ES-A401 edge pull 20mm center to center defines a compact tab pull designed for tight, modern cabinet layouts where a full-size handle is not needed. The 20 mm center-to-center drilling keeps hole placement tight, which helps on narrow doors, small drawers, or slender panel edges where space is limited but a defined grip point is still required for reliable opening and closing in daily use.
The back surface-mount edge pull design places the Sugatsune ES-A401 Series pull on the rear face of the door or drawer edge, so the front stays clean while the pull operates from behind. This layout suits minimalist cabinetry or flush panels where visual hardware is kept discreet yet still functional for frequent operation.
The piece is finished in matte antique brass, giving the pull a non-reflective, subdued brass tone that blends into traditional, transitional, or mixed-finish projects. The tab pull format provides a focused grip area at the edge, helping fingers catch and pull consistently even on thinner fronts or flat slab doors.
Constructed from zinc alloy, the pull offers a solid, cast feel useful on cabinet doors and drawers that are used repeatedly throughout the day in kitchens, baths, or built-ins. Sold in both broken and full box quantities, with a discount available for full box orders, it works for single replacements or coordinated multi-opening runs on larger jobs.
The back surface-mount edge pull configuration means the Sugatsune ES-A401 Series pull fastens to the rear surface of the door or drawer edge, keeping fasteners and mounting points on the concealed side. This setup lets the front face stay uninterrupted, which is useful on slab fronts or panels designed for a clean visual line.
The 20 mm center to center spacing informs drilling locations when laying out holes, so installers can mark, drill, and mount consistently across a bank of doors or drawers. The compact 13/16 inch spacing also helps when working on tight rails or narrow stile sections where longer pulls would not fit.
The easy to grip tab projects at the edge, so once the pull is mounted, users can hook fingers from below or the side to operate the door or drawer. The zinc alloy construction supports a solid feel at the edge, which helps the pull respond predictably during repeated daily use.
The Sugatsune ES-A401 Series 13/16 inch (20 mm) center to center tab pull works well on cabinet doors, drawer fronts, and similar panels where an edge-operated pull is preferred over a front-mounted handle. The back surface-mount edge pull design keeps the working hardware at the edge and out of sight from the front, useful on modern slab fronts or built-in cabinetry that prioritizes flat, uninterrupted surfaces while still needing dependable access points.
The matte antique brass finish lets this edge pull sit comfortably in traditional or transitional interiors, where a warm tone is desired without a bright sheen. Installers can align this finish with other antique brass elements in the room so the hardware field reads consistent from cabinet to cabinet.
Because the tab is described as easy to grip, it provides a deliberate landing point for fingertips at the door or drawer edge, which is valuable on smooth painted, stained, or laminated fronts where there is no profile to catch. The zinc alloy material supports this function with a robust feel in the hand, benefiting high-use areas such as kitchens, bathrooms, or frequently accessed storage runs.
The ES-A401-41/AB part number and ES-A401 EDGE PULL 20MM C/C ANT BRASS description support straightforward specification, especially when multiple trades coordinate hardware schedules. On multi-opening projects, this clarity helps keep pulls consistent from one elevation to the next.
The defined 20 mm center to center measurement lets installers establish repeatable drilling templates for long cabinet runs, helping rows of edge pulls line up cleanly across doors and drawers. That short center span also helps when hardware must be placed close to corners or within tight frame members without crowding adjacent elements.
The back surface-mount edge pull style centralizes all fixing on the rear face, so layout references can be taken from the door or drawer edge and backside surfaces. This arrangement can simplify on-site adjustments because the working references remain the same from panel to panel, reducing the chance of misaligned pulls along a bank of fronts.
The easy to grip tab form adds consistency to the user experience: every door or drawer with the Sugatsune ES-A401 Series pull presents the same edge contact point, so users learn quickly where to reach. Over multiple cabinets, this uniformity supports smoother flow in busy kitchens or work areas where doors and drawers are accessed repeatedly.
The matte antique brass finish also plays a role in repeatability, because the subdued surface helps minor fingerprints or everyday marks present less strongly than on high-gloss metal. Across a larger installation, this can support a tidier appearance between cleanings while preserving the antique brass character of the hardware line.
The Sugatsune ES-A401 Series tab pull has a 13/16 inch (20 mm) center to center dimension, which sets a compact drilling pattern useful on narrow cabinet doors and drawer fronts.
The back surface-mount edge pull design places all mounting on the rear face of the door or drawer edge, keeping the front clean while using the edge as the operating point.
The ES-A401 edge pull is made from zinc alloy, providing a solid, cast feel that suits cabinet doors and drawers used frequently throughout the day.
The ES-A401-41/AB tab pull has a matte antique brass finish, offering a subdued brass tone that works with traditional and transitional cabinet designs.
This back surface-mount edge pull is suited to cabinet doors, drawer fronts, and similar panels where a discrete, edge-operated pull is preferred over front-facing handles.
The ES-A401 edge pull is sold in both broken and full box quantities, with a discount available for full box orders on larger projects.
The Sugatsune ES-A401 Series 13/16 inch (20 mm) center to center matte antique brass tab pull combines a back surface-mount edge pull layout, an easy to grip tab, and zinc alloy construction to support everyday cabinet use. At Wurth Baer Supply, it is offered in both broken and full box quantities with a discount for full box orders, so it works equally well for single-door updates and larger coordinated cabinet runs.