Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Sugatsune ES-Z403 is a bar-form cabinet pull finished in Dark Bronze, suited to doors and drawer fronts where the hardware should carry some visual weight without reading as ornate.
The 5-1/16 inch (128 mm) center-to-center spacing is one of the standard hole patterns across the industry, which makes this pull a direct replacement candidate on a wide range of existing installations as well as a natural specification for new work. At 6-1/8 inches overall, it reads well on a base-cabinet drawer front that is 15 to 24 inches wide, and it scales equally well on a tall upper door where a shorter pull would look undersized. The low 15/16 inch projection keeps knuckle clearance tight to the front, which suits frameless and slab-door builds where a deep-standing pull would break the flush geometry.
Dark Bronze is a finish with real depth to it. It is warmer than an oil-rubbed bronze and darker than an antique brass, landing in the territory that reads well against white oak, painted sage, charcoal, or warm-toned wood fronts without fighting any of them. The finish sits on a zinc body, which is the standard construction for this class of hardware and delivers consistent color and form across a full installation. The 1-3/4 inch bar width is wider than a typical round or narrow-square bar pull, giving the pull a flat, plank-like face that catches light across its width rather than along a single edge.
Designers working transitional kitchens and baths reach for Dark Bronze when the palette is warm-neutral and the cabinetry is meant to anchor the room rather than recede into it. Cabinet shops building to a designer's specification will find the standard center-to-center makes this straightforward to drill without custom setups. Contractors replacing hardware on an existing job drilled to 128 mm can swap this in directly. The ES-Z403 series is broad enough that a full kitchen can run pulls on drawers and companion hardware on doors within the same collection, keeping the hardware program coherent across the whole installation.
Dark Bronze is a distinct finish name specific to the ES-Z403 series. It carries a warm, deep tone but is not interchangeable with oil-rubbed bronze from another brand or series, which may vary significantly in undertone and sheen level.
The bar is 1-3/4 inches wide, giving it a broad, flat face rather than the rounded profile of a standard cylindrical bar pull. It sits flush and wide against the door front.
Yes. The center-to-center is 5-1/16 inches (128 mm), which is a standard spacing. Confirm your existing holes are at that spacing before ordering.
The ES-Z403 series includes additional hardware in matching finishes. Look for other ES-Z403 SKUs to build a coordinated program.
When the cabinetry runs warm and the hardware should match that energy, Dark Bronze delivers a finish that works across the full room without demanding attention for itself.