Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Sugatsune HH-P130 is a recessed pull from the HH Series, set flush into a routed pocket in a cabinet door or drawer front. At 5-1/8 inches (130 mm) long, it is the longer of the two pulls in this series, giving a wider finger span across the grip opening for mid-to-large fronts.
A recessed pull routes into the face of the front rather than fastening through two drilled holes, so the grip disappears when the hand is not in it. The 130 mm length spans enough of a wider drawer or a taller door that two or three fingers fit comfortably across the full opening, which matters on a heavy pantry front or a full-height wardrobe panel more than it does on a narrow upper cabinet. For cabinetry at or above shoulder height, the longer pull is easier to reach across and pull toward the body in a single motion. The shorter pull in this series handles narrower fronts; this one steps up where the scale of the front calls for it.
The pull is molded in PVC in a Clear finish. Clear PVC is nearly invisible against a light-colored or natural door face, and it reads as a line rather than a hardware element against darker fronts. Because the material is plastic rather than metal, it will not mark a painted or lacquered door face from behind the way a metal pull can in a tight pocket. The finish name is Clear, and it is the manufacturer's own designation for this SKU.
This pull suits designers and cabinet shops building contemporary or minimalist programs where surface hardware would interrupt a clean face. It works on slab-front cabinetry, flat-panel wardrobe systems, and appliance garage doors where the design intent is that the hardware should not be visible at rest. The 130 mm length is the right choice when the front is wide enough that the shorter pull would feel undersized, or when the installation calls for a grip that spans the center of the panel more fully. It is an indoor product for dry cabinetry environments.
The pocket dimensions are set by the pull's 5-1/8 inch (130 mm) length and 1-1/4 inch (32 mm) width. Refer to Sugatsune's installation documentation for the exact routed depth and cutout tolerances before machining.
Yes. A recessed pull works on either, provided the front is thick enough to accept the pocket depth the pull requires. The grip motion is the same on both applications.
Yes. The HH Series includes a 4-5/8 inch (117 mm) pull in the same profile and finish, suited to narrower fronts in the same program.
PVC is a durable plastic, but like any light-colored material it can show marks from heavy daily use over time. For high-traffic cabinetry, consider the frequency of use alongside the finish choice.
Choose the 130 mm pull when the front is wide enough to call for a longer span and the design program calls for hardware that disappears into the face rather than sitting on top of it.