thickness capacity suits glass door constructions within that defined range, covering many cabinet and display door panels built from common thicknesses. The 40 mm diameter face of the knob works on doors where a moderate footprint is required, giving enough surface for the hand without oversizing the hardware on smaller glass fronts. With satin chrome on a brass body, the knob coordinates well in installations that already use satin chrome decorative hardware from the same or similar lines. The DG GLASS DOOR KNOB 40MM DIA SATIN CHR description ties this model directly to glass door service, keeping its application centered on those openings.
The DG-BT40-SC glass door knob uses the fixed 1/2 inch cut out diameter, so repeated panels can be drilled to a single tooling setup and then matched to this knob for consistent alignment along a run of doors. Allowing 5/16 inch to 1/2 inch glass thickness means one specified knob can follow a standard glass schedule while keeping the same drilling size, which simplifies drawing notes and fabrication instructions. The 1-9/16 inch (40 mm) knob diameter sets a standard distance from door edges or adjacent hardware when laying out multiple knobs on wide glass doors. Brass as the base material supports a solid feel each time the knob is gripped, which matters on high-touch glass doors in display and cabinet environments. The satin chrome finish across the DG-BT Series lets this DG-BT40-SC model visually align when used together with other satin chrome components from Sugatsune America on the same project.
The DG-BT40-SC glass door knob supports glass thickness from 5/16 inch to 1/2 inch, so it covers a defined range of common cabinet and display door glass sizes in one model.
The DG-BT40-SC knob uses a 1/2 inch cut out diameter, allowing fabricators to drill or machine a consistent hole size across all glass doors specified for this hardware.
The DG-BT40-SC has a 1-9/16 inch, or 40 mm, diameter, giving users a moderate gripping surface that suits many glass cabinet and display doors.
The DG-BT40-SC glass door knob is made from brass, providing a metal body that supports repeated pulling and pushing on glass doors in regular service.
The DG-BT40-SC uses a satin chrome finish, allowing the knob to align visually with other satin chrome decorative hardware on the same installation.
The DG-BT40-SC is described as a DG GLASS DOOR KNOB with a specified 1/2 inch cut out and 5/16 inch to 1/2 inch glass thickness range, centering it on glass door applications.
The Sugatsune DG-BT Series DG-BT40-SC leverages a 1/2 inch cut out diameter and 5/16 inch to 1/2 inch glass thickness range to align cleanly with planned glass door layouts. Its 40 mm brass knob body in satin chrome suits decorative hardware programs that require a defined footprint and finish match on glass fronts. With DG GLASS DOOR KNOB 40MM DIA SATIN CHR specifications spelled out, this model fits projects that rely on repeatable drilling, consistent hardware appearance, and brass-based construction for everyday glass door use.