DLB HANDLE 96MM C/C POLISHED BRASS describes a Sugatsune DLB Series brass handle designed as a decorative and functional pull for cabinet doors and drawers. The handle is part of the Contemporary collection, so its styling supports modern and transitional casework where clean hardware lines are preferred. The length of 4 inches, or 102 mm, keeps the pull compact on smaller doors while still providing enough grip area for comfortable everyday operation. A center to center dimension of 3-3/4 inches, or 96 mm, defines the mounting hole spacing, which matters when aligning with existing boring patterns on cabinetry. The handle uses brass as the material, which provides a solid feel in hand during repeated opening and closing. A polished brass finish creates a bright metallic appearance, giving cabinet faces a defined visual accent in residential or commercial woodworking projects.
The stated center to center dimension of 3-3/4 inches, or 96 mm, defines the distance between mounting points, which is important when locating or drilling handle holes on cabinet faces. A total length of 4 inches, or 102 mm, keeps the pull close to the mounting footprint, which helps when spacing multiple handles on smaller drawer fronts. The width of 1/2 inch, or 13 mm, gives a slim profile across the front, helping maintain a clean look on contemporary casework. A projection of 1-1/16 inches, or 27 mm, provides stand-off from the door or drawer surface, giving fingers space to wrap behind the pull during operation. These dimensions together guide layout, boring, and handle placement work during cabinet installation or retrofit projects.
This Sugatsune America handle is categorized under Decorative Hardware & Moldings and further under Handles and Pulls, showing its role as both a visual and functional component in cabinetry. As part of the Sugatsune Handles and Pulls product class, it is intended for use as a standard cabinet pull within woodworking projects. The polished brass finish allows the handle to serve as a highlight on cabinet doors and drawers, helping define sightlines across kitchen, bath, or built-in casework. Its 4 inch overall length and 3-3/4 inch, or 96 mm, center to center spacing suit cabinets that are bored to common metric or imperial handle layouts. The compact width of 1/2 inch lets this pull sit neatly on narrow rails or drawer fronts while still offering a visual presence. Together, these characteristics position the DLB-96/PB as a practical choice wherever a contemporary brass pull is desired on wood or similar cabinet fronts.
The center to center measurement of 96 mm gives installers a clear, repeatable drilling pattern, which helps maintain consistent alignment across banks of doors or drawers. Because the handle length of 4 inches closely follows this spacing, the ends of the pull sit near the mounting points, giving a balanced look that is easy to reproduce from cabinet to cabinet. The 1-1/16 inch projection defines how far the grip stands off the surface, which is important when accounting for finger clearance against surrounding faces or adjacent hardware. A width of 1/2 inch sets a predictable bearing surface, helping layout lines stay simple during marking and boring. The combination of brass material with a polished brass finish means the handle presents a unified brass appearance, making it straightforward to coordinate multiple pulls on one project under the same visual standard.
The Sugatsune DLB-96/PB handle has a center to center measurement of 3-3/4 inches, or 96 mm, which sets the drilling pattern for cabinet door and drawer mounting.
The handle length is 4 inches, or 102 mm, so it stays compact on smaller fronts while still providing a defined gripping area.
The DLB-96/PB handle is made of brass with a polished brass finish, giving a solid metal feel along with a bright, reflective appearance on cabinet faces.
The handle projection is 1-1/16 inches, or 27 mm, providing space behind the pull for fingers during normal opening and closing.
The handle width is 1/2 inch, or 13 mm, which creates a slim front profile suitable for contemporary cabinet designs.
This handle is identified by manufacturer part number DLB-96/PB and SAP description DLB HANDLE 96MM C/C POLISHED BRASS, helping match it across projects.
The Sugatsune DLB Series 3-3/4 inch, or 96 mm, center to center polished brass pull combines defined dimensions with a contemporary brass appearance, supporting consistent layout across cabinet runs. Its 4 inch overall length, 1/2 inch width, and 1-1/16 inch projection give clear sizing when planning boring and handle placement on new or retrofit casework. The brass material with polished brass finish provides a unified look wherever a bright brass handle is specified. For projects that call for a compact, contemporary brass pull under a known Sugatsune part number, the DLB-96/PB offers a clearly defined option.