Sugatsune ES-Z008 pull 128mm identifies this rounded arched pull as part of Sugatsune Americas ES-Z008 Series, so installers get a consistent style reference for repeat cabinet or furniture projects that call for the same hardware look and feel. The 5-1/16 inch, or 128 mm, center to center dimension defines the mounting hole spacing, which directly affects drilling layouts on doors and drawers and keeps alignment predictable across multiple fronts. The white bronze finish is described as a contemporary rustic finish, so it delivers a modern profile with a worn-in tone that can bridge traditional and newer cabinet styles in one run of work. The pull is made from zinc alloy, which provides a solid metal body for daily hand contact while still being workable within typical cabinet hardware machining and handling. As part of decorative hardware and moldings in handles and pulls, this component focuses the design impact on the front of the cabinet, where clients notice it most.
The 128 mm center to center specification sets the distance between mounting points, so layout for this pull centers on two holes spaced 128 mm apart, which matters when replacing existing hardware or drilling new fronts. Because the pull belongs to the ES-Z008 Series and measures 5-1/16 inches center to center, installers can coordinate it with layouts based on imperial or metric measurements without conversion guesswork. The rounded arched form dictates that the mounting points sit at the ends of the arc, guiding where the pull will land relative to door edges and drawer rails. As a zinc alloy component, this pull presents a solid metal body at each mounting point, which supports firm fastening into typical cabinet substrates during installation.
The ES-Z008 PULL 128MM C/C WHITE BRONZE designation places this part in decorative hardware and moldings under handles and pulls, so its primary fit is on cabinet doors and drawers that call for visible front hardware. The white bronze contemporary rustic finish allows this pull to sit comfortably on projects where clients want a bridge between clean contemporary lines and a warmer, aged surface tone. As a rounded arched pull, it suits drawer and door fronts that benefit from a soft, curved form rather than a sharp linear bar, affecting both appearance and how hands meet the hardware. The 5-1/16 inch, or 128 mm, center to center measurement aligns with a widely used mounting size, so it works in layouts built around that spacing across residential or commercial cabinetry. Being part of the Sugatsune ES-Z008 Series from Sugatsune America also helps it pair visually with other pulls in the same family on multi-room or multi-bank installations.
The clearly defined 128 mm center to center dimension on the ES-Z008-128/WB white bronze pull supports repeatable layout, because installers can set drilling equipment or templates one time and carry that spacing across every front. The zinc alloy material means each pull has a metal body, providing a consistent feel when doors and drawers are operated repeatedly over the life of the project. The contemporary rustic finish in white bronze keeps the surface appearance uniform from pull to pull, which matters when rows of cabinets are viewed together under lighting. The rounded arched pull profile positions the grip in a predictable arc between the two mounting points, helping installers align multiple pulls in straight visual lines along rails and stiles. The precise manufacturer part number ES-Z008-128/WB and ES-Z008 Series identification give shops and installers a stable reference, reducing mixups when reordering the same style for future phases or matching existing installations.
The ES-Z008-128/WB pull has mounting holes spaced 128 mm, or 5-1/16 inches, apart, which sets the drilling pattern for doors and drawers using this hardware.
The ES-Z008 PULL 128MM C/C WHITE BRONZE uses a contemporary rustic white bronze finish, giving a modern shape paired with a warmer, aged-style surface tone on cabinet fronts.
The ES-Z008-128/WB pull is made from zinc alloy, providing a metal construction that affects handling during installation and the feel of daily use on doors and drawers.
This Sugatsune ES-Z008 pull sits in decorative hardware and moldings under handles and pulls, so it is used on cabinet doors and drawers as front-facing hardware.
The rounded arched pull design creates a curved handhold between two fixed mounting points, which guides vertical and horizontal positioning on cabinet fronts.
The ES-Z008 Series label and ES-Z008-128/WB part number give an exact style and size reference, supporting consistent selection across multi-cabinet projects.
The ES-Z008-128/WB white bronze pull combines a 5-1/16 inch, or 128 mm, center to center layout with a rounded arched form, giving installers a defined drilling pattern and a curved grip profile. Its contemporary rustic white bronze finish and zinc alloy construction place it firmly in decorative hardware and moldings as a visible design element on cabinet doors and drawers. Using the Sugatsune ES-Z008 Series identification and exact ES-Z008-128/WB part number, choose this pull when a consistent, contemporary rustic appearance and 128 mm mounting spacing are required across a project.