Sugatsune ES-Z010 Series 3-3/4" (96 mm) Center to Center Dark Bronze Pull, - ES-Z010-96/DB

Sugatsune ES-Z010 Pull 96mm For Modern Cabinets

Sugatsune ES-Z010 pull 96mm is a dark bronze cabinet handle designed for modern style projects, so it suits contemporary kitchen, bath, and furniture runs where a clean, updated look is required. The pull has a bold design for the modern style, which gives straight-line installations a defined visual rhythm that helps tie multiple fronts together on a bank of cabinets. Its center to center dimension is 3-3/4 inches, or 96 mm, so it fits layouts drilled on the common 96 mm spread used in many cabinet and drawer fronts. The pull is made from zinc alloy, giving a solid metal feel that supports everyday opening and closing on frequently used fronts. It has a smooth to the touch textured finish, so hands feel a refined surface while still getting extra grip contact when operators reach for doors or drawers.

Key ES-Z010 Dark Bronze Pull Job Advantages

• The bold design for the modern style sets a strong visual line across doors and drawers, which helps installers deliver a consistent contemporary look on full cabinet runs.
• The dark bronze color gives strong contrast against many light cabinet finishes, so the pull edge remains easy to locate by hand in busy work areas.
• The smooth to the touch textured finish keeps the hand contact point comfortable while still offering a subtle surface variation that can help reduce slipping when fingers are damp or dusty.
• The zinc alloy material provides a metal body that supports repeated use on active cabinets, which helps maintain a solid feel when opening and closing throughout daily operation.
• The 3-3/4 inch, 96 mm center to center size matches a widely used drilling pattern, helping simplify layout when aligning multiple handles on doors and drawers along the same run.

Installation Fit For 3-3/4 Inch Hole Spacing

The center to center: 3-3/4 inch (96 mm) dimension defines how this pull fits pre-drilled cabinet fronts, so it aligns with standard 96 mm boring patterns common in many shop jigs. Using this spacing, installers can run a single drilling setup across doors and drawers and then position the Sugatsune ES-Z010-96/DB pull directly over those holes, which supports fast, repeatable alignment along long stretches of cabinetry. The bold design for the modern style pairs with this consistent hole spacing, so even slight layout variations in the casework are visually masked by the uniform handle line. Because the pull is made from zinc alloy, tightening it to the front provides a stable metal connection that supports repeated hand force at this mounting span.

Using This Dark Bronze Pull In Real Projects

Where The Sugatsune ES-Z010-96/DB Pull Fits Best

The Sugatsune ES-Z010 Series 3-3/4 inch (96 mm) center to center dark bronze pull works on cabinet and drawer fronts drilled at 96 mm, so it suits many factory-bored fronts and shop-built pieces using that pattern. The bold design for the modern style makes it a match for flat-panel and other streamlined door styles, where the handle needs to carry most of the visual detail. Its dark bronze finish brings a deeper tone to the face of the cabinet, so it can be used to frame lighter fronts or to blend with other dark bronze decorative hardware and moldings in the same space. Because the pull is part of the Sugatsune decorative hardware and moldings category, it can be paired with other Sugatsune America handles and pulls to maintain a consistent hardware family throughout a job. The 96 mm center to center dimension also suits shorter drawer fronts where a compact yet substantial pull is needed without crowding the edges.

Why ES-Z010 Details Support Clean, Repeatable Results

The 96 mm center to center sizing on this zinc alloy dark bronze pull ties directly into common drilling jigs, so it helps shops run repetitive boring operations while keeping handle placement consistent across multiple fronts. The smooth to the touch textured finish means installers and users feel an even surface when they pull, which reduces distraction from roughness at the contact point and keeps the focus on overall alignment and reveal. Because the pull is made of zinc alloy, it provides a predictable weight and stiffness when mounted at that span, supporting reliable tightening torque and long-term feel during daily use. The bold design for the modern style also hides minor variances in door gap perception, because the strong handle line draws the eye along the hardware rather than to small casework shifts. As part of Sugatsune decorative cabinet hardware, this pull aligns visually with modern project specifications that call for coordinated handles and pulls from a single source.

Common Questions About The ES-Z010 Dark Bronze Pull

Choose This Pull For 96 mm Modern Installations

The Sugatsune ES-Z010 Series 3-3/4 inch (96 mm) center to center dark bronze pull gives shops and installers a bold design for the modern style on standard 96 mm layouts, linking directly to common drilling patterns. Its zinc alloy construction and smooth to the touch textured finish support comfortable, repeated use on active cabinet and drawer fronts, so the hardware performs along with the casework. For projects calling for coordinated decorative hardware and moldings, this Sugatsune America handle and pull option aligns visual style and common sizing on a single part number, ES-Z010-96/DB.