Sugatsune DSI-3310 13-3/4" (350 mm) Center to Center Satin Stainless Steel Exterior Mount Door Pull, DSI-3310-30-35E

DSI-3310 Exterior Door Handle For Interior Or Exterior

DSI-3310 exterior door handle gives you a 13-3/4 inch (350 mm) center to center pull that spans wider doors, which helps spread hand contact and makes the door easier to operate on heavier panels. This handle is part of the DSI 3310 Series, so it follows a consistent geometry that suits coordinated projects where multiple doors need the same visual line. Material is 304 stainless steel, which resists everyday corrosion in normal interior and exterior environments, supporting long-term use on entry or service doors. The satin stainless steel finish softens reflections, which helps fingerprints read less and keeps the pull looking uniform under varied lighting. Designed for use with DSI mounting kits (sold separately), the handle works within the DSI system so installers can match mount type to door construction while keeping the same visible hardware.

Key Door Pull Details That Support The Job

• The 350 mm center to center dimension spaces the posts for a comfortable grip span, which helps users get a solid pull on tall or wide doors without crowding their hand.
• 304 stainless steel construction provides a solid feel while resisting rust in typical interior and exterior service, which supports long-term appearance on frequently used openings.
• The satin stainless steel finish diffuses light and reduces glare, which helps the handle visually blend with other brushed stainless components on the project.
• Exterior handle posts are threaded to accept screws, which lets the handle tie positively into the DSI mounting kits for a secure exterior-side connection.
• Interior handle posts use set screws for DSI mounting kits, which allows the interior side to clamp to the mounting studs for a clean, finished look on the room side.

Mounting Approach For DSI Door Handle Series

This DSI 3310 Series door pull is designed for use with DSI mounting kits (sold separately), so the mounting method centers on that system rather than loose, ad-hoc fasteners. The exterior handle posts are threaded to accept screws, which allows the screws from the DSI kit to draw the exterior pull firmly against the door face. On the room side, the interior handle posts are configured with set screws for DSI mounting kits, so the interior pull locks onto the kit hardware without exposed through-bolts. This setup creates a two-sided assembly that connects through the door using parts from the mounting kit, giving a consistent approach across doors built in the same program.

Using This Sugatsune DSI-3310 Handle In Real Projects

Where This 304 Stainless Door Pull Fits Best

The Sugatsune America DSI-3310 Series door pull works in projects that call for a 350 mm center to center handle in satin stainless steel, such as doors where a longer grip line improves leverage. Because the material is 304 stainless steel, the handle suits interior or exterior type use in typical woodworking and architectural settings where metal hardware is exposed to handling and ambient conditions. The satin finish coordinates with other brushed stainless items, so it fits well on doors near stainless hinges, stops, or other decorative hardware. Being part of the DSI 3310 Series, this pull fits into layouts where multiple doors share the same handle model for a unified appearance across a bank of cabinets or architectural doors.

Details That Support Repeatable DSI Mounting Results

The posts for exterior handles are threaded to accept screws, which lets installers drive the DSI mounting kit screws directly into the pull posts for a positive mechanical connection on the outside face. This threaded interface helps align the pull square to the door surface as the screws are tightened, supporting consistent reveals when multiple doors are hung in a line. On the opposite side, the posts for interior handles have set screws for DSI mounting kits, which means the interior pull clamps onto the mounting hardware instead of relying on visible through-screw heads. That interior-side set screw design helps achieve a cleaner appearance while still tying into the same structural connection through the door core. Used together, the matched post designs on the DSI 3310 Series pull create a repeatable method for assembling pairs of pulls across doors, which simplifies layout when spacing and alignment must match from opening to opening.

Common Questions About The DSI-3310 Door Handle

Select This DSI-3310 Handle For Coordinated Installs

The Sugatsune America DSI-3310 Series 13-3/4 inch (350 mm) center to center satin stainless steel door pull combines 304 stainless construction with a DSI mounting kit based design, giving you a handle suited to interior or exterior type doors in the same project. Threaded exterior posts and interior posts with set screws are tailored for DSI mounting kits, so each opening can use the same reliable mounting approach. For jobs calling for a 350 mm center to center stainless handle in the DSI 3310 Series, this model aligns appearance, material, and mounting method in one part number.