Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Sugatsune kit is the single-handle mounting kit for the DSI-4400-15 door pull, designed for wood, metal, and glass door installations.
A single-handle installation places one pull on one face of the door, anchored through the door thickness on that side only. The hardware required for that configuration differs from what a back-to-back installation demands, which is why those kits are sold separately. This kit covers the single-handle scenario for the DSI-4400-15 pull across wood, metal, and glass door constructions. If the project calls for matching pulls on both faces of the door through-bolted to each other, a back-to-back kit for the DSI-4400-15 is the correct item to source instead.
The substrate this kit covers is wood, metal, and glass. Those three are grouped into one kit type because they share a mounting approach. Concrete is a different substrate that requires a separate kit type in this range. Beyond substrate, the pull designation itself matters: the DSI-4400-15 and other DSI series or size variants are not interchangeable, and each takes its own kit. The size suffix is part of the designation, not an optional qualifier, so a DSI-4400 at a different length takes a different kit.
This kit suits a contractor, designer, or installer fitting a single DSI-4400-15 pull to a wood, metal, or glass door. It is the right choice when one pull face is needed, the substrate is one of the three covered types, and the pull designation has been confirmed as DSI-4400-15. The pull itself is a separate item and is not included. Confirm the full pull designation against your project specification before ordering, because pulling the wrong kit for a similar-looking designation creates a delay the job does not need.
No. This kit is specified for the DSI-4400-15. Other sizes in the DSI-4400 range take their own kits, and the size suffix is part of the designation that determines fit.
No. This item is the mounting kit only. The DSI-4400-15 pull is a separate item.
No. Back-to-back installations require the back-to-back mounting kit for the DSI-4400-15, which is a separate item.
No. This kit is for wood, metal, and glass doors. A concrete substrate takes a different kit in the same range.
When the project specifies a single DSI-4400-15 pull on a wood, metal, or glass door, this kit provides the dedicated mounting hardware for that configuration.
