Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Sugatsune ES-Z007 pull is a transitional bar pull for cabinet doors and drawer fronts, finished in Matte Antique Brass.
At 7-3/4 inches end to end with a 6-5/16 inch (160 mm) hole spacing, this pull is sized for the larger surfaces in a kitchen or bath: wide base drawers, pantry fronts, and full-height door panels where a smaller pull would look undersized. The flat 1 inch bar keeps the geometry strict, which suits slab and shaker fronts that do not need the hardware to add a curve the door does not already have. Transitional rooms benefit most, where the cabinetry sits between traditional warmth and contemporary restraint and the hardware needs to hold both readings at once.
Matte Antique Brass is not a bright gold and it is not a flat satin. The antique quality comes from a surface that carries tonal variation, so the pull looks as though it has been in the room rather than just installed in it. Against painted fronts in warm whites, creams, or greens, the brass tone deepens the palette without competing with it. Against stained wood, it picks up the grain's warmth and settles into the composition. The matte surface avoids the shine that a polished brass would add, which means it does not become a focal point under direct kitchen lighting. The base material is zinc, finished to the manufacturer's Matte Antique Brass standard for the ES-Z007 series.
This pull suits a specifier or cabinet shop running transitional kitchens where the finish program is warm-toned but not glossy. The 160 mm center-to-center is a standard drilling that most hardware boring machines handle in a single pass on a wide drawer bank, which reduces layout time when the same pull runs across multiple fronts. Homeowners replacing hardware on an existing 6-5/16 inch hole pattern can install this pull without drilling. The ES-Z007 series is Sugatsune's offering in the transitional pull category, and companion pieces in the same series coordinate by sharing the profile geometry and finish name.
A satin brass has an even, brushed surface with a consistent sheen. Matte Antique Brass carries more tonal depth and an aged quality that reads warmer and less uniform than a satin finish.
Squared, at 1 inch wide. The flat face sits flush to the pull's line rather than introducing a curved cross-section.
Companion pieces in the ES-Z007 series share the same profile geometry. Finish coordination between different finish options within the series is a design decision; the hardware shares a profile but each finish is its own surface treatment.
Sizing hardware to roughly one third of the front's width is common design practice. At 7-3/4 inches overall, this pull is frequently specified on fronts in the 18 to 24 inch range, though that is a preference rather than a fixed requirement.
Choose this pull when the hardware program calls for a warm gold tone with depth and restraint, and the drawer or door front is wide enough to carry a 7-3/4 inch bar.