Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Sugatsune DSI-110 is a contemporary bar pull for cabinet doors and drawer fronts, offered here at the 3-3/4 inch (96 mm) center-to-center spacing that fits the most widely used hole pattern in residential and commercial cabinetry.
Three-and-three-quarter inch center-to-center is the default hole pattern on a significant share of stock and semi-custom cabinetry. When a renovation, a drawer-front swap, or a hardware refresh starts from existing holes, this spacing is the one that most often lets the buyer skip the drill entirely. The DSI-110 at 96 mm is the right choice for projects where matching the existing layout is the priority and where the hardware should upgrade the look without changing the cabinet structure. It also works as the base spacing for new installations in kitchens, bath vanities, and built-ins where a unified, disciplined hardware program is the goal.
Sugatsune finishes the DSI-110 in Satin Stainless Steel, a brushed surface that keeps the metallic character of stainless without the mirror-bright reflectivity of a polished version. On a square-section bar this matters practically: the flat brushed face stays readable as a line against light or dark cabinet fronts, and surface marks wipe away without leaving evidence the way a polished finish does. The wide grip cross-section, at 1-9/16 inches in both width and projection, gives the pull its mass and makes it feel more substantial than a slim bar at the same spacing. That proportion is consistent with Sugatsune's approach to architectural-grade cabinet hardware throughout the DSI-110 series.
This pull fits a contemporary kitchen, bath, or office built-in where the cabinetry is flat-fronted and the hardware program is stainless or silver-toned throughout. Cabinet shops specifying hardware for slab-door programs will find the 96 mm spacing covers the widest ground on standard base and upper doors. Designers assembling a full hardware specification can use the DSI-110 series at 96 mm on mid-size drawers and coordinate larger center-to-center sizes from the same series on wider drawer banks and appliance panels, keeping the finish and profile consistent across the whole installation. The satin surface also holds up well in high-traffic kitchens and commercial-adjacent environments where polished hardware would show use quickly.
The projection is 1-9/16 inches (40 mm) from the door face to the back of the grip, which is generous enough for a comfortable four-finger hold.
Yes. The nominal 96 mm spacing and 3-3/4 inch spacing refer to the same standard hole pattern and are used interchangeably in the trade.
Yes. The DSI-110 series is available in multiple center-to-center sizes for larger drawers and appliance-scale fronts, all sharing the same profile and Satin Stainless Steel finish.
Both are cool-toned brushed metals and read similarly in a room, but finish names from different manufacturers are not guaranteed to match exactly. View both in person if a precise match is needed.
When the project calls for 96 mm centers and the hardware should be a squared stainless bar that holds its finish through daily use, the DSI-110 at 3-3/4 inch center-to-center is a direct answer.