Sugatsune ES-Z001 224mm pull is a zinc handle designed for decorative cabinet and furniture use, giving installers a modern feel that suits contemporary projects. The handle length of 9-13/16 inches (250 mm) spans wider drawer and door fronts, helping visually balance larger faces. A center to center of 8-13/16 inches (224 mm) sets an accurate drilling layout for consistent hole spacing across multiple fronts. The width of 5/16 inch (8 mm) keeps the profile slim, which suits clean-lined casework where hardware should not look bulky. A projection of 1-1/4 inches (32 mm) creates finger clearance for a comfortable grip while staying close to the door, useful on cabinets located in tight corridors or near adjacent surfaces. The white bronze finish supports a modern feel that coordinates with contemporary decorative hardware and moldings.
The 8-13/16 inch (224 mm) center to center dimension establishes precise mounting hole spacing, which supports accurate drilling on door and drawer fronts. The overall handle length of 9-13/16 inches (250 mm) shows how much bar extends beyond the mounting points, helping with placement on narrow or wide panels. A projection of 1-1/4 inches (32 mm) defines how far the handle stands off the surface, affecting clearances near adjacent doors or walls. The 5/16 inch (8 mm) width affects how the pull aligns with stile widths or rail faces, aiding layout decisions on framed and frameless cabinetry. The white bronze finish ties the pull into decorative hardware and moldings, supporting coordinated installations from a single product family.
This Sugatsune ES-Z001 series handle is specified as a pull type handle for decorative hardware and moldings, aligning it with cabinet doors, drawers, and furniture fronts. The 8-13/16 inch (224 mm) center to center suits medium to wide fronts where a longer grip looks proportional to the panel size. With a handle length of 9-13/16 inches (250 mm), the bar covers more of the face, which works well on kitchen base cabinets, tall pantry doors, or wide vanity drawers. The projection of 1-1/4 inches (32 mm) allows fingers to hook behind the pull, supporting repeated daily use on doors and drawers. Its modern feel and white bronze appearance support use on contemporary casework where coordinated metal tones across hardware are important to the finished look.
The precise 224 mm center to center dimension lets installers use standard metric jigs or templates, promoting consistent hole placement from cabinet to cabinet. By matching the 9-13/16 inch (250 mm) handle length to the door or drawer width, the pull can be positioned for balanced sightlines along the run. The 5/16 inch (8 mm) width keeps the handle visually light, which helps when aligning multiple pulls in rows so they do not dominate the front. The 1-1/4 inch (32 mm) projection defines the working stand-off from the surface, guiding decisions about using this pull near corners or next to other doors. The zinc material supports a smooth to the touch surface, which contributes to a comfortable hand feel during frequent operation. The manufacturer part number ES-Z001-224/WB clearly identifies this exact size and white bronze version for repeat jobs or matching existing installations.
The Sugatsune ES-Z001-224/WB is a pull type handle for decorative hardware and moldings, so it functions as a cabinet or furniture handle on doors and drawers.
This handle has an 8-13/16 inch (224 mm) center to center, providing a fixed drilling pattern for consistent hole spacing on cabinet doors and drawers.
The handle length is 9-13/16 inches (250 mm), which determines how much of the cabinet front the pull spans for visual balance and gripping area.
This pull projects 1-1/4 inches (32 mm) from the surface, creating finger clearance while limiting how far it extends into walk paths or tight spaces.
The ES-Z001-224/WB handle is made from zinc, giving it a solid metal construction that supports a smooth to the touch surface during daily use.
This pull is described as having a modern feel with a white bronze look, which suits contemporary decorative hardware and moldings on cabinets and furniture.
The Sugatsune ES-Z001 224mm pull combines a 9-13/16 inch (250 mm) handle length with an 8-13/16 inch (224 mm) center to center, supporting accurate layouts on medium to wide cabinet fronts. Its zinc material and smooth to the touch surface provide a comfortable grip for frequent door and drawer use. The 1-1/4 inch (32 mm) projection and 5/16 inch (8 mm) width keep the profile practical and streamlined. The modern feel and white bronze finish align this handle with contemporary decorative hardware and moldings, making it suitable when a consistent look across a project is important.