Sliding Glass Pocket Door Handle Stainless Steel 2-3/8"L x 11/16"W - Sugatsune America DSI-4252-12

Sliding Glass Pocket Door Handle For Clean Operation

Sliding Glass Pocket Door Handle describes this Sugatsune America pull designed for sliding glass pocket doors, so it adds a defined gripping point that makes opening and closing the door more controlled in everyday use. The handle has a 2-3/8 inch length, which equals 60mm, giving enough finger contact across the pull for a steady slide without needing a large opening in the glass. The pull measures 11/16 inch wide, so it occupies a narrow footprint on the door surface and keeps the installation area visually minimal. The material is 304 stainless steel, which resists common indoor corrosion sources and supports long-term service in typical interior woodworking applications. The finish is satin, which softens reflections on the stainless steel and helps the handle blend with brushed stainless hardware in the same project.

Key Door Pull Details That Support Daily Use

• The 60mm, or 2-3/8 inch, length provides a defined gripping surface, so the user can reliably catch the edge of the pull when moving the sliding glass pocket door.
• The 11/16 inch width keeps the profile narrow, which helps the handle sit neatly on the glass without demanding excessive space on the stile area.
• 304 stainless steel construction keeps the pull structurally solid and corrosion resistant in standard interior environments, supporting repeat use in cabinetry or door projects.
• The satin finish tones down shine on the stainless surface, which helps the pull coordinate with other satin stainless fittings on the same installation.
• The Sugatsune America DSI-4252-12 designation clearly identifies the part, which supports consistent selection for repeat jobs using the same hardware line.

Door Pull Dimensions And Finish For Straightforward Fit

The 2-3/8 inch (60mm) length defines how much vertical or horizontal space the Sliding Glass Pocket Door Handle occupies on the glass, which helps with laying out the handle location in relation to surrounding frame members. The 11/16 inch width sets the footprint across the glass face, so installers can size the available glass stile area to accept the pull without crowding adjacent hardware. The 304 stainless steel material means the pull keeps its form under normal hand loads, supporting a solid feel when the door is operated. The satin stainless finish establishes the visible surface tone of the pull, allowing it to align with other satin stainless hardware in the same room or cabinet run.

Using This Sugatsune Pocket Door Handle In Projects

Where This Sliding Glass Pocket Door Handle Works

The Sliding Glass Pocket Door Handle functions as a pull point on sliding glass pocket doors, so it gives the user a defined edge to slide the door along its track during regular operation. The 60mm, or 2-3/8 inch, overall length makes the handle suitable where a compact pull is needed on a glass panel, such as narrow door leaves within cabinetry or interior partitions. With an 11/16 inch width, the handle stays narrow on the face of the glass, which supports use where the visible hardware must remain discreet but still functional for gripping. The satin finish on 304 stainless steel helps the handle visually coordinate with satin stainless hinges, pulls, or trim that may appear on connected woodwork or metal framing.

Details That Support Repeatable Door Pull Results

The 304 stainless steel composition of the Sliding Glass Pocket Door Handle provides a stable, corrosion-resistant base material, which supports consistent performance when multiple doors in the same project use this pull. The satin stainless finish is applied across the handle surface, giving each pull a similar sheen that helps create a uniform appearance over several doors. Because the length is specified as 60mm and 2-3/8 inch, installers can lay out handle locations using either metric or imperial measurements and still achieve consistent spacing. The 11/16 inch width defines the lateral space the pull occupies, which helps teams repeat glass drilling or cutout layouts from door to door without adjusting for varying pull sizes.

Common Questions About The DSI-4252-12 Door Pull

Select This Stainless Pocket Door Handle For Precise Projects

The Sliding Glass Pocket Door Handle from Sugatsune America combines a defined 2-3/8 inch (60mm) length, a narrow 11/16 inch width, 304 stainless steel material, and a satin finish, so it suits sliding glass pocket door installations that call for compact, corrosion-resistant, satin stainless pulls.