Sugatsune ES-Z008 matte antique copper pull is a decorative handle from Sugatsune America designed for cabinets and similar casework. The center to center dimension is 5-1/16 inches (128 mm), so it aligns with standard 128 mm drilling layouts used on many doors and drawers. The pull has a contemporary rustic finish in matte antique copper, which gives projects a warmer tone than bright metal finishes in visible installations. Its rounded arched pull shape provides a defined gripping area, which helps with consistent opening and closing on frequently used fronts. The material is zinc alloy, so the pull offers a solid metal feel when operated. As part of the Sugatsune ES-Z008 Series, it supports matching looks across multiple cabinets where the same line is specified.
The Sugatsune ES-Z008-128/AC cabinet pull is built around a 128 mm center to center mounting layout, so installers can use standard 128 mm boring patterns on cabinet doors and drawer fronts. That center to center value also expressed as 5-1/16 inches supports shops that switch between metric and imperial references during layout. Because this pull is a rounded arched design, it bridges the two mounting points in a single sweep, which helps align the visual line of handles across wide cabinet banks. The zinc alloy construction keeps the handle as a single metal component between those mounting positions, which supports consistent feel across all installed pulls.
The Sugatsune ES-Z008 Series 5-1/16 inch center to center pull fits cabinet and furniture applications where a contemporary rustic appearance is specified. Its matte antique copper finish gives the pull a muted metal look, which works in projects aiming for warmer tones on face frames or full-overlay panels. Because the center to center is 128 mm, it suits layouts that already standardize on 128 mm boring for doors and drawers across a kitchen, bath, or built-in run. The rounded arched pull profile spans the 128 mm mounting points in a smooth curve, which provides a uniform sightline when multiple pulls are installed on aligned fronts.
The zinc alloy material defines this product as a metal handle, which keeps the visual match tight when several ES-Z008 pulls are used in the same room. The 5-1/16 inch center to center dimension also sets a moderate spread for the user grip, which works on both smaller doors and wider drawer fronts where a full-length bar is not required. As a Sugatsune America decorative hardware product positioned under handles and pulls, it integrates into hardware schedules that call for consistent manufacturer lines.
The 128 mm center to center specification on this ES-Z008-128/AC cabinet pull is central to repeatable installation, because it lets installers use the same drill template from cabinet to cabinet without resetting measurements. Expressing that spacing as both 128 mm and 5-1/16 inches helps coordinate between metric equipment and imperial drawings, which reduces measurement translation steps on mixed-unit jobs. The rounded arched pull design defines the hand contact point between the two mounting locations, which results in a familiar grip point every time a user operates the door or drawer.
The contemporary rustic matte antique copper finish adds a defined surface character to the zinc alloy body, which helps maintain a consistent appearance from pull to pull on large banks of cabinets. Because the material is zinc alloy, each handle is a solid metal component, which keeps the feel of the pull similar whether mounted on upper cabinets, base cabinets, or furniture pieces. Being part of the Sugatsune ES-Z008 Series also ties this handle to a specific design family, which supports coordinated hardware choices when multiple pulls from the same class are scheduled on a project.
The Sugatsune ES-Z008-128/AC pull has a 5-1/16 inch (128 mm) center to center dimension, which sets the drilling distance between mounting holes on cabinet doors and drawers.
The contemporary rustic matte antique copper finish gives the pull a subdued metal look, which fits designs that favor warmer, less reflective hardware on visible cabinet fronts.
The ES-Z008-128/AC pull is made from zinc alloy, which provides a solid metal handle body for consistent feel across doors and drawers.
This contemporary rustic pull is used on cabinets and similar casework, where a decorative handle with a matte antique copper finish is desired on doors or drawers.
The rounded arched pull design creates a clear gripping area between mounting points, which supports a comfortable handhold when opening cabinet doors and drawers.
The ES-Z008-128/AC part number identifies this pull as a Sugatsune ES-Z008 Series handle with a 128 mm center to center and a matte antique copper finish.
The Sugatsune ES-Z008 Series 5-1/16 inch (128 mm) center to center matte antique copper pull gives installers a defined 128 mm drilling layout, a rounded arched zinc alloy handle body, and a contemporary rustic finish suited to warm-toned cabinet projects. For cabinet and furniture jobs that specify this look and spacing, ordering the ES-Z008-128/AC from Wurth Baer Supply aligns hardware selection with the planned design and mounting pattern.